纺织学报 ›› 2018, Vol. 39 ›› Issue (09): 34-38.doi: 10.13475/j.fzxb.20171004006

• 纺织工程 • 上一篇    下一篇

柔性全编织摩擦纳米发电织物的制备

    

  1.  
  • 收稿日期:2017-10-13 修回日期:2018-05-26 出版日期:2018-09-15 发布日期:2018-09-12

Preparation of flexible all-braiding triboelectric nanogenerator

  • Received:2017-10-13 Revised:2018-05-26 Online:2018-09-15 Published:2018-09-12

摘要:

为使柔性摩擦纳米发电机更好地贴合人体,且方便制备,将柔性摩擦纳米发电机进行服饰化。通过锥形 编织的方法将锦纶(PA6)与涤纶(PET)缝纫线分别缠绕在镀银的金属长丝表面,形成2 种皮芯结构的复合导电纤 维绳,其中皮层PA6与PET纤维缝纫线作为摩擦层,芯层镀银金属长丝作为电极层,将2 种复合导电纤维绳经机织 制备成柔性自供能织物作为摩擦纳米发电机,收集人体运动机械能并转化为电能,进而为可穿戴设备供电;同时对 该发电织物的表面形貌和输出性能进行表征。结果表明:这种摩擦纳米发电织物的开路电压为20.0 V,短路电流 为1.50 μA,瞬时功率最大为1.6 mW/m2 ;该柔性摩擦纳米发电机由缝纫线编织而成,具有很好的柔性、透气性以及水洗性,材料廉价易得,且制备工艺简单。

关键词: 摩擦纳米发电机, 自供能, 全编织, 导电复合纤维绳, 纳米发电织物

Abstract:

In order to well fit human body with flexible all-braided triboelectric nanogenerator (FTENG) and easily prepare FTNG, the FTNG was garmented. By using cone-spinningmethod, the skin-core structured composite yarns were formed by winding nylon (PA6) and polyester (PET) sewing yarn onto the surface of Ag fiber surface, respectively. These composite yarns were woven into self-powered fabrics with a shuttle, in which PA6 cortex cortex and PET were used as friction layer and the core layer of Ag fiber was used as electrode for effective biomechanical energy harvesting and active wearable electronics. Based on the skin-core structured composite yarns and the advanced 2-D structural design, the open circuit voltage and short circuit current are 20.0V and 1.50μA, respectively, and the maximum peak power density can reach 1.6mW/m-2. In addition, the collected power is capable of charging a commercial capacitor.

Key words: triboelectric nanogenerator, self-powered, all-brading, conductive composite fiber rope, nano power generation fabric

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王金. 坯布直接起绒节约能源提高质量[J]. 纺织学报, 1982, 3(08): 60 .
[2] 苏茂尧. 用光散射法和粘度法研究纤维素在DMSO/PF溶剂系统中溶液的性质[J]. 纺织学报, 1987, 8(02): 34 -37 .
[3] 狄剑锋. 转杯纺纱接头关键技术分析[J]. 纺织学报, 2004, 25(04): 43 -44 .
[4] 徐建平. 工业经济效益的统计分析[J]. 纺织学报, 1996, 17(04): 67 -68 .
[5] 唐虹.;张渭源;黄晓梅. 机织面料吸湿快干梯度结构的构建[J]. 纺织学报, 2006, 27(8): 41 -44 .
[6] 徐继红;张文斌. 量身定制制服最优裁剪方案的理论研究[J]. 纺织学报, 2005, 26(5): 80 -82 .
[7] 沈天飞. 高产梳棉机刺辊除杂两类工艺的试验与研究[J]. 纺织学报, 1987, 8(12): 5 -10 .
[8] 卿湘运;段红;魏俊民. 基于局部熵的织物疵点检测与识别的研究[J]. 纺织学报, 2004, 25(05): 57 -58 .
[9] 朱军. 聚丙烯腈预氧化纤维阻燃产品加工技术[J]. 纺织学报, 2006, 27(5): 59 -62 .
[10] 傅旦;陈春堂. 橡毯式防缩机的预缩机理及缩率控制的探讨[J]. 纺织学报, 1989, 10(07): 21 -24 .