纺织学报 ›› 2013, Vol. 34 ›› Issue (9): 113-0.

• 服装工程 • 上一篇    下一篇

男内裤的分体结构及其形态探析

庄立新   

  1. 常州纺织服装职业技术学院
  • 收稿日期:2012-07-31 修回日期:2013-05-03 出版日期:2013-09-15 发布日期:2013-09-12
  • 通讯作者: 庄立新 E-mail:xlz-zlx@163.com

Analyzing on split structure and shape of men's underpants

Li-Xin ZHUANG   

  • Received:2012-07-31 Revised:2013-05-03 Online:2013-09-15 Published:2013-09-12
  • Contact: Li-Xin ZHUANG E-mail:xlz-zlx@163.com

摘要: 本文依据男性下肢带的体表与截面形态,深入研究了男子内裤不同的分体结构及其形态特征,提出了不分体的平面结构、二分体组合的半立体结构、三分体组合的立体结构以及单体独立结构,揭示了这四种分体结构的特点,探讨了分体结构在矫形男内裤中的应用方法和规律。研究表明男内裤的分体结构决定着构成形态,分体程度越高,立体效果越好;分体程度越低,造型越趋于平面化;而且分档点越往前移,男性体征就越明显,分档点越往后移,男性体征就越模糊;分体结构在矫形男内裤中的应用可分为突显体形的局部分体结构和掩饰体形的局部平面结构。

关键词: 男内裤, 下肢带, 分体结构, 分裆点, 三维减量

Abstract: According to analyzing the body surface and section shape of the male lower limbs,the different split structure and the shape characteristic of the male underpants were thoroughly studied.Connected planar structure, half the three-dimensional structure of the two pieces form combination, three-dimensional structure of the three pieces form combination and the separate structure were put forth to reveal the four different kinds of split structure characteristics, the application method and the rule of the split structure in the male orthopedic underpants were discussed.The research indicated that, the male underpants' construction shape is determined by the split structure, the split degree is higher and the three-dimensional effect is better, the split degree is lower and the shape is more towards complanation, the crotch point is moved forward and the male physical characteristics is more obvious , the crotch point is moved backward and the male physical characteristics is fuzzier. The application of the split structure in the male orthopedic underpants can be divided into the partial split structure of highlighting shape and the partial planar structure of concealing shape.

Key words: men's underpants, thighs, split structure, crotch point, three-dimensional reduction

中图分类号: 

  • TS 941.2
[1] 尹玲 张文斌 许才国. 基于有序样本最优分割法的女性体型分类[J]. 纺织学报, 2014, 35(9): 114-0.
[2] 刘咏梅 张闪 崔艳. 论服装设计方法与服装先进制造的逻辑关系[J]. 纺织学报, 2014, 35(8): 81-0.
[3] 尹玲 夏蕾 许才国. 基于随机森林的女性体型判别[J]. 纺织学报, 2014, 35(5): 113-0.
[4] 刘成霞 韩永华 张才前. 基于图像处理的织物弯曲性能测试方法[J]. 纺织学报, 2013, 34(7): 52-56.
[5] 徐娟芳 张三元 董占勋. 传统服饰凤纹的文化构成及其典型度[J]. 纺织学报, 2013, 34(7): 137-142.
[6] 吴巧英 张莎莎. A字裙造型与面料性能的关系[J]. 纺织学报, 2013, 34(6): 88-92.
[7] 庄立新. 基于基本纸样的女装后片浮余量结构转化分析[J]. 纺织学报, 2013, 34(3): 102-108.
[8] 王敏 李俊 李小辉. 燃烧假人在火场热防护服装研究中的应用[J]. 纺织学报, 2013, 34(3): 154-160.
[9] 王方圆 陈晓娜 王建萍. 胸部位移与文胸舒适性关系初探[J]. 纺织学报, 2013, 34(1): 106-109.
[10] 邹平 吴世刚. 连翻领领结构设计数学模型的建立[J]. 纺织学报, 2011, 32(10): 104-0.
[11] 邹平. 分割法造型工艺技术在针织服装中的应用[J]. 纺织学报, 2011, 32(8): 107-111.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!