三维角联锁机织复合材料三点弯曲破坏的有限元计算

纺织学报 ›› 2014, Vol. 35 ›› Issue (3): 41-0.

三维角联锁机织复合材料三点弯曲破坏的有限元计算

王春霞¹ 宋孝浜¹ 金利民²

1. 盐城工学院纺织服装学院
2. 中国科学院上海应用物理研究所

收稿日期:2013-04-22 修回日期:2013-10-04 出版日期:2014-03-15 发布日期:2014-03-11

Finite element calculation for three-point bending damage of three-dimensional angle-interlock woven composites

Received:2013-04-22 Revised:2013-10-04 Online:2014-03-15 Published:2014-03-11

摘要/Abstract

摘要： 为了说明一种层层接结三维角联锁机织复合材料在三点弯曲载荷下的动态响应以及结构破坏行为，运用有限元分析软件ABAQUS，在纱线、基体细观结构尺度上计算与考察材料在一恒速弯曲应力作用下的挠度随时间的变化历程、渐进破坏过程、应力分布以及应力集中区域的结构效应。通过分析计算结果发现：三维角联锁机织复合材料的三点弯曲破坏与其结构特征密切相关，破坏由结构中的应力集中区域萌发。此外，应力集中部位主要位于屈曲波浪状的经纱上，且处于各根经纱的弯折部位。这种结构特征使其在材料承载过程中受到的载荷最大，从而导致破坏的进一步扩展。

关键词: 角联锁, 复合材料, 三点弯曲, 有限元

Abstract: In order to describe the dynamic responses and structural damage behavior of one type of layer-to-layer three-dimensional angle-interlock woven composite under three-point bending loading condition, the deflection-time curve，damage evolution, stress distribution and structural effects at regions of stress concentration of the composite under the bending loading condition of constant velocity were calculated by finite element analysis (FEA) software ABAQUS in the microstructural level of yarn and resin. By analyzing the calculation results, it was found that there was a close relationship between the structural characteristics and the bending damage of the composite, the damage was initialled at the regions of stress concentration. In addition, these regions located at the wave-shape parts of undulated warp yarns, such structural characteristic induced these regions to carry the majority part of load, and the further damage evolution.

Key words: angle-interlock, composite, three-point bending, finite element

王春霞宋孝浜金利民. 三维角联锁机织复合材料三点弯曲破坏的有限元计算[J]. 纺织学报, 2014, 35(3): 41-0.

参考文献

相关文章 15

[1]	万振凯李鹏贾敏瑞包玮琛裘旭光. 智能复合材料中碳纳米管纱线参数设计及其变化特征[J]. 纺织学报, 2018, 39(06): 58-63.
[2]	陈扬杨允出张艺强范艳娟金艳苹. 电加热服装中加热片与织物组合体的稳态热传递模拟[J]. 纺织学报, 2018, 39(05): 49-55.
[3]	贾树生万振凯杨连贺张恒杰. 碳纳米线的拉伸应变传感特性[J]. 纺织学报, 2018, 39(03): 14-18.
[4]	黄婕妤吕鹏飞姚壹鑫魏取福. 细菌纤维素/涤纶非织造布自编织复合材料的制备及其性能[J]. 纺织学报, 2018, 39(02): 126-131.
[5]	孙颖刘俊岭郑园园陈利李嘉禄. 碳/芳纶混编三维编织复合材料拉伸性能[J]. 纺织学报, 2018, 39(02): 49-54.
[6]	高哲蒋高明. 多轴向经编曲面复合材料汽车门低速碰撞数值模拟[J]. 纺织学报, 2018, 39(02): 43-48.
[7]	韩晨晨程隆棣高卫东薛元杨瑞华. 基于有限元模型的喷气涡流纺纤维运动轨迹模拟[J]. 纺织学报, 2018, 39(02): 32-37.
[8]	贾树生杨连贺白会肖万振凯 . 嵌入三维编织复合材料的碳纳米线应变传感特性[J]. 纺织学报, 2018, 39(01): 11-18.
[9]	李晓英马丕波聂小林蒋高明. 曲面三维横编间隔织物复合材料的压缩性能[J]. 纺织学报, 2018, 39(01): 62-65.
[10]	吕丽华黄耀丽崔婧蕊. 蜂窝状三维整体机织复合材料的弯曲性能及其有限元模拟[J]. 纺织学报, 2017, 38(11): 56-60.
[11]	李瑛慧谢春萍刘新金. 三原组织织物拉伸力学性能有限元仿真[J]. 纺织学报, 2017, 38(11): 41-47.
[12]	耿奕蒋金华陈南梁. 经编四轴向玻璃纤维织物的渗透行为和渗透率[J]. 纺织学报, 2017, 38(10): 49-56.
[13]	周其洪李青青陈革. 变径变纬密管状织物的控制模型及其算法实现[J]. 纺织学报, 2017, 38(10): 113-117.
[14]	高雄胡侨乐马颜雪张琦魏毅邱夷平. 不同结构厚截面三维机织碳纤维复合材料的弯曲性能对比[J]. 纺织学报, 2017, 38(09): 66-71.
[15]	吕丽华毕吉红于翔钱永芳赵玉萍. 废弃涤纶织物/氯化聚乙烯复合材料的隔声性能[J]. 纺织学报, 2017, 38(08): 50-54.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed