Journal of Textile Research ›› 2019, Vol. 40 ›› Issue (10): 152-157.doi: 10.13475/j.fzxb.20181100706

• Apparel Engineering • Previous Articles     Next Articles

Influence of body surface convex angle on waist section ease

YING Xin1, CHENG Bilian1, LIU Zheng1,2,3(), ZOU Fengyuan1,2,3   

  1. 1. School of Fashion Design Engineering, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
    2. Key Laboratory of Silk Culture Inheriting and Products Design Digital Technology, Ministry of Culture and Tourism, Hangzhou, Zhejiang 310018, China
    3. Zhejiang Provincial Research Center of Clothing Engineering Technology, Hangzhou, Zhejiang 310018, China
  • Received:2018-11-02 Revised:2019-06-26 Online:2019-10-15 Published:2019-10-23
  • Contact: LIU Zheng E-mail:koala@zstu.edu.cn

RichHTML

8

PDF (PC)

154

Abstract:

In order to reveal the influence of the body surface convex angle on the waist section ease distribution, by wearing the same clothes with various ease on the standard body shape table, the data and characteristics of the clothing ease amount were collected and analyzed by a [TC]2 3-D body scanner and Geomagic software. By calculating the distance from the normal direction of the body surface point, the waist ease value was determined. Then the influence of chest convex angle and back slope angle on the amount of waist section ease under different ease was investigated. The results show that for tight clothing with the ease below 4 cm, the body surface convex angle is weakly related to the amount of waist ease. For the combined clothing with the ease of 6-12 cm, the chest convex angle at 120° region and the back slope angle at 0°-30° region have the greatest influence on the waist ease amount distribution. For loose clothing with the ease more than 16 cm, no correlation exists between the ease amount distribution and the chest convex angle, while a significant correlation exists between the back slope angle and the ease amount distribution. The fit goodness of the regression equation is well, and the R2 value of 30° region and 120° region regression equation is above 0.95.

Key words: ease allowance, body surface convex angle, ease, waist section

CLC Number: 

  • TS941.2

Fig.1

Chest convex angle and back slope angle"

Fig.2

Experiment mannequin"

Fig.3

Measurement of angle"

Tab.1

Chest convex angle specification(°)"

X1 X2 X3 X4 X5 X6 X7
14.0 24.5 26.5 28.0 28.1 31.2 33.4

Tab.2

Experimental clothes size specification"

样衣编号 胸围B/cm 腰围W/cm 臀围H/cm
1# 86 70 86
2# 90 74 90
3# 92 76 92
4# 94 78 94
5# 96 80 96
6# 100 86 100
7# 103 89 103
8# 106 92 106

Fig.4

Alignment of dressed manikin"

Fig.5

Body normal distance and garment curve"

Fig.6

Eases of waist cross section"

Fig.7

Waist section of different Chest convex angle"

Fig.8

Waist line cross section sketch"

Fig.9

Different ease distribution on waist line of different chest convex angle. (a)Experiment garment of 1#;(b) Experiment garment of 3#; (c)Experiment garment of 5#; (d) Experiment garment of 8#"

Tab.3

Regression equations for different regions"

角度/(°) 回归方程 R2值
0 y=1.019x-4.31α+12.13β+0.277 0.935
30 y=1.021x-6.724α+8.632β-0.897 0.968
60 y=0.907x-5.398α+6.954β+1.12 0.776
120 y=1.371x+8.76α-5.381β-0.32 0.979
150 y=0.312x+6.037α-3.768β-0.75 0.879
180 y=0.899x+5.71α-6.018β+1.03 0.907
[1] 刘正, 李基拓, 陈国栋, 等. 着装间隙量空间形态分布研究及其应用综述[J]. 计算机辅助设计与图形学学报, 2012,24(10):1294-1296.
LIU Zheng, LI Jituo, CHEN Guodong, et al. Review on 3D allocation and its applications in garment design[J]. Journal of Computer-Aided Design & Computer Graphics, 2012,24(10):1294-1296.
[2] ASHDOWN S, LOKER S. Use of body scan data to design sizing systems based on target markets[J]. National Textile Center Annual Report, 2001(11):1-5.
[3] XU J, ZHUANG W, XIAO P. Area ease distribution relationship between the body and garment[J]. J Text Res, 2008,29(5):102-106.
[4] XU J, ZHANG W. Infuential factors of distance ease on typical cross sections[J]. J Text Res, 2009,30(5):104-108.
[5] 张爱萍, 王云仪, 姚怡. 服装胸围截面上距离松量的分配关系[J]. 纺织学报, 2012,33(6):76-80.
ZHANG Aiping, WANG Yunyi, YAO Yi. Study on relationships between garment's distance ease distri-butions at bust section[J]. Journal of Textile Research, 2012,33(6):76-80.
[6] AGNE Lage, KRISTINA Ancutiene. Virtual try-on technologies in the clothing industry: Part 1: investigation of distance ease between body and garment[J]. The Journal of the Textile Institute, 2017,108(10):1787-1793.
doi: 10.1080/00405000.2017.1286701
[7] 于淼, 李俊, 王艺霈. 衣下空间体积与服装面料性能的关联性[J]. 纺织学报, 2012,33(4):100-105.
YU Miao, LI Jun, WANG Yipei. Correlation of fabric performances and space between garment and wearer's skin[J]. Journal of Textile Research, 2012,33(4):100-105.
[8] 孙洁, 倪世明, 叶玲, 等. 基于体表角度的女子体型分类与识别[J]. 浙江理工大学学报, 2013,30(2):184-188.
SUN Jie, NI Shiming, YE Ling, et al. Classification and automatic identification of females'body shape based on body-surface angles[J]. Journal of Zhejiang Sci-Tech University, 2013,30(2):184-188.
[9] 徐继红. 服装廓体松量与面料力学性能相关性及其预测模型的研究[D]. 上海:东华大学, 2008: 45-47.
XU Jihong. Study on correlation between garment ease and material mechanical properties and its producting model[D]. Shanghai: Donghua University, 2008: 45-47.
[10] 王云仪, 张学, 李晓辉, 等. 基于Geomajic软件的燃烧假人衣下空气层特征提取[J]. 纺织学报, 2012,33(11):102-106.
WANG Yunyi, ZHANG Xue, LI Xiaohui, et al. Geomajic-based characteristic extraction of air gap under clothing[J]. Journal of Textile Research, 2012,33(11):102-106.
[11] WANG Z H. Study on the relation between garment style and ease distribution[J]. Journal of Donghua University, 2004,21(6):31-37.
[12] 薛薇. SPSS统计分析方法及应用[M].3版. 北京: 电子工业出版社, 2013, 184-201.
XUE Wei. Spss Statistical Analysis Method and Application[M]. 3th ed. Beijing: Publishing House of Electronics Industry, 2013: 184-201.
[1] DUAN Fangyan, WANG Wenyu, JIN Xin, NIU Jiarong, LIN Tong, ZHU Zhengtao. Research progress in formation of starch fibers and their drug-loaded controlled-release [J]. Journal of Textile Research, 2020, 41(10): 170-177.
[2] DUAN Hongmei, WANG Ximing, HUANG Zixin, GAO Jing, WANG Lu. Construction and drug release properties of fiber-based mesoporous SiO2 drug carrier [J]. Journal of Textile Research, 2020, 41(07): 15-22.
[3] ZHENG Hongfei, WANG Ruiqi, WANG Qing, ZHU Ying, XU Yunhui. Preparation and properties of antibacterial silk fabric modified with oxidized chitosan [J]. Journal of Textile Research, 2020, 41(05): 121-128.
[4] HU Ziting, ZHENG Xiaohui, FENG Mingming, WANG Yingjian, LIU Li, DING Songtao. Influence of air gap on thermal and moisture properties of permeable protective clothing [J]. Journal of Textile Research, 2019, 40(11): 145-150.
[5] BAI Gang, LIU Yanchun, QIAN Hongfei. Preparation of immobilized cross-linked protease aggregate and sanding effect thereof on silk fabric [J]. Journal of Textile Research, 2019, 40(07): 113-118.
[6] MEI Jingxia, ZHANG Nan, WANG Qiang, YUAN Jiugang, FAN Xuerong. Wool anti-felting treatment based on modified protease [J]. Journal of Textile Research, 2019, 40(06): 73-78.
[7] AN Fangfang, FANG Kuanjun, LIU Xiuming, CAI Yuqing, HAN Shuang, YANG Haizhen. Effect of wool fabric protease modification on droplet spreading and color performance [J]. Journal of Textile Research, 2019, 40(06): 58-63.
[8] LI Tao, DU Lei, SUN Jie, ZHANG Yijie, ZOU Fengyuan. Typical cross section silhouette analysis and interval prediction model construction of shorts [J]. Journal of Textile Research, 2019, 40(05): 113-118.
[9] GU Bingfei, YAN Yanhong, SU Junqiang, LIU Guolian. Ease distribution rules of characteristic positions in women's suits [J]. Journal of Textile Research, 2019, 40(05): 107-112.
[10] LIU Fei, LI Qiujin, GONG Jixian, LI Zheng, LIU Xiuming, ZHANG Jianfei. Polysaccharide microcapsules via layer-by-layer assembly for cotton fabric as sustained release vessel [J]. Journal of Textile Research, 2019, 40(02): 114-118.
[11] LIU Laijun, XU Haiyan, ZHAO Fan, WANG Fujun, WANG Lu. Application of UV-Vis spectrophotometry in quantitative monitoring sustained release of 2,3,5-triiodobenzoic acid [J]. Journal of Textile Research, 2019, 40(02): 20-25.
[12] . Biological enzyme combined anti-felting finishing of wool fibers [J]. Journal of Textile Research, 2018, 39(11): 85-90.
[13] . Preparation and slow-release mechanism of Geranium wilfordii Maxim microcapsules-loaded compound fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 138-143.
[14] . Modeling and influence about speed of released-yarn in braiding spindles on yarn tension [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(06): 111-117.
[15] . Anti-crease finishing of ramie fabrics with citric acid and polyol [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(05): 104-109.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd