天线罩材料的研究进展

纺织学报 ›› 2016, Vol. 37 ›› Issue (12): 153-159.

天线罩材料的研究进展

收稿日期:2015-11-06 修回日期:2016-04-04 出版日期:2016-12-15 发布日期:2016-12-21

Research progress in radome material

Received:2015-11-06 Revised:2016-04-04 Online:2016-12-15 Published:2016-12-21

摘要/Abstract

摘要：

天线罩要在复杂的外部环境下保证飞行器中天线和雷达的正常工作，不仅要满足气动外形和透波性能的要求，还要承受气动载荷的作用。为此，综述了国内外天线罩的发展，对天线罩在设计与制备中的部分问题进行了评述与分析。介绍了天线罩的设计和材料选择原则，分析了当今常用材料体系的优劣并对天线罩材料体系的研究进展进行了归纳。重点介绍了树脂基纤维增强天线罩和高温陶瓷导弹天线罩的主要材料体系，并对各种体系天线罩材料的特点及国内外研究现状进行了评述。研究表明开展低成本高性能的复合材料，尤其是三维空间纤维增强复合材料天线罩的研究是天线罩材料今后的发展方向。

关键词: 天线罩, 介电性能, 复合材料, 性能评估

Abstract:

The radome must ensure the antenna and the radar work normally in serious external environment. It plays an important part in the flight of the missile. It must withstand the aero dynamical loads and meet the electric and aero dynamical requirement as well. This paper summarizes the development of the radome at home and abroad. The part problem of the radome in design and manufacture was discussed and analyzed. The design and material selection principles of the radome were introduced. The advantages and disadvantages of existion common material system are analyzed, and the research progress of the radome material system has been summarized. The present paper introduces main material systems of resin based fiber reinforced radome and high temperature ceramic radome, reviews the characteristics of different ceramic radome materials and investigates the progress. Finally, the further research directions of radome materials were prospected．

Key words: radome, dielectric property, composite material, performance evaluation

裴晓园陈利李嘉禄丁刚吴宁 . 天线罩材料的研究进展[J]. 纺织学报, 2016, 37(12): 153-159.

参考文献

相关文章 15

[1]	万振凯李鹏贾敏瑞包玮琛裘旭光. 智能复合材料中碳纳米管纱线参数设计及其变化特征[J]. 纺织学报, 2018, 39(06): 58-63.
[2]	贾树生万振凯杨连贺张恒杰. 碳纳米线的拉伸应变传感特性[J]. 纺织学报, 2018, 39(03): 14-18.
[3]	孙颖刘俊岭郑园园陈利李嘉禄. 碳/芳纶混编三维编织复合材料拉伸性能[J]. 纺织学报, 2018, 39(02): 49-54.
[4]	高哲蒋高明. 多轴向经编曲面复合材料汽车门低速碰撞数值模拟[J]. 纺织学报, 2018, 39(02): 43-48.
[5]	黄婕妤吕鹏飞姚壹鑫魏取福. 细菌纤维素/涤纶非织造布自编织复合材料的制备及其性能[J]. 纺织学报, 2018, 39(02): 126-131.
[6]	李晓英马丕波聂小林蒋高明. 曲面三维横编间隔织物复合材料的压缩性能[J]. 纺织学报, 2018, 39(01): 62-65.
[7]	贾树生杨连贺白会肖万振凯 . 嵌入三维编织复合材料的碳纳米线应变传感特性[J]. 纺织学报, 2018, 39(01): 11-18.
[8]	耿奕蒋金华陈南梁. 经编四轴向玻璃纤维织物的渗透行为和渗透率[J]. 纺织学报, 2017, 38(10): 49-56.
[9]	周其洪李青青陈革. 变径变纬密管状织物的控制模型及其算法实现[J]. 纺织学报, 2017, 38(10): 113-117.
[10]	高雄胡侨乐马颜雪张琦魏毅邱夷平. 不同结构厚截面三维机织碳纤维复合材料的弯曲性能对比[J]. 纺织学报, 2017, 38(09): 66-71.
[11]	吕丽华毕吉红于翔钱永芳赵玉萍. 废弃涤纶织物/氯化聚乙烯复合材料的隔声性能[J]. 纺织学报, 2017, 38(08): 50-54.
[12]	万振凯张志刚贾敏瑞包玮琛董卿霞. 基于碳纳米线传感器的三维六向编织复合材料内部损伤定位[J]. 纺织学报, 2017, 38(08): 68-74.
[13]	马倩王可金利民. 三维角联锁机织复合材料的冲击破坏有限元模拟分析[J]. 纺织学报, 2017, 38(07): 63-68.
[14]	应志平吴震宇汪茂林周香琴胡旭东. 基于气缸的三维机织增强体织造系统设计[J]. 纺织学报, 2017, 38(06): 124-129.
[15]	万振凯贡丽英万莉. 基于损伤指数的三维编织复合材料结构损伤评估[J]. 纺织学报, 2017, 38(05): 69-74.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed