纺织学报 ›› 2018, Vol. 39 ›› Issue (10): 149-155.doi: 10.13475/j.fzxb.20171101207

• 管理与信息化 • 上一篇    下一篇

针织装备云平台的构建技术

    

  1.  
  • 收稿日期:2017-11-08 修回日期:2018-07-15 出版日期:2018-10-15 发布日期:2018-10-17
  • 基金资助:

     

Construction technology of knitting equipment networking cloud platform

    

  • Received:2017-11-08 Revised:2018-07-15 Online:2018-10-15 Published:2018-10-17

摘要:

为了实现对针织装备监测与控制,各针织企业主要采用各自建网和单独研发管理系统等方式,存在布网困难、无法互联互通、成本高等问题。提出采用布局便捷、成本低的无线局域网络,并接入互联网,构建统一的机联网平台,设计针织装备统一的互联互通协议,涵盖圆纬机、横机、经编机等3类主要针织装备,实现各企业的针织装备与云平台间能直接进行数据交互,云平台对生产数据实时处理,并存入云数据库系统,为针织企业提供统一的MES等服务功能。结果证明:针织装备通过云平台实现了互联互通,基本满足企业基于云平台的管理需求,并为针织行业奠定了大数据分析基础。

关键词: 机联网, 云平台, 针织装备, 互联互通

Abstract:

In order to realize the monitoring and control knitting equipment, the knitting enterprise mainly adopts the respective network and separate R & D management system with the problems of difficult networking, incapability of interconnecting and intercommunicating, and high cost. The wireless local area network with convenient layout and low cost was proposed and accessed into the Internet, a unified platform was built, unified interconnection and intercommunication of agreement of knitting equipment was designed, covering three main types of knitting equipment of the circular knitting machine, the knitting machine and the warp knitting machine, and directly data exchange between the knitting equipment of all enterprises with the cloud platform was realized. The cloud platform real-time processed the production data, stored them in the cloud database system, and provided a unified MES service function for knitting enterprises. The experiment results prove that knitting equipment realizes interconnection and intercommunication by cloud platform, meeting the management needs of enterprises based on the cloud platform, and laying the foundation for big data analysis for knitting industry.

Key words: Internet of machine, cloud platform, knitting equipment, interconnection and intercommunication

[1] 胡旭东 沈春娅 彭来湖 汝欣. 针织装备的智能制造及互联互通标准验证[J]. 纺织学报, 2017, 38(10): 172-177.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 曹亚春;柳德康;徐福华;戴琦兴;许逊;陈如荣. 一种改进的试样复摇车[J]. 纺织学报, 1986, 7(05): 45 -46 .
[2] 丁志荣. 纺纱工艺在线设计与监控系统的技术探讨[J]. 纺织学报, 2004, 25(03): 26 -27 .
[3] 周宏湘. 真丝绸活性染料染色理论和实践的进展(上)[J]. 纺织学报, 1985, 6(07): 60 -62 .
[4] 林子务. 状态维修的设备考核指标与激励机制探讨[J]. 纺织学报, 2003, 24(05): 99 -101 .
[5] 郑秀实. 第七次全国苧麻技术协作活动在重庆市举行[J]. 纺织学报, 1987, 8(03): 10 .
[6] 陈冰;陈银;王红卫. 低温氩等离子体表面改性提高PET亲水性[J]. 纺织学报, 2007, 28(6): 28 -31 .
[7] 徐中强;翁晓明. 用836胶辊与RC-Ⅱ涂料提高成纱条干均匀度[J]. 纺织学报, 1984, 5(08): 51 -53 .
[8] 聂毓洪. 提高混纺纱强力的合理混纺比[J]. 纺织学报, 1996, 17(04): 61 -62 .
[9] 姚永德. 弹性聚氨酯纤维与活性染料间的相互作用[J]. 纺织学报, 1985, 6(08): 17 -20 .
[10] 祝勇;王正肖;. 基于MIP和AHP的服装批发供应链多目标规划[J]. 纺织学报, 2010, 31(10): 146 -150 .