纺织学报 ›› 2010, Vol. 31 ›› Issue (7): 43-45.

• 纺织工程 • 上一篇    下一篇

甲酸处理后精纺毛织物耐磨性能及其纤维断裂端形态的变化

王莉;姚金波   

  1. 天津工业大学
  • 收稿日期:2009-07-29 修回日期:2010-01-08 出版日期:2010-07-15 发布日期:2010-07-15
  • 通讯作者: 姚金波

Abrasion resistance of worsted fabric treated with formic acid morphological changes of rupture end

Wang Li; YAO Jinbo   

  1. Tianjin Polytechnic University
  • Received:2009-07-29 Revised:2010-01-08 Online:2010-07-15 Published:2010-07-15
  • Contact: YAO Jinbo

摘要:

羊毛织物经极性有机溶剂处理可以提高其耐磨性。在不同温度和时间下,选用甲酸对精纺毛织物进行处理,再经马丁代尔平磨仪摩擦处理10 000次后,对摩擦前后的织物进行称量。实验结果证明:若处理温度高于90 ℃,织物的质量损失会逐渐增大;而当处理时间是12 h, 处理温度为20 ℃时,织物的质量损失最小。另外,从磨损织物中选取适量的纤维进行扫描电镜观察发现,纤维断裂面主要呈现3种形态,即原纤化断裂面、圆形断裂面及横向断裂面,其中未处理样及低温处理后纤维的断裂面以原纤化断裂面居多,高温处理后以圆形断裂面居多。

Abstract:

The abrasion resistance of wool fabrics can be improved by treatment with polar organic solvent. Worsted fabrics were treated with formic acid at different temperatures and time, and then subjected to 10 000 rubs by Martindale abrasion. Then weight the fabrics before and after treatment. The results indicated that the weight loss of fabric increased gradually when the temperature of treatment was above 90 ℃ and the minimum weight loss was observed when the fabric was treated at 20 ℃ for 12 hours. SEM test revealed that the broken fiber sections exhibited three forms, i.e., fibrillated fiber ends, round fiber ends and transversely fractured fiber ends. Fibrillated fiber ends dominated in the fabrics untreated or treated with low temperature, and chiefly round fiber ends appeared with the fabrics treated with high temperature.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!