Kronecker 积在变化绉组织设计中的应用

纺织学报 ›› 2012, Vol. 33 ›› Issue (5): 40-45.

Kronecker 积在变化绉组织设计中的应用

王旭,毕松梅

安徽工程大学纺织面料安徽高校重点实验室

收稿日期:2011-06-17 修回日期:2012-02-15 出版日期:2012-05-15 发布日期:2012-05-15
通讯作者: 毕松梅 E-mail:bisongmei@hotmail.com

Application of Kronecker product on derivative crepe weave design

WANG Xu, BI Song-Mei

Anhui Provincial Key Laboratory of Textile Fabric, Anhui Polytechnic University

Received:2011-06-17 Revised:2012-02-15 Online:2012-05-15 Published:2012-05-15
Contact: Song-Mei BI E-mail:bisongmei@hotmail.com

摘要/Abstract

摘要： 为提高绉组织的设计效率，本文提出一种基于矩阵Kronecker积的变化绉组织矩阵生成方法。按照变化绉组织设计的构作原理，对已有绉组织矩阵，运用Kronecker积分别实现了不同组织的相互嵌入，组织点加强以及组织点置换等变化绉组织矩阵的生成。研究表明：采用矩阵的Kronecker积运算，可以方便地实现基于嵌入法、加强法和置换法的变化绉组织矩阵的设计。研究结果显示，随嵌入组织不同、加强方法不同或置换组织不同，可生成风格各异的变化绉组织矩阵。该方法丰富了绉组织的设计思路，提高了设计效率。

关键词: 变化绉组织 , 嵌入法 , 加强法 , 置换法 , Kronecker 积

Abstract: To improve the efficiency for design crepe weave, the generation method of derivative crepe weave matrix based on Kronecker product was studied in present study. According to the design rule for derivative crepe weave, the weave matrix resulted from different methods such as embedding method, reinforcement method and replacement method to the prototype crepe weave were fulfilled by Kronecker product method. The results indicated that Kronecker product can be used to design derivative crepe weave based on embedding method, reinforcement method and replacement method conveniently and automatic generate crepe weave matrix with different styles due to different embedded weave, different reinforcement method or different replaced weave. This method expands design idea and provides an effective tool for crepe weave.

Key words: derivative crepe weave , embedding , reinforcement , Kronecker product

中图分类号:

TS107

王旭, 毕松梅. Kronecker 积在变化绉组织设计中的应用[J]. 纺织学报, 2012, 33(5): 40-45.

WANG Xu, BI Song-Mei. Application of Kronecker product on derivative crepe weave design[J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(5): 40-45.

参考文献

[1]施国生,梁道雷.多臂织物组织矩阵的自动设计[J].纺织学报,2002,23(6):60-61
[2]祝成炎.大循环双层多臂组织CAD技术的研究[J].纺织学报,2001,22(6):37-38
[3]陈俊琰,汪军.变化及复杂织物组织的计算机自动生成[J].东华大学学报自然科学版,2007,33(2):207-211
[4]顾平.数学函数的组织异化数学模式—织物规则组织CAD的新生成法[J].丝绸,2001,(11):9-11
[5]潘如如,高卫东,钱欣欣,张晓婷.基于意匠图的机织物组织自动分析[J].纺织学报,2010,31(11):30-34
[6]PAN Ruru, GAO Weidong, LIU Jihong, et al.Automatic recognition of woven fabric based on pattern database[J].Fibers and Polymers,2010,11(2):303-308
[7]袁惠芬,王旭.基于特征子阵匹配的织物组织分析[J].纺织学报,2009,30(9):45-48
[8]赵良臣.绉组织穿综设计原理与方法[J].浙江丝绸工学院学报,1989,6(4):11-15
[9]赵良臣.绉组织纹版设计理论探讨[J].纺织学报,1987,8(12):45-49
[10]张秋勇,祝成炎..绉组织的复合设计[J].丝绸,1998,(3):37-39
[11]袁惠芬,王旭.几种常用绉组织的计算机实现方法[J].棉纺织技术,2010,38(9):10-13
[12]施国生,赵良臣.五片综绉组织矩阵的设计[J].纺织学报,1997,18(4):27-28
[13]袁惠芬,王旭.基于省综法的5片综绉组织矩阵模型[J].纺织学报,2010,31(9):29-32

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed