电磁铁工作状态对电子多臂摆臂动态性能的影响

纺织学报 ›› 2012, Vol. 33 ›› Issue (12): 80-84.

电磁铁工作状态对电子多臂摆臂动态性能的影响

居伟骏¹,霍铖宇¹,徐刚²,卢达¹

1. 常熟理工学院江苏省纺织机械工程研究中心
2. 常熟纺织机械厂有限公司

收稿日期:2011-11-29 修回日期:2012-07-11 出版日期:2012-12-15 发布日期:2012-12-20
通讯作者: 居伟骏 E-mail:jwj@cslg.edu.cn
基金资助:
江苏省科技成果转化专项资金资助项目

Influence of electromagnet working state on dynamic performance of electronic dobby’s swing arm

Received:2011-11-29 Revised:2012-07-11 Online:2012-12-15 Published:2012-12-20

摘要/Abstract

摘要： 为了改善电子多臂用电磁铁的性能，确定电磁铁工作状态参数对电子多臂摆臂动态性能的具体影响，通过试验对电子多臂用电磁铁的工作电压，气隙宽度，工作温度以及旁路电磁铁的工作状态等参数对电子多臂摆臂动态性能的影响进行了分析和研究，并对进口和国产两种电磁铁的工作情况进行了比较。试验结果表明：这些参数对摆臂的动态性能都存在一定的影响，因此在生产、加工和使用电磁铁时要注意提高加工精度，做好多路电磁铁之间的屏蔽措施，提供稳定可靠的工作电源以及适当的工作环境。

关键词: 电子多臂, 电磁铁, 摆臂, 动态性能

Abstract: In order to improve the performance of electronic Dobby, determine the influence of the electromagnet working state on dynamic performance of electronic dobby’s swing arm, the effects of the electromagnet’s working parameters, such as operating voltage, air gap width, operating temperature and bypass electromagnet ‘s working state, on the dynamic performance of electronic dobby’s swing arm were analyzed and researched by experiments. And the working situations of a imported and a domestic electromagnets were compared. The results show that all these parameters have some influences to it. So during the production, processing and using the electromagnets, we have to improve machining precision, take some shielding measures between multiple electromagnets, provide a stable and reliable power and appropriate environment.

Key words: electronic dobby, electromagnet, swing arm, dynamic performance

中图分类号:

TS103.2

居伟骏霍铖宇徐刚卢达. 电磁铁工作状态对电子多臂摆臂动态性能的影响[J]. 纺织学报, 2012, 33(12): 80-84.

参考文献

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

[1]	沈毅, 高大牛, 刘春雷. 基于ADMAS的GT421型多臂机机构动态仿真[J]. 纺织学报, 2012, 33(8): 119-123.
[2]	周宝明;马崇启. 基于PLC的超重多臂织机控制系统设计[J]. 纺织学报, 2008, 29(8): 101-104.
[3]	李伟. 片梭电子多臂机控制系统软件设计[J]. 纺织学报, 2002, 23(06): 57-59.