JOURNAL OF TEXTILE RESEARCH ›› 2018, Vol. 39 ›› Issue (08): 63-70.doi: 10.13475/j.fzxb.20170708408

Previous Articles     Next Articles

Process and application of full-forming knitting with four-needle bed

  

  • Received:2017-07-24 Revised:2018-05-03 Online:2018-08-15 Published:2018-08-13

Abstract:

In order to study the forming principle, forming method and the corresponding full-forming product design method of four-needle bed computerized flat knitting machine,  detailed analysis of the forming method of unequal length knitting, lead back, narrowing and widening, pleat, translational docking and other knitting technology in tubular knitting was carried out by means of a full-forming computerized flat knitting machine combined with DS-ONE APPEX 3 design system. The knitting process was applied in full-forming sleeveless dress. The results show that when the rear collar strip of the full-forming garment is spliced with the rear collar arc, the knitting ratio can be determined according to the difference between transverse density of the rear collar arc and the longitudinal density of the rear collar strip. During non-tubular knitting kicking yarn feeder back is used to solve the technical problems of the influence of the yarn feeder parking position and yarn feeding of the yarn feeder on needle turning. When knitting tubular fabric with large difference between the stitch numbers of front and rear needle beds, needle turning is needed to move the stitch to the needle bed with a small number of stitches, so that the knitting width of the front and rear needle beds is consistant.

Key words: full-forming garment, peoduct design, four-needle bed computerized flat kniting machine, kniting process, forming principle

[1] . Computer-aided design of warp-knitted double jacquard shoe-upper [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(11): 148-153.
[2] . Forming principle and computer-aided design of warp knitted seamless fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(02): 55-0.
[3] FAN Li-shan;LAI Kan;SUN Run-jun;YAO Mu. Production principle of the tri-component filament and staple fiber composite yarn [J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(11): 40-43.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] . Noise source identification of carpet tufting machine based on empirical mode decomposition and energy characteristics[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 138 -143 .
[2] . Permeability of glass fiber fabrics under shear deformation[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 58 -62 .
[3] . Designing method of random fabric based on random lifting of heald frames[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 33 -40 .
[4] . Drying eperiment and kinetics of wetted fabrics exposed to thermal radiation[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 52 -57 .
[5] . Single component textile identification based on continuous projection algorithm and least squares support vector machine[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 46 -51 .
[6] . In fluences of raw materials and fabric parameters on performance of anti-arc fabrics[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 41 -45 .
[7] . Supercritical carbon dioxide extraction and bacterial resistance of flavones from apocynum venetum bast fiber[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 71 -76 .
[8] . Color difference measurement of dyed fabrics using digital camera [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 77 -82 .