纺织学报 ›› 2015, Vol. 36 ›› Issue (11): 1-5.

• 纤维材料 •    下一篇

天然彩色棉纤维在1-丁基-3-甲基咪唑氯盐离子液体中的溶胀与溶解

  

  • 收稿日期:2014-11-13 修回日期:2015-03-30 出版日期:2015-11-15 发布日期:2015-11-10

Swelling and dissolution of naturally colored cotton in ionic liquids

  • Received:2014-11-13 Revised:2015-03-30 Online:2015-11-15 Published:2015-11-10

摘要:

为避免使用非生态染料和助剂对人体造成伤害,利用热台偏光显微镜研究天然彩色棉纤维在[BMIM]Cl(1-丁基-3-甲基咪唑氯盐)离子液体中的溶胀与溶解性能。比较不同预处理方式、温度和时间对纤维溶胀和溶解性能的影响。结果发现天然彩色棉纤维在[BMIM]Cl溶剂中均产生横向的不匀性溶胀继而溶解,但溶解性能存在差异。棕棉和绿棉纤维比白棉纤维更易溶解。碱处理和酶处理提高了纤维溶胀速率和溶胀尺寸,酶处理后纤维在[BMIM]Cl溶液中变为均匀溶胀。棕棉在溶解过程中色素物质分布相对稳定,绿棉纤维色素物质随纤维溶解而向外扩散。温度对棉纤维的溶胀有很大影响。随着温度升高,棉纤维的溶胀度增大,达到最大的溶胀尺寸时间缩短。

Abstract:

In order to avoid the harmful influence on human health by nonecological dyes and additives, the swelling and dissolution behavior of naturally colored cotton in [BMIM]Cl (1-butyl-3-methylimidazolium chloride) were investigated by optical methods. The effects of reaction temperature, reaction time, and pretreatment were studied. The results showed that brown cotton, green cotton and white cotton all balloon swollen followed by completely dissolving in [BMIM]Cl ionic liquids, but their solubility was different. The pigment substance of green cotton spread out from the fiber lumen during the balloon swelling and dissolution while the pigment of brown cotton did not. Both the alkaline and enzymatic pretreatment can increase the swelling ratio of the fiber. But the ballooning phenomenon of cotton fiber disappeared after the enzymatic pretreatment. The time required to reach maximum swelling decreased and the fiber diameter at maximum swelling increased with the increasing of ionic liquid temperature.

中图分类号: 

  • TS 190.2
[1] 韩超 黄芙珍 李舟 朱振瓯 顾学峰 沈燕. 基于固相萃取-液相色谱-串联质谱法的纺织品中三氯生和三氯卡班的测定[J]. 纺织学报, 2014, 35(4): 71-0.
[2] 王金玉 黄小华 李林. 稳定的高浓度K型液体活性染料的制备[J]. 纺织学报, 2013, 34(12): 71-0.
[3] 戚益 安冬 徐倩倩 钟毅 杜鹃 罗艳. 茜素硝化对涤纶织物染色性能的影响[J]. 纺织学报, 2012, 33(10): 103-106.
[4] 王宗乾, 李长龙, 杨青. 异构十三醇聚氧乙烯醚磷酸酯的制备及表征[J]. 纺织学报, 2012, 33(3): 58-62.
[5] 李志刚. 液相色谱二极管阵列荧光法测定羊绒制品中的3种酚类激素[J]. 纺织学报, 2011, 32(11): 90-95.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王春敏. 机织复合材料弹性模量极值分析法[J]. 纺织学报, 2004, 25(03): 44 -47 .
[2] 徐继红;张文斌. 量身定制制服最优裁剪方案的理论研究[J]. 纺织学报, 2005, 26(5): 80 -82 .
[3] 朱军. 聚丙烯腈预氧化纤维阻燃产品加工技术[J]. 纺织学报, 2006, 27(5): 59 -62 .
[4] 董永春;黄继东. 酸性染料染色废水的脱色及其回用[J]. 纺织学报, 2003, 24(05): 65 -67 .
[5] 王希岳;冯青仪;邵伟国;邹雪良. 改性涤纶/涤纶仿绉交织物的碱处理特性[J]. 纺织学报, 1991, 12(11): 4 -7 .
[6] 蒋国华. 混纺比与涤/麻混纺纱性能关系探讨[J]. 纺织学报, 2002, 23(02): 41 -42 .
[7] 陆爱华. 纺织先进制造业信息化之探讨[J]. 纺织学报, 2004, 25(03): 123 -125 .
[8] 赵放. 粗纱细节产生原因及防细节控制原理[J]. 纺织学报, 1987, 8(02): 41 -44 .
[9] 吴从通. 加快棉花流通体制的改革[J]. 纺织学报, 1998, 19(06): 56 -59 .
[10] 孙建江;金良顺. CGE289-5/2PLM型双针床提花毛圈经编机的结构特点和工艺应用[J]. 纺织学报, 1994, 15(06): 25 -28 .