纺织学报 ›› 2015, Vol. 36 ›› Issue (03): 92-98.

• 服装工程 • 上一篇    下一篇

病号服的功能性及开口设计

  

  • 收稿日期:2014-02-10 修回日期:2014-08-12 出版日期:2015-03-15 发布日期:2015-03-16
  • 通讯作者: 宋彦杰 E-mail:starting_002@163.com

Function and opening design of patient apparel

  • Received:2014-02-10 Revised:2014-08-12 Online:2015-03-15 Published:2015-03-16

摘要:

目前医院使用的常规病号服既缺乏美观性也缺少功能性,更没有考虑到穿着者在检查治疗中的尊严。本文分析了常规和改良病号服的临床表现,并针对临床需求开展调研,从临床医疗、日常护理和病人心理3方面归纳出病号服的功能性诉求;基于病号服整体功能需求,对病号服各部位的开口进行系统设计,开发出一套既能实现病号服各个关键部位有效开合,满足病人日常治疗、检查、护理的需求,又可以较大程度满足病人保护隐私心理需求的多功能开口病号服;探索性提出病号服的功能性及开口的科学设计方法。

关键词: 功能要求, 病号服, 尊严性, 护理治疗, 开口设计

Abstract:

The regular patient apparels currently used in most of the hospitals is deficient in beauty as functionality. More importantly, it fails to take the dignity of patients into consideration. In this study the conventional and improved patient apparels were analyzed and experimented in clinical research from aspects of clinical examination, general routine nursing, and patient mental requirements, respectively. With the reference of results from the research in requirements, along with the fundamental functions of patient apparel, a systematic design of patient apparel in emphasis on opening position structures is introduced in this paper. The proposed design can achieve the effective opening function at key positions, so as to meet the need of patients during normal treatment, examination, and nursing. Meanwhile it is also able to protect personal privacy in regard to patient psychological requirement. Finally, a scientific design method is proposed as a summary of the opening structure design for patient apparels.

Key words: functional requirement, patient apparel, dignity, nursing and treatment, opening design

[1] 王诗潭 王云仪. 服装通风设计手段的研究进展[J]. 纺织学报, 2017, 38(10): 153-159.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 钟智丽;王训该. 纳米纤维的应用前景[J]. 纺织学报, 2006, 27(1): 107 -110 .
[2] 陈东生.;甘应进.;张宏伟;王建刚;万雅波;白越. 混纺活性炭纤维针刺毡的活化与吸附关系[J]. 纺织学报, 2006, 27(4): 74 -76 .
[3] 戴礼兴;喻绍勇. 部分醇解聚乙烯醇纤维的氢键结构[J]. 纺织学报, 2005, 26(1): 25 -27 .
[4] 周志宇;杨东鹤. 基于计算机视觉技术的蚕丝截面积测量[J]. 纺织学报, 2005, 26(1): 36 -38 .
[5] 谷祝泰. NCO32型起毛机的改进[J]. 纺织学报, 1984, 5(07): 63 -64 .
[6] 程国模. 全国色织产品设计、工艺与仿毛效果学术讨论会[J]. 纺织学报, 1984, 5(08): 15 .
[7] 杨明英;朱良均;闵思佳. 丝绸服饰对人体保健功能的研究概况[J]. 纺织学报, 2000, 21(04): 65 -66 .
[8] 程起时. 我国丝织机技术改造和措施探讨[J]. 纺织学报, 1987, 8(01): 62 -64 .
[9] 汤宝润. 包覆纱加工拉力与强力关系的理论分析[J]. 纺织学报, 1987, 8(02): 14 -15 .
[10] 牟翔凤. 再论气流纱条干不匀的成因[J]. 纺织学报, 1986, 7(05): 28 -31 .