基于实时性优化的CAN总线织机分布式控制系统

纺织学报 ›› 2008, Vol. 29 ›› Issue (1): 114-117.

基于实时性优化的CAN总线织机分布式控制系统

戴国骏¹;张翔¹;高申勇²;张颖¹

1.杭州电子科技大学计算机应用技术研究所浙江杭州310018;2.浙江水利水电专科学校计算机与信息工程系浙江杭州310018

收稿日期:2007-04-30 修回日期:2007-09-20 出版日期:2008-01-15 发布日期:2008-01-15

Distributed control system of loom based on real-time performance optimized CAN-bus

DAI Guojun;ZHANG Xiang;GAO Shenyong;ZHANG Ying

1.Institute of Computer Application Technology;Hangzhou Dian Zi University;Hangzhou;Zhejiang 310018;China;2.Computer and Information Department;Zhejiang Water Conservancy and Hydropower College;Hangzhou;Zhejiang 310018;China

Received:2007-04-30 Revised:2007-09-20 Online:2008-01-15 Published:2008-01-15

摘要/Abstract

摘要： 为了适应高速织机对电气控制系统通讯实时性的要求,提出了基于CAN总线的织机分布式控制系统。通过分析CAN总线的特性以及与RS-485总线的比较,说明织机采用CAN总线具有优越性和可行性;同时针对影响CAN总线通讯实时性的因素,分别分析了CAN协议本身固有缺陷和应用层协议CANOpen在通讯实时性方面的不足,提出CAN网络实时性优化方法,并给出了实时CANOpen协议的实现过程,及织机分布式控制系统结构。系统运行结果表明,控制系统通讯出错率低,运行稳定,具有一定的应用价值。

Abstract: To meet the real-time performance requirement of high speed loom′s control system,a loom distributed control system based on CAN-bus was presented.Through analyzing CAN-bus′s character and comparing with RS-485 bus,it confirmed the feasibility and superiority of application of the CAN bus on loom;In allusion to the communication real-time performance,it analyzed the inherent limitation of CAN protocol and the deficiencies in application layer protocol CANOpen,a network real-time optimized method was proposed,and the realizing process of protocol CANOpen and the architecture of rapier loom distributed control system were presented.The results of the control system running indicated that it had a low error rate of connunication and worked steadily.The system has some application value.

戴国骏;张翔;高申勇;张颖. 基于实时性优化的CAN总线织机分布式控制系统[J]. 纺织学报, 2008, 29(1): 114-117.

DAI Guojun;ZHANG Xiang;GAO Shenyong;ZHANG Ying. Distributed control system of loom based on real-time performance optimized CAN-bus[J]. JOURNAL OF TEXTILE RESEARCH, 2008, 29(1): 114-117.

参考文献

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed