纺织学报 ›› 2015, Vol. 36 ›› Issue (11): 132-137.

• 管理与信息化 • 上一篇    下一篇

剪线贾卡经编织物的提花设计模型

  

  • 收稿日期:2014-11-13 修回日期:2015-05-27 出版日期:2015-11-15 发布日期:2015-11-10

Jacquard design model of warp-knitted yarn-cutting jacquard fabric

  • Received:2014-11-13 Revised:2015-05-27 Online:2015-11-15 Published:2015-11-10

摘要:

为增强剪线贾卡经编工艺的提花能力,实现剪线贾卡经编织物的计算机辅助快速设计,在深入分析满机号衬纬型贾卡和半机号压纱型贾卡的提花原理以及单纱选择装置工作原理的基础上,利用数学矩阵的方法,建立剪线贾卡经编织物的意匠格模型和提花设计模型;通过探讨半机号压纱贾卡导纱针纱线退出编织、进入编织和形成缺垫浮线等特殊工艺,建立花型意匠和剪线意匠两种设计模式,方便自由切换;以具体的工艺设计为例,介绍基于所建模型的剪线贾卡经编织物计算机辅助设计方法,通过样布试织验证模型的正确性,实现剪线贾卡提花织物快速、高效地设计。

Abstract:

To strengthen warp-knitted yarn-cutting jacquard pattern design and make its computer-aided design more efficient, this paper presents a mathematical model for jacquard design with matrix method after studying working principles of inlay jacquard bar, half-gauge fall-plate jacquard bar as well as single-end selection mechanism. As the yarn-cutting jacquard fabric technique has some specific aspects which distinguish this technique from others, two design modes, both pattern design and yarn-cutting design, are created based on the mathematical model to see information of pattern, needle selection and jacquard at the same time. Taking one yarn-cutting jacquard fabric design for an example, the paper shows how easy it is to design pattern with computer software. By means of the example, computer-aided design of warp-knitted yarn-cutting jacquard fabric according to the mathematical model has been proved more efficient and simplified.

No related articles found!
Viewed
Full text
281
HTML PDF
Just accepted Online first Issue Just accepted Online first Issue
0 0 0 0 0 281

  From Others local
  Times 113 168
  Rate 40% 60%

Abstract
371
Just accepted Online first Issue
0 0 371
  From Others local
  Times 306 65
  Rate 82% 18%

Cited

Web of Science  Crossref   ScienceDirect  Search for Citations in Google Scholar >>
 
This page requires you have already subscribed to WoS.
  Shared   
  Discussed   
[1] 刘晓霞;王振永;徐卫林. 棕叶纤维的开发研究初探[J]. 纺织学报, 2004, 25(03): 74 -75 .
[2] 李玉红;潘如如;高卫东;刘基宏;柴志雷. 基于数字图像处理的拼毛比例分析[J]. 纺织学报, 2010, 31(11): 20 -24 .
[3] 冯美玲. 论涂层加工技术及产品开发[J]. 纺织学报, 1991, 12(04): 47 -48 .
[4] 纪惠军;范雪荣;王强;余娟. 纳米级浆料添加剂在经纱上浆中的作用机制[J]. 纺织学报, 2007, 28(3): 52 -56 .
[5] 周罗庆. 双面纬编圆机上剖绒产品的开发[J]. 纺织学报, 1998, 19(05): 57 -58 .
[6] 于正书;邓永恭. 摩擦纺纱中摩擦辊径向跳动对纺纱的影响[J]. 纺织学报, 1989, 10(06): 15 -17 .
[7] 郑景略. 印染废水的治理及其全面规划的制定[J]. 纺织学报, 1983, 4(09): 60 -64 .
[8] 蒋国华. 苎麻与细旦腈纶混纺针织纱的纺纱探讨[J]. 纺织学报, 2002, 23(03): 28 -29 .
[9] 刘长植;肖国兰;李维乡. 提高成纱条干水平的措施[J]. 纺织学报, 1986, 7(06): 39 .
[10] 李维贤;铁兰叶;师严明;赵耀明;李淳. 皱纹整理对真丝织物穿着舒适性的影响(二)[J]. 纺织学报, 2002, 23(06): 28 -29 .