纺织学报 ›› 2017, Vol. 38 ›› Issue (08): 50-54.doi: 10.13475/j.fzxb.20160506806

• 纺织工程 • 上一篇    下一篇

废弃涤纶织物/氯化聚乙烯复合材料的隔声性能

  

  • 收稿日期:2016-05-30 修回日期:2017-04-14 出版日期:2017-08-15 发布日期:2017-08-10

Sound insulation properties of waste polyester fabric/chlorinated polyethylene composites

  • Received:2016-05-30 Revised:2017-04-14 Online:2017-08-15 Published:2017-08-10

摘要:

为解决废旧纺织纤维资源化利用问题和日常生活中的噪声污染,采用废弃涤纶织物与氯化聚乙烯逐层贴合,热压制得具有良好隔声效果的隔声复合材料。通过对废弃涤纶织物、纯氯化聚乙烯(CPE)板、废弃涤纶织物/CPE层合隔声材料的隔声量曲线分析发现,废弃涤纶织物/CPE层合复合材料的隔声性能最好;改变废弃涤纶织物层数、面密度和加压压力,制得不同参数的废弃涤纶织物/CPE层合复合材料。通过对隔声量曲线分析可知,随废弃涤纶织物层数、材料面密度和加压压力的增加,其隔声量提高;对隔声复合材料的隔声量进行理论计算,并与实际测量值进行对比分析,结果表明理论计算值与实际测量值有较好的吻合性。

关键词: 废弃涤纶织物, 隔声性能, 复合材料, 隔声量, 氯化聚乙烯

Abstract:

In order to resolve the peoblems on the waste textile fibers recycling and the noise pollution in daily life, composite with good sound insulation property were prepared from waste polyester fabric and chlorinated polyethylene (CPE) by a hot-processing method. Firstly, it was found that the sound insulation property of the waste polyester fabric/CPE composites was the best according to the sound insulation curves of waste polyester fabrics, CPE plate and waste polyester fabric/CPE composites. Secondly, the sound insulation properties of the composites which were prepared by changing the waste polyester fabric layer number and density and pressure were tested. It was showed that the sound insulation property were improved by increasing the waste polyester fabric layer number and density and pressure. Then, the sound insulation quantity of the composite was calculated according to a theoretical model. By comparisons of theoretically calculated and actually measured value of the sound insulation quantity, it is showed that the the theoretically calculated values have good match with the actually measured values.

Key words: waste polyester fabric, sound insulation property, composite, sound insulation quantity, chlorinated polyethylene

[1] 万振凯 李鹏 贾敏瑞 包玮琛 裘旭光. 智能复合材料中碳纳米管纱线参数设计及其变化特征[J]. 纺织学报, 2018, 39(06): 58-63.
[2] 贾树生 万振凯 杨连贺 张恒杰. 碳纳米线的拉伸应变传感特性[J]. 纺织学报, 2018, 39(03): 14-18.
[3] 黄婕妤 吕鹏飞 姚壹鑫 魏取福. 细菌纤维素/涤纶非织造布自编织复合材料的制备及其性能[J]. 纺织学报, 2018, 39(02): 126-131.
[4] 孙颖 刘俊岭 郑园园 陈利 李嘉禄. 碳/芳纶混编三维编织复合材料拉伸性能[J]. 纺织学报, 2018, 39(02): 49-54.
[5] 高哲 蒋高明. 多轴向经编曲面复合材料汽车门低速碰撞数值模拟[J]. 纺织学报, 2018, 39(02): 43-48.
[6] 贾树生 杨连贺 白会肖 万振凯 . 嵌入三维编织复合材料的碳纳米线应变传感特性[J]. 纺织学报, 2018, 39(01): 11-18.
[7] 李晓英 马丕波 聂小林 蒋高明. 曲面三维横编间隔织物复合材料的压缩性能[J]. 纺织学报, 2018, 39(01): 62-65.
[8] 耿奕 蒋金华 陈南梁. 经编四轴向玻璃纤维织物的渗透行为和渗透率[J]. 纺织学报, 2017, 38(10): 49-56.
[9] 周其洪 李青青 陈革. 变径变纬密管状织物的控制模型及其算法实现[J]. 纺织学报, 2017, 38(10): 113-117.
[10] 高雄 胡侨乐 马颜雪 张琦 魏毅 邱夷平. 不同结构厚截面三维机织碳纤维复合材料的弯曲性能对比[J]. 纺织学报, 2017, 38(09): 66-71.
[11] 万振凯 张志刚 贾敏瑞 包玮琛 董卿霞. 基于碳纳米线传感器的三维六向编织复合材料内部损伤定位[J]. 纺织学报, 2017, 38(08): 68-74.
[12] 马倩 王可 金利民. 三维角联锁机织复合材料的冲击破坏有限元模拟分析[J]. 纺织学报, 2017, 38(07): 63-68.
[13] 应志平 吴震宇 汪茂林 周香琴 胡旭东. 基于气缸的三维机织增强体织造系统设计[J]. 纺织学报, 2017, 38(06): 124-129.
[14] 万振凯 贡丽英 万莉. 基于损伤指数的三维编织复合材料结构损伤评估[J]. 纺织学报, 2017, 38(05): 69-74.
[15] 周步光 张宇慧 王平 王强 范雪荣. 丝素/丙烯酰胺/丙烯酸吸水复合材料的紫外光辐照法制备[J]. 纺织学报, 2017, 38(05): 25-30.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!