纺织学报 ›› 2011, Vol. 32 ›› Issue (10): 127-0.

• 机械与器材 • 上一篇    下一篇

伺服式经纱张力速度分散控制研究

彭志辉,马光,周晨   

  1. 温州大学
  • 收稿日期:2010-10-08 修回日期:2011-05-27 出版日期:2011-10-15 发布日期:2011-10-24
  • 通讯作者: 彭志辉 E-mail:pzh_0327@yahoo.cn

Study on tension and velocity decentralized control of let-off system with servo control

  • Received:2010-10-08 Revised:2011-05-27 Online:2011-10-15 Published:2011-10-24

摘要: 针对经纱卷绕过程中卷径变化导致张力和速度的时变和非线性扰动等特性,及对控制系统的稳定性、精度和动态性能产生严重的影响,提出了一种以伺服控制器为执行元件的经纱张力速度分散控制。首先,建立了放经棍精确的数学模型;其次,将张力调节解耦为张力速度协调控制;最后,给出了开卷棍参考速度算法,并且与前馈补偿算法、PID控制算法有机结合,构成了放经棍恒张力控制系统。本文以经纱为控制对象,对传统分散PI控制和本文提出的控制进行实验对比分析。实验结果表明:本文提出的控制策略能有效地抑制卷径变化对张力的影响,且精度高、响应速度快、鲁棒性强和适应范围广等优点。

Abstract: To solve the change of Web diameter resulting in the warp tension and velocity becoming more complicated, time-varying and non-linear, which has a severe influence on performance of let-off system controller, such as stability, accuracy and dynamic performance, this paper presents a warp tension and velocity decentralized control with servo controller as actuator. First, an accurate dynamic model is developed for the let-off system; Second, the let-off system is decoupled into the constant tension control and the velocity control; Finally, a strategy for computing reference velocity of let-off is presented, which integrated with feed-forward control, PID control, being composed of the constant tension controller. An experimental analysis between general decentralized PI controller and proposed decentralized controller show that proposed decentralized controller is capability of suppressing the disturbance more effectively and has better accuracy, faster response, more robust and wide range of applications broader.

中图分类号: 

  • TS103.7
[1] 刘月刚 马崇启 吕汉明 刘晓华 谢松才 亓焕军. 竹节纱工艺管理信息系统的开发与应用[J]. 纺织学报, 2013, 34(10): 141-0.
[2] 姚俊红. 络筒机用计长仪的研制[J]. 纺织学报, 2012, 33(9): 126-129.
[3] 陈德传 卢玲. 交流力矩电动机式织物卷绕控制方法[J]. 纺织学报, 2011, 32(6): 146-150.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!