纺织学报 ›› 2015, Vol. 36 ›› Issue (10): 54-61.

• 纺织工程 • 上一篇    下一篇

二维三轴向编织混杂层合复合材料的冲击性能

  

  • 收稿日期:2014-08-18 修回日期:2015-07-15 出版日期:2015-10-15 发布日期:2015-10-12

Investigation on impact properties of 2-D triaxial braided-hybrid laminated composites

  • Received:2014-08-18 Revised:2015-07-15 Online:2015-10-15 Published:2015-10-12

摘要:

为探讨混杂结构与破坏机制关系。本文研究了在铺层数目相同时,4组二维三轴编织碳纤维/玻纤纤维混杂层合复合材料受到低速冲击后的冲击性能。实验结果表明,在相同铺层数目情况下,编织混杂层合复合材料冲击后表面产生裂纹均比纯碳纤或纯玻纤编织层合复合材料多,且正面裂纹纵向扩展范围较大,而背面裂纹横向扩展范围较大;碳纤+玻纤+碳纤编织层合复合材料单位厚度吸收的能量比纯碳纤编织层合复合材料提高7.61%;玻纤+碳纤+玻纤编织层合复合材料单位厚度吸收的能量比纯玻纤编织片层合复合材料提高2.21%;编织混杂层合复合材料冲击后在厚度方向产生的损伤扩展较少;编织层合复合材料在低速冲击作用下不易分层,通过合适的铺层方式及纤维组合能够实现正的混杂效应,并能有效改善材料的抗冲击性能。

Abstract:

In order to investigate the relationship between the hybrid structure and the failure mechanism, the impact properties of 2-D triaxial braid-hybrid laminated composites with same layers, under low impact velocity, were investigated. In the case of same laminating layers, the cracks generated on the surface of braid-hybrid laminated composites were more than that on the surface of braid non-hybrid laminated composites. And the extending range of cracks on the impacted surface was larger along the longitudinal direction, while on the back surface, it was larger along the transverse direction. The absorbed energy per thickness of carbon fiber + glass fiber+ carbon fiber braided laminated composite was 7.61% higher than the composites composed of only carbon fiber layers, while the glass fiber+ carbon fiber +glass fiber braided laminated composite increased by 2.21% than the glass fiber braid laminates. The hybrid laminated composites generated less damage propagation along thickness direction. The braid laminated composites can’t delaminate easily under low velocity impact. And the impact properties can be effectively improved through suitable hybrid laminating and fiber combination to achieve positive hybrid effect.

中图分类号: 

  • V258+.3
No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 沈世德;吕仕元. 综框运动规律新探[J]. 纺织学报, 1991, 12(10): 16 -17 .
[2] 臧昆;马继华;杨载明. 杜邦型变形喷嘴两个结构参数的理论计算公式[J]. 纺织学报, 1987, 8(11): 31 -33 .
[3] 刘菁芳. HAS-Ⅱ型手用式空气捻接器通过技术鉴定[J]. 纺织学报, 1987, 8(11): 14 .
[4] 王利军**;侯毓汾. 染料结构与其在桑丝织物上鲜艳度之间的关系[J]. 纺织学报, 1991, 12(01): 24 -26 .
[5] 张立荣. 液体硫化染料投入批量生产[J]. 纺织学报, 1993, 14(04): 12 .
[6] 周廷华;刘艺. HS-4酸解淀粉在JT/C13特品种上的应用[J]. 纺织学报, 1988, 9(01): 10 .
[7] 王秋美. 纵行卷曲对罗纹针织物横向尺寸特性的影响[J]. 纺织学报, 2001, 22(02): 32 -33 .
[8] 谭艳;杜庆华;张苹. 电脑测色配色系统的应用探讨[J]. 纺织学报, 2004, 25(06): 112 -113 .
[9] 方鸿亨. 钢丝圈瓦楞形截面形状的探讨[J]. 纺织学报, 1981, 2(06): 19 -66 .
[10] 李强;过玉清;纪峰. 基于仰视投影的织物悬垂性测试方法[J]. 纺织学报, 2008, 29(3): 34 -37 .