纺织学报 ›› 2021, Vol. 42 ›› Issue (06): 85-90.doi: 10.13475/j.fzxb.20200901406
贺雅勤1, 毕雪蓉1, 钱希茜1, 阮钧2, 郁崇文1,3()
HE Yaqin1, BI Xuerong1, QIAN Xixi1, RUAN Jun2, YU Chongwen1,3()
摘要:
牵伸时纤维运动引起其排列变化是影响牵伸后纱条条干不匀的关键。为探究纤维变速点分布对牵伸后纱条条干不匀的影响,通过计算机模拟了实际纱条中的纤维排列(实际纱条),分别对理想纱条和实际纱条牵伸过程中的纤维运动进行了模拟,计算了在不同变速点分布下牵伸后纱条的条干不匀,并进行实验验证。结果表明:与理想纱条相比,实际纱条的条干不匀模拟值更接近实测值,且实际纱条能体现牵伸中变速点分布对牵伸后纱条条干不匀的影响,即变速点分布越分散,牵伸后纱条条干不匀越大;实际棉条模拟牵伸后的条干不匀值与实测值变化趋势一致,可用来预测牵伸后纱条的条干不匀。
中图分类号:
[1] | MARTINDALE J G. A new method of measuring the irregularity of yarns with some observations on the origin of irregularities in worsted slivers and yarns[J]. Journal of the Textile Institute, 1945(36):35-47. |
[2] | RAO S J. The mathematical model for the ideal sliver and its applications to the theory of roller drafting[J]. Journal of the Textile Institute, 1961(52):570-600. |
[3] |
BROWN G H, LY G N. Statistics for the number of fiber ends in a segment of a random assembly of aligned fibers[J]. Textile Research Journal, 1985, 55 (4):206-210.
doi: 10.1177/004051758505500402 |
[4] |
ZEIDMAN M, SUH M W, BATRA S K. A new perspective on yarn unevenness: components and determinants of general unevenness[J]. Textile Research Journal, 1990, 49(1):28-34.
doi: 10.1177/004051757904900105 |
[5] | 张弘强, 胡远波, 姜展, 等. 生条中纤维左头端的分布[J]. 纺织学报, 2016, 37(5):28-31. |
ZHANG Hongqiang, HU Yuanbo, JIANG Zhan, et al. Distribution of fiber left ends in card sliver[J]. Journal of Textile Research, 2016, 37(5):28-31. | |
[6] | 严广松, 苏玉恒. 理想纱条的纤维排列与随机过程分析[J]. 河南工程学院学报(自然科学版), 2014, 26(1):1-5. |
YAN Guangsong, SU Yuheng. The alignment of fibers in ideal sliver and its analysis by stochastic process[J]. Journal of Henan Institute of Engineering (Natural Science Edition), 2014, 26(1):1-5. | |
[7] |
JIANG Zhan, HU Yuanbo, KUANG Xueqin, et al. Simulation on fiber random arrangement in the yarn[J]. The Journal of The Textile Institute, 2014.DOI:10.1080/00405000.2014.891685.
doi: 10.1080/00405000.2014.891685 |
[8] | 郁崇文. 纺纱学[M]. 中国纺织出版社, 2014:112-115. |
YU Chongwen. Spinning science[M]. Beijing: China Textile & Apparel Press, 2014:112-115. | |
[9] |
MUPFUDZE KUDAKWASHE D, CAO Qiaoli, SHEN Yuanying, et al. Fiber motion and the accelerated point distribution in roller drafting[J]. Textile Research Journal, 2019. DOI:10.1177/0040517518767150.
doi: 10.1177/0040517518767150 |
[10] |
SUN Na, JIANG Zhan, YU Chongwen. Modeling roller drafting based on fiber arrangement in the sliver[J]. The Journal of the Textile Institute, 2018. DOI:10.1080/0040500.2018.1427909.
doi: 10.1080/0040500.2018.1427909 |
[11] | 严广松, 路允芳, 郁崇文. 牵伸区浮游纤维变速点分布的理论研究[J]. 纺织学报, 2007, 28(9):23-26. |
YAN Guangsong, LU Yunfang, YU Chongwen. Theoretical study on the distribution of accelerated points of floating fibers in the drafting zone[J]. Journal of Textile Research, 2007, 28(9):23-26. | |
[12] | 丁祥, 章华军, 杨道明, 等. 精梳棉涤纶混纺套染纱的生产实践[J]. 棉纺织技术, 2020(8):59-62. |
DING Xiang, ZHANG Huajun, YANG Daoming, et al. Production practice of combed cotton polymer blended over dyeing yarn.[J]. Cotton Textile Technology, 2020(8):59-62. | |
[13] | 刘金辉, 李维周, 佘崇舰. 圣麻Coolplus混纺纱生产实践[J]. 棉纺织技术, 2008(5):40-42. |
LIU Jinhui, LI Weizhou, SHE Chongjian. Practice of producing shengma coolplus blended yarn[J]. Cotton Textile Technology, 2008(5):40-42. | |
[14] | 朱秋凉. 赛络纺棉氨纶包芯纱的生产及应用[J]. 棉纺织技术, 2007(12):34-36. |
ZHU Qiuliang. Production and application of siro spinning cotton spandex core-spun yarn.[J] Cotton Textile Technology, 2007(12):34-36. |
[1] | 王玉栋, 姬长春, 王新厚, 高晓平. 新型熔喷气流模头的设计与数值分析[J]. 纺织学报, 2021, 42(07): 95-100. |
[2] | 阮丽, 孙荣基, 刘基宏, 李永贵. 特殊外观结构赛络花式纱的后区牵伸及成纱结构分析[J]. 纺织学报, 2021, 42(03): 77-81. |
[3] | 苏玉恒, 孔繁荣, 严广松. 纱条中纤维排列状态与纱条不匀的关系[J]. 纺织学报, 2020, 41(01): 45-49. |
[4] | 李明明, 陈烨, 李夏, 王华平. 纺丝工艺对并列复合聚酯纤维性能的影响[J]. 纺织学报, 2019, 40(12): 16-20. |
[5] | 魏艳红, 谢春萍, 刘新金, 苏旭中, 殷高伟. 基于大直径软胶辊的细纱牵伸机制及其应用效果[J]. 纺织学报, 2019, 40(10): 62-67. |
[6] | 郭明瑞, 李沛赢, 孙丰鑫, 高卫东. 双色变换段彩纱成纱原理及其共混段长度与强度的影响因素[J]. 纺织学报, 2019, 40(05): 30-35. |
[7] | 王瑞洁 李龙 秦彩霞 . 采用滑溜牵伸的低比例山羊绒混纺纺纱实践[J]. 纺织学报, 2018, 39(06): 24-28. |
[8] | 姚勇波 颜志勇 李喆 易洪雷 张玉梅 王华平. 牵伸倍率分配对纤维素/丝素蛋白共混纤维形态结构的影响[J]. 纺织学报, 2018, 39(06): 13-18. |
[9] | 敖利民 及二丽 莫晓旋 李向阳 李春钢. 空气网络包覆弹力纱中氨纶丝实际预牵伸倍数测试[J]. 纺织学报, 2017, 38(11): 36-40. |
[10] | 王青 王贯超. FA322B并条机牵伸机构主牵伸区部分参数的优化设计[J]. 纺织学报, 2017, 38(08): 139-143. |
[11] | 罗婷 纪峰 程隆棣 吉宜军 邓万胜. 双S曲线软牵伸纺纱技术[J]. 纺织学报, 2017, 38(07): 34-38. |
[12] | 高志娟 郁崇文. 并条机后区牵伸倍数的模拟设计[J]. 纺织学报, 2017, 38(04): 39-45. |
[13] | 张晓娟 徐伯俊 刘新金. 采用多项式拟合的细纱机双区牵伸与三区牵伸纤维分布对比[J]. 纺织学报, 2016, 37(4): 38-42. |
[14] | 代丽梅 谢春萍 刘新金 张洪. 莱赛尔纱超大牵伸纺纱工艺的优化[J]. 纺织学报, 2016, 37(3): 25-30. |
[15] | 麻宝龙 汪军. 运用离散事件仿真的罗拉牵伸模型[J]. 纺织学报, 2016, 37(2): 125-132. |
|