立体裁剪专用松量模型的开发

纺织学报 ›› 2011, Vol. 32 ›› Issue (3): 105-109.

立体裁剪专用松量模型的开发

郑娟^1,2; 戴建国¹; 徐蓉蓉¹; 陈美珍¹;邵新阳³

1. 浙江理工大学服装学院 2. 湖州艺术与设计学校 3. 杭州职业技术学院

收稿日期:2010-02-03 修回日期:2010-10-28 出版日期:2011-03-15 发布日期:2011-03-15
通讯作者: 戴建国

Development of draping specific ease model

ZHENG Juan^1,2; DAI Jianguo¹; XU Rongrong¹; CHEN Meizhen¹; SHAO Xinyang³

1. Fashion School, Zhejiang Sci-Tech University 2. Huzhou Art & Design School 3. Hangzhou Vocational & Technical College

Received:2010-02-03 Revised:2010-10-28 Online:2011-03-15 Published:2011-03-15

摘要/Abstract

摘要：

鉴于服装企业立体裁剪技术需求的日益扩大和使用立体裁剪净体模型松量加放困难的现状，希望将立体裁剪过程中加放的衣片松量转移到立体裁剪专用模型中，以特定廓型松量模型的研制为例，提出了立体裁剪专用松量模型开发的设想。在论述立体裁剪松量模型概念、作用及其设计思路的基础上，采用非接触式三维人体测量设备，提取被测者的净体与着装截面，运用MER法、图形旋转法、散点平均离散处理、极坐标拟合与插值等方法及MatLab程序设计进行截面处理与分析，总结出特定廓型松量模型的加法设计和减法设计，以及各自的适用性。最后，简要介绍了松量模型的试制和试用验证。

Abstract:

In view of the increasing needs of draping technology in the clothing enterprises and the fact that it is difficult to master easing and adding based on a manikin in draping, the paper proposed to develop a draping model for the purpose of easing and adding. The concept, function and design ideas of the draping model were discussed with practical example. 3-D non-contact scanner was suggested for body measurement, and methods such as MER, graphics rotation, average discrete processing of discrete points, polar fitting and interpolation as well as MatLab program design could be used for processing and analyzing the data. Two methods to design ease model was presented, that is, addition design and subtraction design, along with individual applicability, making and trial application and verification of ease models.

中图分类号:

郑娟;戴建国;徐蓉蓉;陈美珍;邵新阳. 立体裁剪专用松量模型的开发[J]. 纺织学报, 2011, 32(3): 105-109.

ZHENG Juan;DAI Jianguo;XU Rongrong;CHEN Meizhen;SHAO Xinyang. Development of draping specific ease model[J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(3): 105-109.

参考文献

相关文章 15

[1]	彭来湖吕江东汝欣史伟民向忠. 提花圆纬机花型图案嵌入式显现系统[J]. 纺织学报, 2016, 37(08): 138-142.
[2]	施静. 南通地区传统和尚领襁褓套衫的制作技艺[J]. 纺织学报, 2016, 37(06): 107-111.
[3]	孟金凤孟家光张琳玫丁玲玲. 毛涤西服面料的自清洁性能[J]. 纺织学报, 2015, 36(10): 107-0.
[4]	任煜李猛尤祥银. 驻极处理对聚乳酸熔喷材料性能的影响[J]. 纺织学报, 2015, 36(09): 13-17.
[5]	刘咏梅张小雪郭云昕. 国内外服装用人体数据库调查与分析[J]. 纺织学报, 2015, 36(06): 141-0.
[6]	李月荣周岚冯新星陈建勇张建春. 纳米二氧化硅涂料印花雪地伪装织物的制备及性能表征[J]. 纺织学报, 2015, 36(06): 77-0.
[7]	胡晓霞杜英英潘成玉邢彦军. 纳米氧化铝溶胶在棉织物上的吸附模型[J]. 纺织学报, 2015, 36(06): 68-0.
[8]	易世雄邓一民胡杨代亚敏李满秋叶颖. Span40在非离子反胶束体系中对直接黄棕ND3G染色棉织物的影响[J]. 纺织学报, 2014, 35(12): 96-0.
[9]	刘素琼高卫东梁惠娥. 以我国遗存绞缬物为对象的传统扎染技艺研究[J]. 纺织学报, 2014, 35(10): 100-0.
[10]	夏鑫李群华周惠敏魏取福张向武. 皮芯结构Sn∕C包覆碳杂化纳米纤维的制备及其在锂离子负极材料中的应用[J]. 纺织学报, 2014, 35(8): 1-0.
[11]	李旭明. He/O2等离子体处理对混合浆膜表面刻蚀的影响[J]. 纺织学报, 2014, 35(8): 54-0.
[12]	丛洪莲王迪. 针织毛衫的袖型建模与工艺实现[J]. 纺织学报, 2014, 35(8): 69-0.
[13]	夏鑫牛潇周惠敏魏取福. 多孔SnO2纳米纤维的制备与表征[J]. 纺织学报, 2014, 35(7): 13-0.
[14]	夏岩柳国强王宏付. 水族民间马尾绣背带缝制技艺[J]. 纺织学报, 2014, 35(5): 118-0.
[15]	师红宇管声启吴宁. 棉花中异性纤维的图像多分辨率差分检测方法[J]. 纺织学报, 2014, 35(5): 13-0.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed