纺织学报 ›› 2013, Vol. 34 ›› Issue (4): 45-52.

• 纺织工程 • 上一篇    下一篇

经编间隔织物的冲击性能

郭晓芳, 龙海如   

  1.  东华大学纺织学院
  • 收稿日期:2012-04-18 修回日期:2012-12-18 出版日期:2013-04-15 发布日期:2013-04-09
  • 通讯作者: 龙海如 E-mail:hrlong@dhu.edu.cn

Impact properties of warp knitted spacer fabrics

  • Received:2012-04-18 Revised:2012-12-18 Online:2013-04-15 Published:2013-04-09

摘要: 为探讨间隔织物在一定冲击能量下对人体(支撑物)的保护性能。采用的原料为在拉舍尔双针床经编机上编织的6种不同结构(不同间隔丝梳栉横移针距、间隔丝直径和织物厚度)的间隔织物。分析了不同织物在一定冲击能量下的应力、能量和能量吸收效率特征。实验结果表明,随着间隔丝梳栉横移针距数的减小、间隔丝直径的增大,冲击产生的应力峰值减小,吸收的能量和能量吸收效率峰值增加,但间隔丝过于接近垂直的织物容易发生倒伏,不利于人体保护。较厚的织物产生的应力峰值小、吸收的能量多,中等厚度的织物能量吸收效率峰值高。刚度或厚度大的织物由于产生的应力峰值小有利于人体保护,但在选择织物结构时还需考虑人体穿着的舒适性。

关键词: 经编间隔织物, 冲击性能, 应力, 能量, 保护

Abstract: Spacer fabrics' protection capabilities for human body (support) under particular impact energy were investigated in the paper. The samples were 6 warp-knitted spacer fabrics with different structures, i.e. different moving needles of spacer guide bars, spacer-yarns' diameters and fabric thicknesses, which were produced on double-needle-bed Raschel knitting machine. The characteristic of stress, energy and energy-absorption efficiency were analyzed and the results show that: With the decreasing of moving needles of spacer guide bars and increasing of spacer-yarns' diameters, the peak stress drops, absorbed energy and energy-absorption efficiency rise accordingly. However, fabrics with too vertical spacer yarns do not benefit for protection as they are inclined to collapse. Fabrics with higher thicknesses can be used to absorb more energy thus produce less peak stress, while those with moderate thicknesses are of higher peak efficiency. Although fabrics with larger rigidity and thickness have lower peak stress, which are good for body protection, comfortability should be taken into consideration as well.

Key words: warp knitted spacer fabric, impact property, stress, energy, protection

中图分类号: 

  • TS 186.1
[1] 徐洋 盛晓伟 李昂昂 钱如峰 孙志军. 基于经验模态分解和离散小波能量特征的地毯织机噪声源识别[J]. 纺织学报, 2018, 39(08): 138-143.
[2] 吴小娟 余妙晶 舒慧 郑怡筱 葛烨倩 . 过温保护层合纳米纤维隔膜的制备及其性能[J]. 纺织学报, 2018, 39(07): 21-26.
[3] 牛丽 钱晓明 范金土 张文欢 师云龙. 可降温式消防服的设计与降温效果评价[J]. 纺织学报, 2018, 39(06): 106-112.
[4] 常玉萍 马丕波. 负泊松比经编间隔织物的准静态拉伸性能[J]. 纺织学报, 2018, 39(04): 47-53.
[5] 高哲 蒋高明. 多轴向经编曲面复合材料汽车门低速碰撞数值模拟[J]. 纺织学报, 2018, 39(02): 43-48.
[6] 顾敏明 戴文战. 涤纶织物热定型降耗优化算法[J]. 纺织学报, 2018, 39(01): 164-168.
[7] 常玉萍 马丕波. 基于网眼结构的负泊松比经编间隔织物模型及其拉伸性能[J]. 纺织学报, 2017, 38(09): 59-65.
[8] 房家惠 于伟东. 阻燃涤纶/芳纶/聚苯丙噁唑纤维三轴系复合纱的拉伸性能[J]. 纺织学报, 2017, 38(06): 28-32.
[9] 张晓会 杨大伟 马丕波 缪旭红. 三维经编间隔结构汽车坐垫织物的抗压缩疲劳性能[J]. 纺织学报, 2017, 38(05): 64-68.
[10] 耿沛 邢静忠 陈晓霞. 纤维螺旋缠绕管的缠绕角优化[J]. 纺织学报, 2017, 38(01): 61-66.
[11] 周熠 陈晓钢 张尚勇 龚小舟. 超高分子量聚乙烯平纹织物在柔性防弹服中的应用[J]. 纺织学报, 2016, 37(4): 60-0.
[12] 姜亚明 李宁 张艳梅 . 膝部防护用材料静态缓压性能[J]. 纺织学报, 2016, 37(09): 53-58.
[13] 周熠 张尚勇 龚小舟 徐安长. 摩擦对平纹织物防弹性能影响的研究进展[J]. 纺织学报, 2016, 37(08): 160-164.
[14] 吴波伟 张毅 黄帅 张卢娟 张孟洋. 拼纱根数对空气层组织织物拉伸性能的影响[J]. 纺织学报, 2016, 37(05): 47-0.
[15] 王文莎 阎建华 顾海麟. 二维三轴向编织混杂层合复合材料的冲击性能[J]. 纺织学报, 2015, 36(10): 54-0.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!