Journal of Textile Research ›› 2019, Vol. 40 ›› Issue (01): 130-135.doi: 10.13475/j.fzxb.20180104106

• Apparel Engineering • Previous Articles     Next Articles

Parametric flat pattern design for clothing based on MatLab

ZHANG Lingli, ZHANG Gaopeng()   

  1. College of Light Industry & Textile & Food Engineering, Sichuan University, Chengdu, Sichuan 610065, China
  • Received:2018-01-17 Revised:2018-09-26 Online:2019-01-15 Published:2019-01-18
  • Contact: ZHANG Gaopeng E-mail:zgp@scu.edu.cn

Abstract:

In order to solve the low efficiency of software in apparel CAD in manual methods and unsuitability of the scaled pattern to various independent garment specifications, a parametric pattern making software was developed for the back body of a shirt based on the MatLab platform of software development. A program of garment pattern making was explored by methods of template calculating, data visualizing and interactive program developing. The results show that the back body pattern of shirt with a certain series of garment sizes can be obtained after running of the software driven by the garment specifications. The garment patterns can be created or updated automatically withindependently changeable sizes with in a few seconds. Thus, the parametric flat pattern design technology based on MatLab can promote the response capability of apparel customization.

Key words: garment CAD, garment pattern design, parametric pattern design, men's shirt

CLC Number: 

  • TS941.2

Fig.1

Procedures of parametric clothing pattern platemaking"

Fig.2

Structure of back of men's standardized shirt"

Tab.1

Structural relationship between sizes of back of men's standardized shirt"

部位 尺寸计算公式 结构线
背长 b1 P2P9
衣长 c1 P2P14
后领宽 n1/5-0.5 P1P2
后领深 n1/15-0.17 P1P3
后落肩 n1/15-0.17 P21P22
后肩突出 2 P4P21
袖孔深 b/6+9.5 P2P6
后背宽 b/6+4 P15P16
后身宽 b/4+5 P5P6
收腰量 0.7 P7P8
后腰围 b/4+4.3 P8P9
侧缝下摆收缩量 1 P10P11
后育克省量 0.8 P19P20
后育克深 b/24+17/8 P2P17
后背褶量 3.5 P17P18
弧形下摆深 14 P10P12

Tab.2

Key points of back of men's standardized shirt"

x坐标 y坐标
P1 -n1/5+1/2 b1
P2 0 b1
P3 -n1/5+1/2 b1+nl/15-1/6
P4 -s1/2 b1-n1/15+1/6
P5 -b/4-5 b1-b/6-9.3
P6 0 b1-b/6-9.3
P7 -b/4-5 0
P8 -b/4-4.3 0
P9 0 0
P10 -b/4-5 -c1+bl+14
P11 -b/4-4 -c1+bl+14
P12 -b/4-5 -c1+bl
P13 -b/8-2.5 -c1+bl
P14 0 -c1+b1
P15 -b/6-4 b1-b/12-19/4
P16 0 b1-b/12-19/4
P17 0 b1-b/24-19/8
P18 3.5 b1-b/24-19/8
P19 -b/6-6 b1-b/24-19/8
P20 -b/6-6 b1-b/24-63/40
P21 -b/6-4 b1-n1/15+1/6
P22 -b/6-4 b1

Fig.3

Clothing pattern of back of men's standardized shirt based on reference values"

Tab.3

Values of key parameters of three different versions of men's shirtcm"

号型 b n1 s1 b1 c1
165/84 A 84 35.8 42.4 41.5 70
170/88 A 88 36.8 43.6 42.5 72
175/92 A 92 37.8 44.8 43.5 74

Fig.4

Clothing pattern contrast for different values of key parameters."

Fig.5

Contrast of clothing pattern platemaking of three different sizes"

Fig.6

Clothing pattern contrast of different defined waist values"

[1] 王璐璐, 王军, 伞文, 等. 数字化服装设计的发展与技术创新研究[J]. 山东纺织科技, 2016,57(5):35-38.
WANG Lulu, WANG Jun, SAN Wen, et al. A research on the development of digital fashion design and technology innovation[J]. Shandong Textile Science & Technology, 2016,57(5):35-38.
[2] 竺梅芳. 智能化服装CAD制版技术发展研究[J]. 浙江纺织服装职业技术学院学报, 2016,15(2):38-40.
ZHU Meifang. Research on the development of intelligent clothing CAD plate making technology[J]. Journal of Zhejiang Textile & Fashion Vocational College, 2016,15(2):38-40.
[3] 彭贝. 基于约束图的服装参数化制板技术[D]. 北京:北京服装学院, 2012: 5-7.
PENG Bei. The technology of garment parameterization based on constraint graph[D]. Beijing: Beijing Institute of Fashion Technology, 2012: 5-7.
[4] 王宗荣, 张皋鹏. 新版文化女装衣身原型参数化制图数学模型[J]. 纺织学报, 2009,30(3):82-87.
WANG Zongrong, ZHANG Gaopeng. Study of parameterized cartography on mathematic model for cultural garment prototype of female bodies[J]. Journal of Textile Research, 2009,30(3):82-87.
[5] 杨建强, 罗先香. MatLab软件工具箱简介[J]. 水科学进展, 2001(2):237-242.
YANG Jianqiang, LUO xianxiang. Introduction of the MatLab tool box[J]. Advances in Water Science, 2001(2):237-242.
[6] 张伶俐, 张皋鹏. MatLab参数化在服装个性化订制中的应用[J]. 西部皮革, 2016,38(22):42-43.
ZHANG Lingli, ZHANG Gaopeng. The application of MatLab parameterization in clothing customization[J]. West Leather, 2016,38(22):42-43.
[7] 张志群, 常明, 刘雯林. 参数化系统设计[J]. 计算机工程与应用, 2002(7):130-132.
ZHANG Zhiqun, CHANG Ming, LIU Wenlin. Design of parameterized system[J]. Computer Engineering and Applications, 2002(7):130-132.
[8] 姜泽虹. 男西装部件库的构建及其样板参数化关系模型的研究[D]. 西安:西安工程大学, 2014: 12-14.
JIANG Zehong. The construction of male suit component library and the research on the model of the model parameters[D]. Xi'an: Xi'an Polytechnic University, 2014: 12-14.
[9] 宋琨, 张渭源. 用贝塞尔曲线拟合服装结构曲线的处理方法[J]. 国际纺织导报, 2001(4):76-79.
SONG Kun, ZHANG Weiyuan. Approximation of the apparel construction curves with bezier curves[J]. Melliand China, 2001(4):76-79.
[10] 刘瑞璞. 服装纸样设计原理与应用: 男装编[M]. 北京: 中国纺织出版社, 2008: 183-185.
LIU Ruipu. The Principles & Practices of Pattern Design:Men's Wear[M]. Beijing: China Textile & Apparel Press, 2008: 183-185.
[1] . Research on CAD flexible model for pattern design of four-piece female suit [J]. Journal of Textile Research, 2015, 36(06): 97-105.
[2] . Fashion geometric printing pattern designing based on mathematical method [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(3): 141-0.
[3] SONG Hongxing;LI Zhong;NI Hui;GAO Jun;PENG Chensong. Size information extraction from 3-D body based on approximate shortest paths [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(3): 138-142.
[4] LIU Jun;LI Zhong;HU Jueliang. 3D clothing fitting research based on feature matching [J]. JOURNAL OF TEXTILE RESEARCH, 2009, 30(01): 122-126.
[5] WANG Zhan;ZHANG Hui;ZHAO Yuling. Modeling and exhibition technique in 3-D garment CAD [J]. JOURNAL OF TEXTILE RESEARCH, 2008, 29(4): 91-94.
[6] ZHANG Xiao-qian;GU Xin-jian;XU Yuan-yuan. Discussion on the ASP mode for the information technology of the textile and garment industry [J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(9): 114-117.
[7] LI Zhong;MA Li-zhuang;HUANG Jian. Application of the cubic Bzier spline curve in garment pattern design [J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(5): 53-55.
[8] WANG Hong-fu;LIN Yi. Study on the curve modification of garment pattern CAD [J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(4): 53-55.
[9] WU Zhi-ming;WANG Peng. Applying the aspect orient mannequin modeling to garment CAD [J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(3): 47-51.
[10] HU Jue-liang;DONG Jian-ming;HE Ying;ZOU Feng-yuan. Garment pattern design based on artificial neural network [J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(2): 49-52.
[11] LIU Yan;LIU Xiao-gang . Fashion-design expert system facing unprofessional customer [J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(1): 67-69.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!