纺织学报 ›› 2011, Vol. 32 ›› Issue (8): 17-20.

• 纤维材料 • 上一篇    下一篇

非针式静电纺丝工艺及其纳米纤维形态

鄧一安1,黄旭晔2,陈锦江3   

  1. 1. 逢甲大學紡織工程研究所;安特利技研有限公司
    2. 富雅乐企业股份有限公司
    3. 万能科技大学材料工程与科技研究所
  • 收稿日期:2010-08-17 修回日期:2010-12-08 出版日期:2011-08-15 发布日期:2011-08-15

The Morphological of Nanofiber and The Process in Needless Electrospinning

  • Received:2010-08-17 Revised:2010-12-08 Online:2011-08-15 Published:2011-08-15

摘要: 本研究针对聚乙烯醇以水当溶剂,来进行连续非针式静电纺丝奈米纤维之抽丝,而由实验结果我们可得在收集间距12 cm的情况下,其所收集到的纤维平均直径为:165 nm,SD.49 nm,而收集间距在14 cm的情形下之纤维平均直径为:219 nm,SD.62 nm,最后收集间距在16 cm的情形下之纤维平均直径为:141 nm,SD.40 nm,且在整个纤维样品上并无出现凝聚小液滴的型态,并且纤维分布均匀。

Abstract: This study use the Polyvinyl Alcohol to make the nanofiber mat by Non-syringe electrospinning process, we can find the result of different fiber’s diameters on different distance from spin roller to electrode plate. The average diameter is 165 nm (SD. is 49 nm) on 12 cm of the distance from spin roller to electrode plate, another; the average diameter is 219 nm (SD. is 62 nm) on 14 cm and the average diameter is 141 nm (SD. is 40 nm) on 16 cm collection distance. Besides; the bead-on-string structure is not obtained and PVA nanofiber distribute uniformly on the nanofiber mat.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!