纺织学报 ›› 2016, Vol. 37 ›› Issue (2): 50-54.

• 纺织工程 • 上一篇    下一篇

机织物折皱回复各向异性的研究

  

  • 收稿日期:2015-10-09 修回日期:2015-11-17 出版日期:2016-02-15 发布日期:2016-02-22

Research of anisotropic crease recovery properties of woven fabrics

  • Received:2015-10-09 Revised:2015-11-17 Online:2016-02-15 Published:2016-02-22

摘要:

针对织物的各向异性,研究了纯棉平纹和斜纹织物的折皱回复性能随取向角变化的情况。取向角定义为折痕方向从纬纱方向逆时针旋转到试样长边方向的夹角。实验中,采用织物折皱回复动态测试仪测量不同取向角的动态回复指标,包括初始回复速率、急弹时间、急弹回复角度、缓弹时间、缓弹回复角度。结果表明,仅回复角度随取向角变化存在一定规律性,平纹织物的折皱回复角度随着取向角的增加呈现先增大后减小的趋势,斜纹织物正面对折和反面对折试样的趋势有所不同。试验证明了织物对角线方向能较全面反映结构均匀平纹织物的折皱回复性能,斜纹斜向和其垂直方向能作为斜纹织物的测试角度。

关键词: 织物折皱回复, 各向异性, 动态测试

Abstract:

Aiming at the anisotropy of woven fabric, the changes of the crease recovery properties of 100% plain and twill fabrics with the orientation angle are explored in this research. Orientation angle is the angle measured counterclockwise from the weft direction to the sample’s long axis. The recovery parameters, such as initial recovery rate, instant recovery time, instant recovery angle, stable recovery time and stable recovery angle, were obtained by a dynamic crease recovery tester. The test results illustrate that only the recovery angles changes with the orientation angle. The trend of plain fabric shows that its recovery angle generally increases at first and then decreases with the increase of the orientation angle. The trend of twill fabric differs from folding ways. It is proved that the diagonal direction is the optimal orientation angle for a balanced plain fabric, while the two orthogonal directions, the twill direction and its perpendicular direction, were found to be more reasonable for testing a twill fabric.

Key words: fabric, crease recovery, anisotropy, dynamic testing

[1] 肖红 唐章宏 施楣梧 王群. 织物屏蔽效能的法兰同轴法和屏蔽室法测试对比研究[J]. 纺织学报, 2016, 37(3): 47-0.
[2] 郭囊括 李丽辉 代方银 陈杨 敬凌霄. 柔性多轴向经编聚氨酯涂层织物的拉伸性能[J]. 纺织学报, 2016, 37(11): 59-063.
[3] 蒋双歌 王蕾 王静 刘建立 高卫东. 织物折皱回复的各向异性表征[J]. 纺织学报, 2016, 37(06): 42-47.
[4] 汪泽幸 蒋金华 陈南梁 袁庆锋 . 机织物增强双层柔性复合材料拉伸异向性能及其失效准则[J]. 纺织学报, 2014, 35(8): 38-0.
[5] 杜兆芳;张健;喻华 . 汽车顶棚材料的各向异性研究[J]. 纺织学报, 2008, 29(6): 56-59.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 夏正兴. 纺织教育情报会议在■举行[J]. 纺织学报, 1985, 6(07): 13 .
[2] 李淳;郭雅琳. 多层机织过滤材料的研制[J]. 纺织学报, 2001, 22(02): 37 -39 .
[3] 王兟;张知佑. 转杯纺成纱强力及缠绕纤维百分率的研究[J]. 纺织学报, 1991, 12(11): 8 -11 .
[4] . CWZ301型全幅衬纬经编机鉴定会[J]. 纺织学报, 1986, 7(06): 20 .
[5] 顾伯文;王建凤;李振芬. 中长异形涤麻粘派力司纺织工艺[J]. 纺织学报, 1985, 6(08): 38 -39 .
[6] 马清芳;程贞娟;秦伟明;黄志超;钱建华. 水溶性聚酯的制备及其性能[J]. 纺织学报, 2007, 28(6): 20 -22 .
[7] 江绍群;G.Schmidt-Naake. 用粘度法探讨侧基对共聚苯乙烯性能影响[J]. 纺织学报, 2004, 25(01): 21 -22 .
[8] 王寒枫. 计算机辅助设计涤纶牵伸部件[J]. 纺织学报, 1998, 19(02): 18 -20 .
[9] 陆鑫. 基于特征的服装制板系统参数化设计的实现[J]. 纺织学报, 2006, 27(12): 62 -65 .
[10] 王承轩. 色织面料新品开发之途径[J]. 纺织学报, 2001, 22(05): 34 -36 .