织物折皱回复角测试方法比较

纺织学报 ›› 2015, Vol. 36 ›› Issue (01): 60-63.

织物折皱回复角测试方法比较

收稿日期:2013-11-29 修回日期:2014-09-19 出版日期:2015-01-15 发布日期:2015-01-15

Comparison of test methods for fabric wrinkle recovery angle

Received:2013-11-29 Revised:2014-09-19 Online:2015-01-15 Published:2015-01-15

摘要/Abstract

摘要：

针对现有的测量方法存在测试过程自动化程度低，测量结果精度不高等弊端，以YG541E型全自动激光织物折皱弹性测试仪、SDL-M003A型折皱回复角试验机和自主研发基于视频序列的JN-1型织物折皱回复性能动态测试仪为测试仪器，将折皱回复角变异系数CV值作为评价指标，对比了3种织物折皱回复角测试方法。结果表明，基于视频序列的JN-1型织物折皱回复性能动态测试仪测量结果准确、稳定，且具有自动化程度高的特点，可为织物折皱回复性能的测试研究提供可靠有效的技术手段。

Abstract:

Several drawbacks exist in the state-of-art measurements for fabric wrinkle recovery，such as low degree of automation and inaccurate measurement results．In this paper, YG541E automatic laser fabric wrinkle recovery tester，SDL-M003A wrinkle recovery angles tester and JN-1 fabric wrinkle recovery dynamic tester based video sequences for the test equipments，the wrinkle recovery angle CVvalue as the evaluation index．Experimental results show that the type of JN-1 fabric wrinkle recovery dynamic tester based video sequences is the most accuracy and stability and has a high degree of automation．It provides a reliable and effective technical hands for the test study of fabric wrinkle recovery performance．

张月王蕾刘建立高卫东. 织物折皱回复角测试方法比较[J]. 纺织学报, 2015, 36(01): 60-63.

参考文献

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

本文评价

推荐阅读 10

[1]	钱坤;王鸿博;王纯凤. 超细纤维洁净布的设计与生产[J]. 纺织学报, 2004, 25(04): 84 -86 .
[2]	方丽英;袁观洛. 氨纶机织物性能与缝纫质量关系的研究[J]. 纺织学报, 2004, 25(03): 57 -58 .
[3]	薛华平;陆奎元;张振. 变化条纹组织简易制织方法的探索[J]. 纺织学报, 1982, 3(10): 46 -48 .
[4]	黄立新. 细旦高密涤纶短纤织物的上浆工艺研究[J]. 纺织学报, 2003, 24(04): 77 -78 .
[5]	李瑞洲;刘亚利;孙占宾. 竹浆纤维性能分析[J]. 纺织学报, 2004, 25(03): 76 -77 .
[6]	过志豪. 氨纶纤维强伸性能对纺织加工的影响[J]. 纺织学报, 1990, 11(04): 30 -32 .
[7]	冯兆震;刘冠峰;陈纯无. 控制煮茧用水硬碱度的研究[J]. 纺织学报, 1989, 10(08): 19 -22 .
[8]	冯毅力. 多台纤维强伸度仪与微机通信方法[J]. 纺织学报, 1998, 19(02): 23 -24 .
[9]	顾平;朱萍. 真丝纺类织物实际可织区域与计算机辅助设计法[J]. 纺织学报, 1993, 14(11): 25 -28 .
[10]	魏进飞;徐大孚. 国产新型并条机的对比[J]. 纺织学报, 1993, 14(03): 48 .