正则角联锁组织的矩阵模型及其生成算法

doi:10.13475/j.fzxb.20180104706

纺织学报 ›› 2019, Vol. 40 ›› Issue (05): 47-52.doi: 10.13475/j.fzxb.20180104706

正则角联锁组织的矩阵模型及其生成算法

王旭¹^,²(), 杜增锋¹, 倪庆清³, 刘新华¹^,²

1.安徽工程大学纺织服装学院, 安徽芜湖 241000
2.安徽工程大学纺织科技公共服务平台,安徽芜湖 241000
3.信州大学纤维学部, 日本长野 3868567

收稿日期:2018-01-19 修回日期:2019-01-30 出版日期:2019-05-15 发布日期:2019-05-21
作者简介:王旭(1973—),男,副教授,博士。主要研究方向为纺织CAD。E-mail: wangxu_ahpu@hotmail.com。
基金资助:
安徽省高校优秀青年骨干人才国内外访学研修资助项目(gxfx2017045);安徽工程大学国家自然科学基金预研项目(2015yy02);安徽工程大学科研启动基金项目(2012YQQ008)

Matrix model and generation algorithm of regular angle-interlock weave

WANG Xu¹^,²(), DU Zengfeng¹, NI Qingqing³, LIU Xinhua¹^,²

1. College of Textile and Clothing, Anhui Polytechnic University, Wuhu, Anhui 241000, China
2. Science and Technology Public Service Platform for Textile Industry, Anhui Polytechnic University,Wuhu, Anhui 241000, China
3. Faculty of Textile Science and Technology, Shinshu University,Nagano 3868567, Japan

Received:2018-01-19 Revised:2019-01-30 Online:2019-05-15 Published:2019-05-21

摘要/Abstract

摘要：

为提高正则角联锁组织的设计效率,分析了无衬经纱和有衬经纱正则角联锁组织交织规律,研究了织物参数和交织规律的关系,分别建立了无衬经纱和有衬经纱正则贯穿角联锁组织矩阵模型及其生成算法,给出无衬经纱正则贯穿角联锁组织矩阵中第1接结经纱列向量的赋值算法,以及有衬经纱正则贯穿角联锁组织矩阵中衬经纱矩阵列向量的赋值算法,并对矩阵生成算法进行了验证。结果表明,通过输入纬纱层数即可根据上述算法产生对应的组织矩阵,说明提出的矩阵模型及其生成算法能快速设计出正则角联锁组织矩阵,提高该类组织的设计效率。

关键词: 角联锁组织, 交织规律, 组织矩阵, 生成算法

Abstract:

In order to improve design efficiency of angle-interlock, the interlacing rule of angle-interlock weave without filling and with filling warp yarns were analyzed, and the relationship between weave parameters and interlacing rule was established. The matrix model of angle-interlock weave and generation algorithm were built. The element relationship between column vectors of matrix model on no filling warp yarns and its generation algorithm were established. Then an algorithm for generating regular angle-interlock with filling warp yarns was established by matrix embedding method. The results show that the relative matrix can be generated by inputting weft layers with the algorithm. The regular angle-interlock weave can be produced rapidly, and the design efficiency can be improved by presented matrix model and its generation algorithm.

Key words: angle-interlock weave, interlacing rule, weave matrix, generation algorithm

中图分类号:

TS105.11

王旭, 杜增锋, 倪庆清, 刘新华. 正则角联锁组织的矩阵模型及其生成算法[J]. 纺织学报, 2019, 40(05): 47-52.

WANG Xu, DU Zengfeng, NI Qingqing, LIU Xinhua. Matrix model and generation algorithm of regular angle-interlock weave[J]. Journal of Textile Research, 2019, 40(05): 47-52.

图/表 3

图1

图2

图3

参考文献 10

[1]	马倩, 王可, 金利民. 三维角联锁机织复合材料的冲击破坏有限元模拟分析[J]. 纺织学报, 2017,38(7):63-68.
	MA Qian, WANG Ke, JIN Limin. Modeling analysis on impact damage of 3-D angle-interlock woven composite based on finite element[J]. Journal of Textile Research, 2017,38(7):63-68. doi: 10.1177/004051756803800108
[2]	冯古雨, 曹海建, 王新月, 等. 三维角联锁机织复合材料经纬向剪切性能有限元分析[J]. 材料科学与工程学报, 2017,35(4):650-654.
	FENG Guyu, CAO Haijian, WANG Xinyue, et al. Finite element analysis on shear property in warp and weft direction of 3D angle interlock composites[J]. Journal of Material Science & Engineering, 2017,35(4):650-654.
[3]	CHEN Xiaogang, TAYLOR Lindsay Waterton, TSAI Li Ju. An overview on fabrication of three-dimensional woven textile preforms for composites[J]. Textile Research Journal, 2011,81(9):932-944. doi: 10.1177/0040517510392471
[4]	杨小侠. 角联锁结构三维织物的设计[J]. 棉纺织技术, 2011,39(9):4-7.
	YANG Xiaoxia. Design of angle-interlock structure three dimensional fabric[J]. Cotton Textile Technology, 2011,39(9):4-7.
[5]	许鹤, 唐予远, 马菲, 等. 角联锁结构中经纬纱排列的数字表达及其规律[J]. 纺织学报, 2015,36(10):29-32.
	XU He, TANG Yuyuan, MA Fei, et al. Digital expression and regularity of warp and weft repeat in angle-interlock structure[J]. Journal of Textile Research, 2015,36(10):29-32.
[6]	聂建斌, 卢士艳. 角联锁织物的组织设计[J]. 纺织学报, 2006,27(3):90-91.
	NIE Jianbin, LU Shiyan. Construction of angle-interlock woven fabrics[J]. Journal of Textile Research, 2006,27(3):90-91.
[7]	白燕. 正则多重纬角联锁机织物的快速设计[J]. 纺织学报, 2013,34(2):61-64.
	BAI Yan. Rapid design of regular multiple weft angle interlocking fabric[J]. Journal of Textile Research, 2013,34(2):61-64.
[8]	许璀莹, 顾冬娟, 张玲妹, 等. 实口结构重纬角联锁织物组织图计算机辅助绘制[J].丝绸, 2010(8):45-46.
	XU Cuiying, GU Dongjuan, ZHANG Lingmei, et. al. Drawing of the weave diagram of multi-weft angle-interlock fabric aided with computer[J]. Journal of Silk, 2010(8):45-46.
[9]	CHEN Xiaogang, POTIYARAJ P. CAD/CAM of orthogonal and angle-interlock woven structures for industrial applications[J]. Textile Research Journal, 1999,69(9):648-655.
[10]	CHEN Xiaogang, KNOX R T, MCKENNA D F, et al. Automatic generation of weaves for the CAM of 2D and 3D woven textile structures[J]. The Journal of The Textile Institute, 1996,87(2):356-370.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

正则角联锁组织的矩阵模型及其生成算法

Matrix model and generation algorithm of regular angle-interlock weave

RichHTML

PDF (PC)

摘要/Abstract

引用本文

使用本文

图/表 3

参考文献 10

相关文章 7

Metrics

本文评价

推荐阅读 0

[1]	王旭, 杜增锋, 王翠娥, 倪庆清, 刘新华. 贯穿正交机织物结构的参数化三维建模[J]. 纺织学报, 2019, 40(11): 57-63.
[2]	骆晓蕾敖利民王欢欢吕小娇熊梦依汪宴梅. 织物组织的数字化表达及信息织物设计[J]. 纺织学报, 2015, 36(04): 44-49.
[3]	谢宝珠;张聿;金耀;杨婷婷. 基于组织矩阵移位迭代方法的织物组织设计[J]. 纺织学报, 2010, 31(6): 37-42.
[4]	袁惠芬;王旭. 基于特征子阵匹配的织物组织分析[J]. 纺织学报, 2009, 30(9): 45-48.
[5]	袁惠芬;王旭. 基于MatLab的管状织物组织设计[J]. 纺织学报, 2008, 29(12): 34-38.
[6]	施国生;梁道雷. 多臂织物组织矩阵的自动设计[J]. 纺织学报, 2002, 23(06): 60-60.
[7]	施国生;沈干;胡觉亮. 多臂织物大组织矩阵的设计方法[J]. 纺织学报, 2000, 21(06): 30-31.