基于全显色结构的双面花纹提花织物设计

纺织学报 ›› 2015, Vol. 36 ›› Issue (05): 39-43.

基于全显色结构的双面花纹提花织物设计

收稿日期:2014-03-12 修回日期:2014-07-16 出版日期:2015-05-15 发布日期:2015-05-12
通讯作者: 周赳 E-mail:zhoujiu34@126.com

Design of double-face jacquard fabric based on full-color structure

Received:2014-03-12 Revised:2014-07-16 Online:2015-05-15 Published:2015-05-12
Contact: ZHOU Jiu E-mail:zhoujiu34@126.com

摘要/Abstract

摘要：

为使数码图像在设计双面花纹织物设计中有更多的颜色讯息保存下来，提出一种新的设计原理和方法：基于全显色结构双面花纹效果的织物设计原理和方法。设计的基本原理是在分层组合设计模式下，通过先分离并单独设计织物的正面和背面结构，然后结合全显色组合织物结构和规则接续组织的运用进行分层组合设计而成。通过这种方法，组合的织物结构在织物正反面可以呈现独立的全显色效果，背面结构被表面结构所覆盖。另外，由于正反面组织和规则接结组织的应用，该织物满足一切平衡交织的要求，并且可以成功地进行工业生产。

关键词: 接结组织, 双面花纹, 多组纬, 提花织物

Abstract:

In order to keep more color information of digital pattern during the design of double-face jacquard fabric with different patterns, this paper presented a new design principle and method of that based on full-color structure. The basic design theory was that with the application of full-color compound fabric structure and regular stitch weaves, under layered-combination design mode, the figured double-face jacquard fabric could be designed through the combination of face and backing fabric structures that were designed, respectively in advance. By such way, the resultant fabric structure is capable of expressing independent full-color figuring effects on both sides of fabric, in which the back structure is covered by face structure. Beside, such fabric meets fully the requirement of balanced interlacement and poses no problem in industrial production by means of the application of the face, back and regular stitch weaves.

Key words: stitch weave, double-face pattern, multi-wejt yarn, jacquard fabric

中图分类号:

TS 941.26

周赳张萌. 基于全显色结构的双面花纹提花织物设计[J]. 纺织学报, 2015, 36(05): 39-43.

参考文献

相关文章 15

[1]	周赳白琳琳. 纬二重渐变全遮盖结构设计研究与实践[J]. 纺织学报, 2018, 39(01): 32-38.
[2]	周赳罗秉芬叶莹洁. 以影光组织为基础的高花效果提花织物设计[J]. 纺织学报, 2017, 38(05): 49-52.
[3]	张爱军蒋高明李欣欣李红梅 . 应用弹簧−质点模型的双贾卡提花织物形变仿真[J]. 纺织学报, 2017, 38(01): 146-151.
[4]	李敏崔树芹陈佳. 应用视觉显著性的小提花织物疵点检测[J]. 纺织学报, 2016, 37(12): 38-42.
[5]	熊莹缪旭红张爱军蒋高明刘伟峰. 经编闪避垫纱提花织物的计算机仿真[J]. 纺织学报, 2016, 37(12): 134-139.
[6]	张爱丹周赳. Red-Green-Blue分色域仿真的数码提花织物设计[J]. 纺织学报, 2016, 37(07): 61-65.
[7]	金兰名蒋高明丛洪莲. 三维纬编提花织物的计算机仿真及系统实现[J]. 纺织学报, 2016, 37(07): 155-161.
[8]	周赳段丽娜屠永坚. 双经双纬渐变显色提花织物设计原理与方法[J]. 纺织学报, 2016, 37(06): 36-41.
[9]	周赳胡丁亭. 基于分层组合模式的叠花效果数码提花织物设计[J]. 纺织学报, 2013, 34(4): 41-44.
[10]	周赳唐澜倩. 基于彩色图像的灰度仿真数码提花织物设计[J]. 纺织学报, 2013, 34(2): 69-72.
[11]	周华, 王春燕, 罗来丽, 李静, 李丹. 基于Kubelka-Munk双常数理论的纬全显色提花织物配色算法[J]. 纺织学报, 2012, 33(5): 35-39.
[12]	聂建斌;何奕中. 多层机织物的组织设计[J]. 纺织学报, 2010, 31(2): 50-53.
[13]	周赳;蒋烨瑾. 基于组合结构的黑白仿真提花织物设计[J]. 纺织学报, 2010, 31(10): 24-28.
[14]	周赳;蒋烨瑾. 基于数码技术的提花织物产品创新[J]. 纺织学报, 2009, 30(11): 53-56.
[15]	周赳;屠永坚. 有彩数码提花织物结构设计的实践与分析[J]. 纺织学报, 2008, 29(4): 54-57.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed