纺织学报 ›› 2023, Vol. 44 ›› Issue (12): 242-250.doi: 10.13475/j.fzxb.20220808502

• 综合述评 • 上一篇    下一篇

基于压力测评的帽子工效性能研究进展

王中昱1, 王云仪1,2(), 王诗潭1,3   

  1. 1.东华大学 服装与艺术设计学院, 上海 200051
    2.现代服装设计与技术教育部重点实验室(东华大学),上海 200051
    3.同济大学 上海市养志康复医院(上海市阳光康复中心), 上海 201619
  • 收稿日期:2022-12-17 修回日期:2023-05-12 出版日期:2023-12-15 发布日期:2024-01-22
  • 通讯作者: 王云仪(1972—),女,教授,博士。主要研究方向为功能服装设计与性能评价。E-mail: wangyunyi@dhu.edu.cn。
  • 作者简介:王中昱(1995—),女,博士生。主要研究方向为服装舒适性与功能服装。
  • 基金资助:
    中央高校基本科研业务费专项基金资助项目(2232022G-08);上海市科学技术委员会“科技创新行动计划”“一带一路”国际合作项目(21130750100)

Research progress in ergonomic performance of caps based on pressure measurement

WANG Zhongyu1, WANG Yunyi1,2(), WANG Shitan1,3   

  1. 1. College of Fashion and Design, Donghua University, Shanghai 200051, China
    2. Key Laboratory of Clothing Design and Technology, Ministry of Education, Donghua University, Shanghai 200051, China
    3. Yangzhi Rehabilitation Hospital(Shanghai Sunshine Rehabilitation Center), Tongji University, Shanghai 201619, China
  • Received:2022-12-17 Revised:2023-05-12 Published:2023-12-15 Online:2024-01-22

RichHTML

21

PDF (PC)

66

摘要：

头与帽子之间界面压力是影响佩戴舒适性的关键因素。为推动帽类产品的工效性能研究,提升佩戴体验,在阐述头与帽子之间界面压力传递机制的基础上,总结帽子及其它头部相关产品界面压力的表征方法。综述了有关头与帽子之间界面压力的相关工效性能,包括压力舒适性、佩戴稳定性、帽身合体度以及热湿舒适性。认为对帽子工效性能的研究尚未形成体系,尤其在动态压力表征、计算机模拟方面的研究尚处于空白。在分析现有研究的基础上提出未来研究的方向:继续完善头部压力测评体系、探索动态压力测评方法、挖掘压力作用机制及其影响机制、开展虚拟适配研究、解析压力与热湿舒适的交互作用规律,建立完善的帽子压力测评与工效性能评估体系。

关键词: 帽子, 界面压力, 佩戴舒适性, 工效性能, 头部压力测评

Abstract:

Significance Caps are common head accessories in people's daily life. In practical use, ergonomic function of caps relies on its stable attachment to the head causing the pressure from the cap to the head. The pressure at 'head-cap' interface are the key factors affecting the comfort of caps while wearing. Through analysis of 'head-cap' interface pressure mechanism, this article reviews the current research of cap pressure measurement methods and characterization indicators, as well as the research progress based on these evaluation technologies. In order to summarize characteristics and applicability of different measurement methods and provide effective suggestions for 'head-cap' interface pressure study, this paper offers a theoretical basis for the optimization design of cap products aiming at improving fit, pressure comfort, wearing stability as well as thermal and moisture comfort.
Progress In current studies, pressure measurement of specific test points on the head is the most commonly used method, performing by human subjects or head mannequins, with different data collection methods. Head pressure distribution under caps could also be measured by subjects' trial experiments and head mannequins, characterized by pressure maps, and researchers have developed corresponding testing devices, such as pressure sensing pads, silicone pressure sensing caps and pressure testing head manikins. The gap between the ″head-cap″ interface could provide the morphology relationship between them, indirectly evaluating the cap pressure by measuring the difference of size or spatial morphology of the interface. Researchers also monitored physiological signals' change under the degree of compression, however, the skin blood flow, surface electromyogram, electroencephalogram signals tend to be interfered the hair or electrode, meanwhile, whether characterizing ″head-cap″ pressure by infrared camera is feasible remains to be verified. In the study of pressure related ergonomic performance of caps, pressure and comfort sensations were frequently used as characterization indexes in the study of pressure comfort, with perceptions of pressure varying among people and head regions. The wearing stability of caps was often evaluated by holding power, as researchers used critical load and critical wind speed to characterize the holding power of the caps under external forces. The fitness of caps directly affects the pressure on the ″head-cap″ interface, which is based on morphology of human head. At present, normalized head and face sizes have been specified in certain standards, and head statistical databases and interaction design platforms were set up for product development for the head.
Conclusion and Prospect Based on existing research, it is pointed out that the research on ergonomics of caps has not yet been systematically established. In order to improve the ergonomics and wearing experience of caps, further research orientations are put forward. Firstly, head mannequins with hard material and statistical middle sizes are used in pressure measurement, and the evaluation indexes are single and unrepresentativeness. Following research could focus on developing a series of biomimetic head manikins while considering the influence of hair. The evaluation index should be built characteristic of interface pressure, from the perspective of multi-index comprehensive evaluation. Secondly, for dynamic situations, the accuracy and repeatability of the existing measurement devices and indicators need to be improved. In the future, dynamic pressure measurement methods should be expanded, so as to explore the influence law of the objective pressure distribution on the dynamic stability. Thirdly, formation mechanism of cap pressure and its influence on head perception has yet to be systematically studied, which remains necessary to be further investigated combined with anatomy and physiological knowledge, with the relationship between pressure distribution and subjective comfort be explored, and the potential correlation between subjective evaluation indicators deeply analyzed. Furthermore, as fitness is the key to the study of the caps' ergonomic properties, it is not enough to characterize only through the ″head-cap″ interface. Further research could adapt virtual technologies and numerical simulation to study the interaction impact of caps' structure and materials based on parametric structure design and mechanical properties of materials. Last, the ″head-cap″ interface pressure may affect the head thermal and moisture comfort, but the exploration of mechanism research is still in its infancy. The relationship between head pressure and thermal comfort will be a complex but worthy topic.

Key words: cap, interface pressure, pressure on head, wearing comfort, ergonomic performance

中图分类号: 

  • TS941.16

表1

头与帽子间界面压力客观测评方法及其优缺点"

名称 测试仪器 表征指标 优势 局限性
压力值测量 水银压强计,电阻式、电容式、气囊式、压力传感器,织物基传感器 压力值、压力平均值、压力峰值 直观地获取关键部位的压力值 测试点较为分散、独立,所得结果不利于开展机制研究,头部毛发不利于传感器的固定
压力分布测量 压力传感器、压力传感垫、压力传感硅胶帽、压力测试头模等 压力平均值与标准差、压力分布图色相 可获取空间各部位的压力变化情况,有利于全面解释头与帽子间界面压力形成机制及其作用规律 测试仪器通常仅适用于一种头型,难以兼顾不同头型的研究需求
头与帽子间间隙
测评		 软尺、三维扫描仪、
逆向建模软件		 头帽围差,平均最小距离(SOD)与间隙均匀度(GU) 揭示了头部与产品的形态匹配关系,无需在头部固定传感器 结合材料力学特性间接获得界面压力,仅适用于保形性强或材质较硬的产品
生理指标测评 生理多导仪的电极帽、红外摄像机等 皮肤血流量、表面肌电、脑电信号、表面温度等 直接体现界面压力对人体受压部位的生理反应的影响 仅能从侧面反映头部受压程度,无法直接推断压力大小,可靠性较差
[1] JUN Y M, PARK C H, KANG T J. Effect of heat and moisture transfer properties on microclimate and subjective thermal comfort of caps[J]. Textile Research Journal, 2010, 80(20): 2195-2203.
[2] BOGERD C P, AERTS J M, ANNAHEIM S, et al. A review on ergonomics of headgear: thermal effects[J]. International Journal of Industrial Ergonomics, 2015, 45: 1-12.
[3] YOUNGMIN J, CHUNG HEE P, SHIM H, et al. Thermal comfort properties of wearing caps from various textiles[J]. Textile Research Journal, 2009, 79(2): 179-189.
[4] LI Z, DENG X, YU G, et al. A web platform targeting for easier fit performance analysis and headwear products aided design[C]// REBELO F, SOARES M. AHFE 2020:Advances in Ergonomics in Design. Cham: Springer, 2020: 51-62.
[5] ARENS E, ZHANG H, HUIZENGA C. Partial- and whole-body thermal sensation and comfort:part I: uniform environmental conditions[J]. Journal of Thermal Biology, 2006, 31(1/2): 53-59.
[6] ARENS E, ZHANG H, HUIZENGA C. Partial- and whole-body thermal sensation and comfort:part II: non-uniform environmental conditions[J]. Journal of Thermal Biology, 2006, 31(1/2): 60-66.
[7] HATCH K L. Textile science[M]. Minneapolis: West Publishing Co, 1993: 266.
[8] KAMALHA E, ZENG Y, MWASIAGI J I, et al. The comfort dimension: a review of perception in clothing[J]. Journal of Sensory Studies, 2013, 28(6): 423-444.
[9] LI Y, WONG A S W. Clothing biosensory engin-eering[M]. Cambridge: Woodhead Publishing, 2006: 151-166.
[10] SMITH J E. The comfort of clothing[J]. Textiles, 1986, 15: 23-27.
[11] YOU F, WANG J M, LUO X N, et al. Garment's pressure sensation: Ⅰ: subjective assessment and predictability for the sensation[J]. International Journal of Clothing Science and Technology, 2002, 14(5): 307-316.
[12] LI Y, DAI X Q. Biomechanical engineering of textiles and clothing[M]. Cambridge: Woodhead Publishing Limited, 2006: 145-159.
[13] CUI W Q O, ZHU Y. Field study of thermal environment spatial distribution and passenger local thermal comfort in aircraft cabin[J]. Building & Environment, 2014, 80(10): 213-220.
[14] LIU R, LAO T T, KWOK L Y, et al. Effects of graduated compression stockings with different pressure profiles on lower-limb venous structures and haemodynamics[J]. Advances in Therapy, 2008, 25: 465-478.
[15] ZHANG X, YEUNG K W, LI Y. Numerical simulation of 3D dynamic garment pressure[J]. Textile Research Journal, 2016, 72(3): 245-252.
[16] 姚薇薇. 参数化帽子结构设计及其自动生成研究[D]. 上海: 东华大学, 2011: 33-53.
YAO Weiwei. Study on parametric hat pattern design and its auto-generation[D]. Shanghai: Donghua University, 2011: 33-53.
[17] SONG X X, XU Z Y. Measurement and analysis of knitting fabric pressure[J]. Applied Mechanics and Materials, 2012, 268/270: 1637-1643.
[18] 李晓丹. 基于压力舒适性的合体布帽松量研究及其参数化设计[D]. 上海: 东华大学, 2014: 29-42.
LI Xiaodan. Research on the ease of fitted hat based on pressure comfort and parametric design[D]. Shanghai: Donghua University, 2014: 29-42.
[19] 王璐. 陕西地区老年人头型与帽子合体性研究[D]. 西安: 西安工程大学, 2015: 65-76.
WANG Lu. Elderly headform and hat fitting research in Shanxi[D]. Xi'an: Xi'an Polytecnic University, 2015: 65-76.
[20] MOORE K L, AGUR A M R, DALLEY A F. Essential clinical anatomy[M]. 4th ed. Pennsylvania: Lippincott Williams and Wilkins, 2010: 497-510.
[21] TAUBE Navaraj W, GARCIA Nunez C, SHAKTHIVEL D, et al. Nanowire FET based neural element for robotic tactile sensing skin[J]. Frontiers in Neuroscience, 2017, 11: 1-20.
[22] MANCINI F, BAULEO A, COLE J, et al. Whole-body mapping of spatial acuity for pain and touch[J]. Annals of Neurology, 2014, 75(6): 917-24.
[23] YOU F, WANG J M, LUO X N, et al. Garment's pressure sensation: Ⅱ: the psychophysical mechanism for the sensation[J]. International Journal of Clothing Science and Technology, 2002, 14(5): 317-327.
[24] LABAT K L, RYAN K S. Human body: a wearable product designer's guide[M]. Florida: CRC Press, 2019: 91-99.
[25] 刘运娟. 基于脑电技术的服装压力舒适性评价方法的基础研究[D]. 无锡: 江南大学, 2016: 8-11.
LIU Yunjuan. Basic research on clothing pressure comfort evaluation method based on EEG techno-logy[D]. Wuxi: Jiangnan University, 2016: 8-11.
[26] CHUNG H P, JUN Y, TAE J K, et al. Development of a tool to measure the pressure comfort of a cap:Ⅱ: by the analysis of correlation between objective pressure and subjective wearing sensation[J]. Textile Research Journal, 2016, 77(7): 520-527.
[27] YANG Y X, WEI X F, ZHANG N N, et al. A non-printed integrated-circuit textile for wireless therano-stics[J]. Nature Communications, 2021, 12(1): 4876.
[28] BAI L, LEHNERT B P, LIU J, et al. Genetic identification of an expansive mechanoreceptor sensitive to skin stroking[J]. Cell, 2015, 163(7): 1783-1795.
[29] KANG T J, PARK C H, JUN Y, et al. Development of a tool to evaluate the comfort of a baseball cap from objective pressure measurement:Ⅰ:holding power and pressure distribution[J]. Textile Research Journal, 2016, 77(9): 653-660.
[30] 陆明艳. 运动文胸的运动舒适性研究与设计[D]. 苏州: 苏州大学, 2015: 31-35.
LU Mingyan. Study on dynamic comfort and design of sport bras[D]. Suzhou: Soochou University, 2015: 31-35.
[31] ALEMANY S, OLASO J, NACHER B, et al. A multidimensional approach to the generation of helmets' design criteria: a preliminar study[J]. Work, 2012, 41: 4031-4037.
[32] CHEN X, ZHANG C, MA C, et al. Evaluation of helmet comfort based on flexible pressure sensor matrix[C]// KARWOWSKI W, AHRAM T. IHSI 2019: Intelligent Human Systems Integration 2019. Cham: Springer, 2019: 833-839.
[33] NIU J, ZHANG C, CHEN X, et al. A novel helmet fitness evaluation device based on the flexible pressure sensor matrix[J]. Sensors (Basel), 2019, 19(18): 3823.
[34] 程宁波, 吴志明. 服装压力舒适性的研究方法及发展趋势[J]. 丝绸, 2019, 56(3): 38-44.
CHENG Ningbo, WU Zhiming. Research method and development tendency of garment pressure[J]. Journal of Silk, 2019, 56(3):38-44.
[35] 孟祥令, 张渭源. 服装压力舒适性的研究进展[J]. 纺织学报, 2006, 27(7): 109-112.
MENG Xiangling, ZHANG Weiyuan. Progress of study on pressure comfort of clothing[J], Journal of Textile Research, 2006, 27(7): 109-112.
[36] 李新阳. 保健压力袜工艺与压力分布的研究[D]. 杭州: 浙江理工大学, 2014: 37-51.
LI Xinyang. Research on the process and pressure distribution of compression stockings[D]. Hangzhou: Zhejiang Sci-Tech University, 2014: 37-51.
[37] PANG T Y, LO T S T, ELLENA T, et al. Fit, stability and comfort assessment of custom-fitted bicycle helmet inner liner designs, based on 3d anthropometric data[J]. Applied Ergonomics, 2018, 68: 240-248.
[38] ELLENA T, SUBIC A, MUSTAFA H, et al. The helmet fit index: an intelligent tool for fit assessment and design customisation[J]. Applied Ergonomics, 2016, 55: 194-207.
[39] ELLENA T, SUBIC A, PANG T Y, et al. The helmet fit index: a method for the computational analysis of fit between human head shapes and bicycle helmets[C]// DINIZ S, BARBOSA J. 2nd International Congress on Sports Sciences Research and Technology Support. Rome: Springer, 2014: 145-153.
[40] SKALS S, ELLENA T, SUBIC A, et al. Improving fit of bicycle helmet liners using 3D anthropometric data[J]. International Journal of Industrial Ergonomics, 2016, 55: 86-95.
[41] LACKO D, HUYSMANS T, VLEUGELS J, et al. Product sizing with 3D anthropometry and k-medoids clustering[J]. Computer-Aided Design, 2017, 91: 60-74.
[42] PARK B D, CORNER B D, HUDSON J A, et al. A three-dimensional parametric adult head model with representation of scalp shape variability under hair[J]. Applied Ergonomics, 2021, 90: 103239.
[43] 王奥雪. A公司塑身内衣对皮肤血流的影响与塑形效果研究[D]. 西安: 西安工程大学, 2018: 23-45.
WANG Aoxue. Research on the influence of a company's body-shaping underwear on skin blood flow and the shaping effect[D]. Xi'an: Xi'an Polytecnic University, 2018: 23-45.
[44] 程宁波. 基于表面肌电信号的骑行裤压力舒适性研究[D]. 无锡: 江南大学, 2019: 19-46.
CHENG Ningbo. Research on pressure comfort of cycling pants based on sEMG signal[D]. Wuxi: Jiangnan University, 2019: 19-46.
[45] SILINA L, DABOLINA I, LAPKOVSKA E, et al. Sensor matrix for evaluation of clothing fit[C]// 2019 IEEE 60th International Scientific Conference on Power and Electrical Engineering of Riga Technical Univer-sity (RTUCON). Riga: IEEE. 2019:1-4.
[46] 王永荣, 罗胜利, 廖银琳, 等. 女性服装压力舒适阈限的测试与研究[J]. 纺织学报, 2018, 39(3): 132-136.
WANG Yongrong, LUO Shengli, LIAO Yinlin, et al. Test and study of pressure comfort threshold of female's garment[J]. Journal of Textile Research, 2018, 39(3): 132-136.
[47] HOBSON J A. States of brain and mind[M]. New York: Springer, 1988: 89-91.
[48] SHAH P, LUXIMON Y. Assessment of pressure sensitivity in the head region for Chinese adults[J]. Applied Ergonomics, 2021. DOI:10.1016/j.apergo.2021.103548.
[49] BROEKHUIZEN R, DE RYDT T, LUTTERS E, et al. Head sensitivity for designing bicycle helmets with improved physical comfort[C]// REBELO F, SOARES M M. Advances in Intelligent Systems and Computing. Cham: Springer, 2019: 14-19.
[50] 孙庆林, 马洪顺, 董心. 人颅骨弹性模量与泊松系数测定试验研究[J]. 试验技术与试验机, 1998, 38(2): 94-95.
SUN Qinglin, MA Hongshun, DONG Xin. Experimental study on determination of elastic modulus and Poisson coefficient of human skull[J]. Engineering & Test, 1998, 38(2): 94-95.
[51] 徐莹, 赵鑫, 张露丹, 等. 飞行员头盔的压力舒适性研究[J]. 航天医学与医学工程, 2018, 31(4): 452-457.
XU Ying, ZHAO Xin, ZHANG Ludan, et al. Research on pressure comfort of pilot's helmet[J]. Space Medicine & Medical Engineering, 2018, 31(4): 452-457.
[52] NAGAMATSU R N, ABREU M J, SANTIAGO C D, et al. Determination of total comfort of sport caps using wear trials[C]// TAKESHI K. The Fiber Society 2018 Spring Conference. Tokyo: The Fiber Society, 2018: 181-183
[53] JELLEMA A, GALLOUIN E, MASSÉ B, et al. 3D anthropometry in ergonomic product design educa-tion[C]// BOHEMIA E, KOVACEVIC A, BUCK L, et al. Proceedings of the 21st International Conference on Engineering and Product Design Education: Towards a New Innovation Landscape. Glasgow: The Design Society, 2019.DOI:10.35199/epde2019.2.
[54] ROBINETTE K M, DAANEN H, PAQUET E. The CAESAR project: a 3-D surface anthropometry survey[C]// WERNER B. Second International Conference on 3-D Digital Imaging and Modeling. Ottawa: IEEE, 1999: 380-386.
[55] 董芳华, 陈晓, 周宏. 基于CT的男军人三维头面型DMS应用[J]. 计算机工程, 2005, 31(12): 214-220.
DONG Fanghua, CHEN Xiao, ZHOU Hong. Application of male soldiers' 3D head forms DMS based on CT[J]. Computer Engineering, 2005, 31(12): 214-220.
[56] YAN L B R M, CHOW E. A design and evaluation tool using 3D head templates[J]. Computer Aided Design and Applications, 2016, 13(2): 153-161.
[57] WANG H, YANG W, YU Y, et al. 3D digital anthropometric study on Chinese head and face[C]// D'APUZZO N. Proceedings of 3DBODY.TECH 2018 - 9th International Conference and Exhibition on 3D Body Scanning and Processing Technologies. Lugano: Hometrica Consulting, 2018: 287-295.
[58] 邵玉光. 基于三维头型及穴位分布的头戴产品辅助设计平台研究[D]. 广州: 华南理工大学, 2020: 34-53.
SHAO Yuguang. Research on aided design platform for head-mounted products based on three-dimentional head shape and acupoint distribution[D]. Guangzhou: South China University of Technology, 2020: 34-53.
[59] 李哲林, 张泽苑, 王晶晶, 等. 头戴产品人因设计与测评研究综述[J]. 包装工程, 2021, 42(16): 49-60.
LI Zhelin, ZHANG Zeyuan, WANG Jingjing, et al. Review on human factor design and evaluation of head-mounted products[J]. Packaging Engineering, 2021, 42(16): 49-60.
[60] TANAKA S, MIDORIKAWA T, TOKURA H. Effects of pressure exerted on the skin by elastic cord on the core temperature, body weight loss and salivary secretion rate at 35 ℃[J]. European Journal of Applied Physiology, 2006, 96(4): 471-476.
[61] TADAKI E, KUMAZAWA T, MIZUMURA K, et al. Hemihidrosis due to skin pressure with particular remarks on the intensity and area of the pressure sti-muli[J]. Japanese Journal of Physiology, 1981, 31(2): 259-267.
[62] TOKURA H, KOMATSU Y, TAMURA N. Effects of skin pressure applied by clothing upon sweating rates in sedentary women[J]. Journal of Home Economics of Japan, 1983, 34(10): 25-29.
[63] OGAWA T, ASAYAMA M, ITO M, et al. Significance of skin pressure in body heat balance[J]. Japanese Journal of Physiology, 1979, 29(6): 805-816.
[64] LEE Y, HYUN K, TOKURA H. The effects of skin pressure by clothing on circadian rhythms of core temperature and salivary melatonin[J]. Chronobiology International, 2000, 17(6): 783-793.
[1] 艾尔西丁?若孜 单小红 夏克尔?赛塔尔 刘金莲. 新疆维吾尔族传统帽子的结构分析[J]. 纺织学报, 2015, 36(06): 112-118.
[2] 何佳臻 李俊. 防护服工效性能评价方法研究进展[J]. 纺织学报, 2014, 35(1): 158-0.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号　 京公网安备11010502044800号
版权所有 © 2021 《纺织学报》编辑部
地址： 北京市朝阳区延静里中街3号主楼6层《纺织学报》杂志社　邮政编码：100025　
电话：010-65017711,65917740　传真：010-65016539　Email:fangzhixuebao@vip.126.com
本系统由北京玛格泰克科技发展有限公司设计开发