纺织学报 ›› 2006, Vol. 27 ›› Issue (1): 38-41.

• 研究探讨 • 上一篇    下一篇

丙烯酸酯改性聚氨酯无皂乳液聚合的研究

杨建军1;吴庆云1;张建安1;吴明元1;甄海廷2;王桂琴2   

  1. 1.安徽大学化学化工学院安徽省绿色高分子材料重点实验室 安徽合肥230039 2.无锡市万力粘合材料厂 江苏无锡214028
  • 收稿日期:2004-11-22 修回日期:2005-08-10 出版日期:2006-01-15 发布日期:2006-01-15

Study on polymerization of acrylic modified polyurethane soap-free emulsion

YANG Jian-jun;WU Qing-yun;ZHANG Jian-an;WU Ming-yuan;ZHEN Hai-ting;WANG Gui-qin   

  1. 1.The Key Laboratory of Environment-Friendly Polymer Materials of Anhui Province;School of Chemistry and Chemical Engineering;Anhui
  • Received:2004-11-22 Revised:2005-08-10 Online:2006-01-15 Published:2006-01-15

摘要: 采用无皂乳液聚合方法,用丙烯酸酯单体对含C C双键的水性聚氨酯进行接枝共聚改性,制得丙烯酸酯改性聚氨酯无皂乳液。探讨了反应温度、引发剂用量及搅拌速率对反应的影响;用红外光谱(IR)和透射电镜(TEM)等方法对制备的乳液粒子的形态结构及有关性能进行了分析和表征。结果表明,同改性前的聚氨酯乳液相比,丙烯酸酯改性聚氨酯无皂乳液的粒径明显增大,耐水性、耐溶剂性和抗拉强度都明显提高。

Abstract: An aqueous polyurethane-polyacrylate hybrid emulsion was prepared by soap-free emulsion polymerization of aqueous polyurethane emulsion with C C double bond modified with acrylic monomer through grafting copolymerization.The morphology and properties of composite particles of the prepared emulsion were studied with IR and TEM etc.The influences of reaction temperature,amount of initiator and agitating rate on grafting copolymerization were investigated.Compared with the unmodified polyurethane emulsion,the particle size of the prepared emulsion became larger significantly and its tensile strength,resistance to water and solvent were remarkably improved.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!