青年女体三维扫描数据的特征围度计算方法

doi:10.13475/j.fzxb.20160507305

摘要/Abstract

摘要：

为检验通过人体特征部位宽度和厚度的关系预测其围度数值的可行性，以330 名20~26岁的青年女体作为样本进行研究。基于三维人体扫描数据，用 Imageware 软件获取胸围、下胸围、腰围、腹围和臀围5个人体特征围度部位的水平截面，测量水平截面的宽度、厚度并计算其比值；引入特征系数将特征部位分成 6 类，并分类对特征围度与其宽度、厚度进行相关分析来验证进行二元线性回归方程设计的可行性；逐类建立特征围度的回归方程并进行验证分析。结果显示，该方法预测的围度值与三维扫描测量的数值误差在± 2cm以内，平均误差在± 0.7cm以内。

关键词: 人体测量, 3-D 扫描, 特征围度, 围度计算, 青年女体

Abstract:

In order to test the feasibility og predicting the circumference of the body by the width and thickness of the body's characteristic position, 330 young women aged 20 to 26 years old were taken as samples for study. Based on 3-D body scanning data, the horizontal section of chest circumference and lwoer chest circumference, waist circumference, abdominal circumference and hip circumference of five body feature parts were obtained by Imageware software.The width and thickness of the horizontal section were measured and the ratio was calculated. Characteristic coefficient was introuced to divide the characteristic parts into six categories, and the correlation analysis on the characteristics of girth and its width and thickness was done to verify the feasibility of the two linear regression equation design. Regression equation of characteristics of girth was established and verifiede by categories. Test results shwo that measuerments predicted by the method has an error of ± 2 cm with numbers measured by 3-D scanning measuring and the average error is within 0.7cm.

Key words: body measurement, 3-D scanning, characteristic girth, circumference calculation, youth female body

李臻颖苏军强吴志明. 青年女体三维扫描数据的特征围度计算方法[J]. 纺织学报, 2017, 38(05): 110-114.

参考文献

[1] 苏军强,刘国联,袁卫娟.基于三维人体测量的服装工业技术数字化研究[J].纺织导报,2009(6):110-111.
SU Junqiang, LIU Guolian, YUAN Weijuan. Study on the digital garment technology based on 3D body measurement[J]. China Textile Leader, 2009(6):110-111.
[2] 匡才远,张秋辰,孔海燕,等.中老年男性体型特征的测量与分析[J].苏州大学学报:工科版,2008, 28(1):17-22.
KUANG Caiyuan, ZHANG Qiuchen, KONG Haiyan,et al.Measurement and analysis on bodily from of medium-elderly men[J]. Journal of Suzhou University: Engineering Science Edition, 2008, 28(1):17-22.
[3] 李晓久,王玉秀,刘皓.非接触式人体测量系统中人体体型分类与自动判别[J].天津工业大学学报,2007, 26(5):33-35.
LI Xiaojiu, WANG Yuxiu, LI Hao. Classification and identification of body type in non-contacted body measurement system[J]. Journal of Tianjin Polytechnic University, 2007, 26(5):33-35.
[4] 钱倩,黄秀丽,刘国联.青年女性肢体围度尺寸预测方法探讨[J].苏州大学学报:工科版,2008, 28(6):24-28.
QIAN Qian, HUANG Xiuli, LIU Guolian. Research on prediction methods of limbs girths of young females[J]. Journal of Suzhou University: Engineering Science Edition, 2008, 28(6):24-28.
[5] 刘芳.面向服装量身定制的非接触式人体测量技术研究[D].大连:大连工业大学,2013.
LIU Fang. Research on non-contact body measurement technology for customizing[D]. Dalian :Dalian Polytechnic University,2013.
[6] 任弘,王馨塘,吴晓薇,等.三维人体扫描技术在身体形态测量中的应用[J].北京体育大学学报, 2013(1):51-54.
REN Hong, WANG Qintang, WU Xiaowei, et al. Application of 3D body scan technique to the measurement and evaluation in sports science[J]. Journal of Beijing Sport University, 2013(1):51-54.
[7] 孙晓东.人体点云数据处理中若干问题的研究[D].北京:北京工业大学,2012.
SUN Xiaodong. Research on several problems in point cloud data processing of human body[D]. Beijing :Beijing University of Technology, 2012.
[8] SU Junqiang, LIU Guolian, XU Bugao. Development of individualized pattern prototype based on classification of body features[J]. International Journal of Clothing Science and Technology, 2015,27(6):895-907.
[9] SU Junqiang, GU Bingfei, LIU Guolian, et al. Determination of distance ease of pants using 3D scanning data[J]. International Journal of Clothing Science and Technology, 2015, 27(1):47-59.
[10] GU Bingfei, SU Junqiang, LIU Guolian, Pattern alteration of women’s suits based on ease distribution[J]. International Journal of Clothing Science and Technology, 2016, 28(2):201-215.

相关文章 15

[1]	吴尚齐琳周双喜尚笑梅. 非接触式测量获取背部图形的拟合及其验证[J]. 纺织学报, 2018, 39(04): 111-115.
[2]	贺义军石小强王宏付. 青年女性肩部弯度特征及对贴体女上装结构影响[J]. 纺织学报, 2016, 37(10): 94-100.
[3]	刘咏梅张小雪郭云昕. 国内外服装用人体数据库调查与分析[J]. 纺织学报, 2015, 36(06): 141-0.
[4]	石小强王宏付. 青年女性臀部高度特征分析[J]. 纺织学报, 2015, 36(05): 74-78.
[5]	张吉生吴志明储云明. 经编无缝女束身上衣的塑身性能[J]. 纺织学报, 2014, 35(3): 109-0.
[6]	李晓志李晓久. 基于部位划分的三维人体曲面模型的构建[J]. 纺织学报, 2013, 34(9): 145-0.
[7]	王晓霞戴建国王春霞端丹. 青年女性体表角度分析[J]. 纺织学报, 2013, 34(7): 106-110.
[8]	陈益松夏明林琳. 光栅相移法用于三维人体测量的实验研究[J]. 纺织学报, 2013, 34(6): 83-87.
[9]	王永进. 动态人体尺寸的测量方法[J]. 纺织学报, 2013, 34(4): 104-110.
[10]	何姗姗唐虹魏巍. 江浙地区女青年人体美的主客观评价[J]. 纺织学报, 2013, 34(12): 96-0.
[11]	王珊珊王鸿博. 基于三维人体测量的江浙在职男青年颈部形态[J]. 纺织学报, 2013, 34(10): 131-0.
[12]	张秀, 王宏付. 基于三维人体测量的青年女性裆底高特征探讨[J]. 纺织学报, 2012, 33(7): 100-103.
[13]	张宁, 王宏付. 基于三维人体测量的江浙女模特体型分类[J]. 纺织学报, 2012, 33(6): 71-75.
[14]	郭虹迟晓丽. 湖南地区大学生体型特点分析[J]. 纺织学报, 2011, 32(6): 109-112.
[15]	张金花;王宏付. 基于三维人体测量的女性肩部研究[J]. 纺织学报, 2011, 32(5): 95-97.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed