Journal of Textile Research ›› 2019, Vol. 40 ›› Issue (06): 152-157.doi: 10.13475/j.fzxb.20180802906

• Comprehensive Review • Previous Articles     Next Articles

Research progress in recycling and reuse of carbon fiber reinforced resin composites

RUAN Fangtao1(), SHI Jian2, XU Zhenzhen1, XING Jian1   

  1. 1. College of Textile and Garment, Anhui Polytechnic University, Wuhu, Anhui 241000, China
    2. Faculty of Systems Science and Technology, Akita Prefectural University, Akita 015005, Japan
  • Received:2018-08-10 Revised:2019-03-06 Online:2019-06-15 Published:2019-06-25

Abstract:

In order to recover carbon fiber reinforced resin composites(CFRP) effectively, avoid waste of resources and environmental pollution, recycling methods and progress of thermosetting and thermoplastic resin-based carbon fiber composites were reviewed in this paper. These methods include physical mechanical method, heat recovery, solvent dissociation, melt injection and slice remolding, etc. The recovery idea of solvent dissociation method was sorted out. The degradable thermosetting resin and its recovery method were introduced. The recycling mechanism of carbon fiber reinforced thermoplastic resin was described.The recycling methods of carbon fiber reinforced thermosetting resins were summarized, which have the characteristics of low recycling efficiency, high equipment requirements and poor performance of regenerated carbon fibers. It is considered that carbon fiber reinforced thermoplastic resin composite has the characteristics of rapid prototyping, low cost and multiple recycling, which is suitable for the development trend of large-scale application of CFRP in civil field.

Key words: carbon fiber, thermosetting resin, thermoplastic resin, recycling method, reutilization

CLC Number: 

  • TB332
[1] WITIK R A, TEUSCHER R, MICHAUD V, et al. Carbon fibre reinforced composite waste: an environmental assessment of recycling, energyrecovery and landfilling[J]. Composites: Part A, 2013,49(1):89-99.
doi: 10.1016/j.compositesa.2013.02.009
[2] PIMENTA S, PINHO S T. Recycling carbon fibre reinforced polymers for structural applications: technology review and market outlook[J]. Waste Management, 2011,31(2):378-392.
doi: 10.1016/j.wasman.2010.09.019 pmid: 20980138
[3] MENG F, MCKECHNIE J, TURNER T, et al. Environmental aspects of use of recycled carbon fibre composites in automotive applications[J]. Environmental Science and Technology, 2017,51:12727-12736.
doi: 10.1021/acs.est.7b04069 pmid: 29017318
[4] PICKERING S J. Recycling technologies for thermoset composite materials: current status[J]. Composites Part A: Applied Science & Manufacturing, 2006,37(8):1206-1215.
[5] BESSA J, MATOS J, MOTA C, et al. Influence of surface treatments on the mechanical properties of fibre reinforced thermoplastic composites[J]. Procedia Engineering, 2017,200:465-471.
doi: 10.1016/j.proeng.2017.07.065
[6] WU G, MA L, LIU L, et al. Interface enhancement of carbon fiber reinforced methylphenylsilicone resin composites modified with silanized carbon nano-tubes[J]. Materials & Design, 2016,89:1343-1349.
[7] 景鹏展, 朱姝, 余木火, 等. 基于碳纤维表面修饰制备碳纤维织物增强聚苯硫醚(CFF/PPS) 热塑性复合材料[J]. 材料工程, 2016,44(3):21-27.
JING Pengzhan, ZHU Shu, YU Muhuo, et al. Preparation of carbon fiber fabric reinforced polyphenylene sulfide (CCF/PPS) thermoplastic composites based on surface modification of carbon fiber[J]. Journal of Materials Engineering, 2016,44(3):21-27.
[8] HAYASHI R, KOSUKEGAWA H, TAKAGIT . Evaluation of influence of surface chemical modification on fiber in interfacial shear strength between PP/PA polymer alloy and carbon single filament[J]. Journal of the Japan Society of Mechanical Engineers, 2016,4(50):1-15.
[9] AGEORGES C, YE L. State of the Art in Fusion Bonding of Polymer Composites[M]. London: Fusion Bonding of Polymer Composites, 2002: 7-64.
[10] PALMER J, GHITA O R, SAVAGE L, et al. Successful closed-loop recycling of thermoset compo-sites[J]. Composites Part A, 2009,40:490-498.
[11] OGI K, NISHIKAWA T, OKANO Y, et al. Mechanical properties of ABS resin reinforced with recycled CFRP[J]. Advance Composite Material, 2007,16:181-194.
[12] PALMER J, SAVAGE L, GHITA O R, et al. Sheet moulding compound (SMC) from carbon fibre recyc-late[J]. Composites: Part A, 2010,41(9):1232-1237.
[13] YANG Y, BOOM R, IRION B, et al. Recycling of composite materials[J]. Chemical Engineering & Processing Process Intensification, 2012,51(1):53-68.
[14] MEYER L O, SCHULTE K. CFRP-recycling following a pyrolysis route: process optimization and potentials[J]. Journal of Composite Material, 2009,43:1121-1132.
[15] PICKERING S J, KELLY R M, KENNERLEY J R, et al. A fluidised-bed process for the recovery of glass fibres from scrap thermoset composites[J]. Composite Science and Technology, 2000,60:509-523.
[16] LESTER E, KINGMAN S, WONG K H, et al. Microwave heating as a means for carbon fibre recovery from polymer composites: a technical feasibility study[J]. Materials Research Bbulletin, 2004,39:1549-1556.
[17] YANG J, LIU J, LIU W, et al. Recycling of carbon fibre reinforced epoxy resin composites under various oxygen concentrationsinnitrogen-oxygen atmosphere[J]. Journal of Analytical & Applied Pyrolysis, 2015,112:253-261.
[18] PIMENTA S, PINHO S T. Recycling carbon fibre reinforced polymers for structural applications: technology review and market outlook[J]. Waste Manage, 2011,31:378-392.
[19] YIP H L H, PICKERING S J, RUDD C D. Characterisation of carbon fibres recycled from scrap composites using fluidised bed process[J]. Plastics Rubber and Composite, 2002,31:278-282.
[20] MARSH G. Reclaiming value from post-use carbon composite[J]. Reinforced Plastics, 2008,52(7):36-39.
[21] BINNER E, MEDIERO M, HUDDLE T, et al. Factors affecting the microwave coking of coals and the implications on microwave cavity design[J]. Fuel Processing Technology, 2014,125(9):8-17.
[22] PALMER J, SAVAGE L, GHITA O R, et al. Sheet moulding compound (SMC) from carbon fibre recyc-late[J]. Composites: Part A, 2010,41:1232-1237.
[23] YANG Y, BOOM R, IRION B, et al. Recycling of composite materials[J]. Chemical Engineering & Processing Process Intensification, 2012,51(1):53-68.
[24] MEYER L O, SCHULTE K. CFRP-recycling following a pyrolysis route: process optimization and potentials[J]. Journal of Composite Material, 2009,43:1121-1132.
[25] PICKERING S J, KELLY R M, KENNERLEY J R, et al. A fluidised-bed process for the recovery of glass fibres from scrap thermoset composites[J]. Composite Science and Technology, 2000,60:509-523.
[26] LESTER E, KINGMAN S, WONG K H, et al. Microwave heating as a means for carbon fibre recovery from polymer composites: a technical feasibility study[J]. Materials Research Bbulletin, 2004,39:1549-1556.
[27] YANG J, LIU J, LIU W, et al. Recycling of carbon fibre reinforced epoxy resin composites under various oxygen concentrationsinnitrogen-oxygen atmosphere[J]. Journal of Analytical & Applied Pyrolysis, 2015,112:253-261.
[28] PIMENTA S, PINHO S T. Recycling carbon fibre reinforced polymers for structural applications: technology review and market outlook[J]. Waste Manage, 2011,31:378-392.
[29] YIP H L H, PICKERING S J, RUDD C D. Characterisation of carbon fibres recycled from scrap composites using fluidised bed process[J]. Plastics Rubber and Composite, 2002,31:278-282.
[30] MARSH G. Reclaiming value from post-use carbon composite[J]. Reinforced Plastics, 2008,52(7):36-39.
[31] BINNER E, MEDIERO M, HUDDLE T, et al. Factors affecting the microwave coking of coals and the implications on microwave cavity design[J]. Fuel Processing Technology, 2014,125(9):8-17.
[32] WANG Y, LIU J, WU G, et al. Recycling of carbon fiber reinforced epoxy resin cured with anhydride in subcritical water[J]. Chinese Journal of Applied Chemistry, 2013,30:643-647.
[33] 陈丕钰. 碳纤维增强复合材料的电化学回收方法研究[D]. 深圳:深圳大学, 2017: 78-82.
CHEN Peiyu. Electrochemical recovery of carbon fiber reinforced composites[D]. Shenzhen:Shenzhen University, 2017: 78-82.
[34] SHI J, BAO L. Optimum decomposition conditions for glass fiber reinforced plastic recycling by superheated steam[J]. Japanese Journal of Applied Physics, 2011,50(1):1-5.
[35] SHI J, BAO L, KOBAYASHI R, et al. Reusing recycled fibers in high-value fiber-reinforced polymer composites: improving bending strength by surface cleaning[J]. Composites Science and Technology, 2012,72(11):1298-1303.
[36] DENISSEN W, DROESBEKE M, NICOLAY R, et al. Chemical control of the viscoelastic properties of vinylogous urethane vitrimers[J]. Nature Communications, 2017(8):14-57.
[37] RÖTTGER M, DOMENECH T, VAND W R, et al. High-performance vitrimers from commodity thermoplastics through dioxaborolane metajournal[J]. Science, 2017,356(6333):62.
pmid: 28386008
[38] 梁波, 覃兵, 李欣. 碳纤维增强可降解环氧树脂基复合材料[C]//第二届中国国际复合材料科技大会论文集. 镇江:中国复合材料学会, 2015: 72-78.
LIANG Bo, TAN Bing, LI Xin. Carbon fiber reinforced degradable epoxy resin matrix composites[C]//Second China International Conference on Composite Materials Science and Technology. Zhenjiang: China Society of Composite Materials, 2015: 72-78.
[39] 于天淼, 高华兵, 王宝铭, 等. 碳纤维增强热塑性复合材料成型工艺的研究进展[J]. 工程塑料应用, 2018,46(4):139-144.
YU Tianmiao, GAO Huabing, WANG Baoming, et al. Reserch progress of molding process of carbon fiber reinforced thermoplastic composites[J]. Engineering Plastics Application, 2018,46(4):139-144.
[40] 刘旭. 一种连续纤维增强热塑性复合材料废料回收利用方法: 103786352A[P]. 2014-05-14.
LIU Xu. A method for recycling waste of continuous fiber reinforced thermoplastic composites: 103786352A[P]. 2014-05-14.
[41] LONGANA M L, ONG N, YU H N, et al. Multiple closed loop recycling of carbon fibre composites with the HiPerDiF (high performance discontinuous fibre) method[J]. Composite Structures, 2016,153:271-277.
[42] GUELL D C, GRAHAM A L. Improved mechanical properties in hydrodynamically aligned, short-fiber composite materials[J]. Journal of Composite Material, 1996,30(1):2-12.
[43] FLEMMING T. A new aligned short-carbon-fiber-reinforced thermoplastic prepreg[J]. Advance Composite Material, 1996,5(2):151-159.
[44] WAN Y, TAKAHASHI J. Tensile and compressive properties of chopped carbon fiber tapes reinforced thermoplastics with different fiber lengths and molding pressures[J]. Composites Part A: Applied Science & Manufacturing, 2016,87:271-281.
[45] YAMASHITA S, SONEHARA T, TAKAHASHI J, et al. Effect of thin-ply on damage behaviour of continuous and discontinuous carbon fibre reinforced thermoplastics subjected to simulated lightning strike[J]. Composites Part A: Applied Science & Manufacturing, 2017,95:132-140.
[46] LIU X, TAKAHASHI J, WAN Y, et al. Determination of transverse flexural and shear moduli of chopped carbon fiber tape-reinforced thermoplastic by vibra-tion[J]. Journal of Composite Materials, 2018,52:21-31.
[47] 田小永, 刘腾飞, 杨春成, 等. 高性能纤维增强树脂基复合材料3D打印及其应用探索[J]. 航空制造技术, 2016,59(15):26-31.
TIAN Xiaoyong, LIU Tengfei, YANG Chuncheng, et al. 3D printing for high performance fiber reinforced polymer composites and exploration on its applications[J]. Aeronautical Manufacturing Technology, 2016,59(15):26-31.
[1] SHEN Yue, JIANG Gaoming, LIU Qixia. Analysis on acoustic absorption performance of activated carbon fiber felts with gradient structure [J]. Journal of Textile Research, 2020, 41(10): 29-33.
[2] DAI Xin, LI Jing, CHEN Chen. Finite element simulation on wear resistance of copper-plated carbon fiber tows [J]. Journal of Textile Research, 2020, 41(06): 27-35.
[3] LI Liping, WU Daoyi, ZHAN Yikai, HE Min. Review on carbon fiber surface modification using electrophoretic deposition of carbon nanotubes and graphene oxide [J]. Journal of Textile Research, 2020, 41(06): 168-173.
[4] LU Hao, CHEN Yuan. Surface defect detection method of carbon fiber prepreg based on machine vision [J]. Journal of Textile Research, 2020, 41(04): 51-57.
[5] ZHAO Yaqi, GUO Wenjing, DU Lingzhi, ZHAO Zhenxin, ZHAO Haipeng. Research progress of high relative molecular weight polyacrylonitrile prepared by radical initiators [J]. Journal of Textile Research, 2020, 41(04): 174-180.
[6] WANG Xianghua, CHENG Ling, ZHANG Yifan, PENG Haifeng, HUANG Zhiwen, LIU Xiaozhi. Structural design and finite element analysis of landing gear with leaf spring made of 3-D woven composite [J]. Journal of Textile Research, 2020, 41(03): 68-77.
[7] LUO Jiani, LI Lijun, ZHANG Xiaosi, ZOU Hantao, LIU Xueting. Modification of activated carbon fiber using graphene oxide doped titanium dioxide [J]. Journal of Textile Research, 2020, 41(01): 8-14.
[8] DONG Ke, LI Siming, WU Guanzheng, HUANG Hongrong, LIN Zhongshi, XIAO Xueliang. Preparation and properties of carbon fiber / polyester electrocardiogram monitoring embroidery electrode [J]. Journal of Textile Research, 2020, 41(01): 56-62.
[9] ZHANG Ze, XU Weijun, KANG Hongliang, XU Jian, LIU Ruigang. Thoughts on preparation technology of high performance polyacrylonitrile-based carbon fibers [J]. Journal of Textile Research, 2019, 40(12): 152-161.
[10] ZHENG Zhenrong, ZHI Wei, HAN Chenchen, ZHAO Xiaoming, PEI Xiaoyuan. Numerical simulation of heat transfer of carbon fiber fabric under impact of heat flux [J]. Journal of Textile Research, 2019, 40(06): 38-43.
[11] CHEN Yue, ZHAO Yonghuan, CHU Zhudan, ZHUANG Zhishan, QIU Linlin, DU Pingfan. Research progress of flexible lithium battery electrodes based on carbon fibers and their fabrics [J]. Journal of Textile Research, 2019, 40(02): 173-180.
[12] YE Wei, SUN Lei, YU Jin, SUN Qilong. Preparation and microwave absorption property of flexible lightweight magnetic particles-carbon fiber composites [J]. Journal of Textile Research, 2019, 40(01): 97-102.
[13] . Braiding technologies of 2-D braided carbon fiber tubular fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(06): 64-69.
[14] . Kinematics analysis and dimension synthesis of beating-up mechanism for carbon fiber multi-layer loom [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(11): 137-142.
[15] . Bending peoperties comparison of thick-section carbon fiber composites based on different three-dimensional woven structures [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(09): 66-71.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!