Journal of Textile Research ›› 2019, Vol. 40 ›› Issue (11): 182-188.doi: 10.13475/j.fzxb.20181201407

• Comprehensive Review • Previous Articles    

Research progress on flatness of garment sewing

XIAO Ping1,2,3, QIAN Bodan1, LU Hong1,2,3(), ZHANG Xianghui1,2,3, ZHANG Yuan1   

  1. 1. College of Fashion and Design, Donghua University, Shanghai 200051, China
    2. Key Laboratory of Clothing Design and Technology, Ministry of Education, Donghua University, Shanghai 200051, China
    3. Shanghai Institute of Design and Innovation, Tongji University, Shanghai 200092, China
  • Received:2018-12-07 Revised:2019-05-20 Online:2019-11-15 Published:2019-11-26
  • Contact: LU Hong E-mail:luhong@dhu.edu.cn

RichHTML

16

PDF (PC)

268

Abstract:

In order to effectively evaluate the quality of sewing flatness of garments, the domestic and foreign clothing appearance evaluation standards and related research were sorted out. From two aspects of fabric performance and sewing conditions, the influence factors of flatness were summerized, and the evaluation methods of sewing flatness were discussed by subjective evaluation and objective evaluation.The influence of the sewing process factors on the flatness was comprehensively analyzed from a multi-factorial perspective. It is necessary to improve the accuracy of the mathematical model between the physical and mechanical properties of the fabric and the sewing wrinkle level of the fabric, improve the flatness prediction model based on the physical properties of the fabric, and seek the study of the flatness of the garment parts of the curved joint. It is proposed to establish a new model for the intelligent evaluation of garment appearance quality, and prospect the research direction of garment sewing flatness from the perspective of garment production and production, which provides a reference for the subsequent study of sewing flatness and garment making.

Key words: clothing appearance quality, sewing flatness, fabric property, sewing condition, flatness evaluation

CLC Number: 

  • TS941.17

Fig.1

Main influencing factors of clothing seaming"

Tab.1

Comparative analysis of national standards and textile industry standards"

标准编号 标准名称 内容 特点 缺陷
GB/T 18132—2016 《丝绸服装》 主要表面缝制部位皱缩按照GSB16—2178丝绸服装缝制起皱5级样照规定 针对口袋、拉链、门襟、下摆,共计25个部位进行缩皱等级规定,各项不得低于4级 未有水洗前、后的缝制褶皱等级规定
GB/T 2660—2017 《衬衫》 1)针对各部位设定不同品类的起皱级别;
2)原料为全棉、全毛、棉/麻混纺时,在原有数值上,降低0.5,丝绸类衬衫不考虑起皱指标		 1)对衬衫各部件设置优等品、一等品、合格品的起皱级别限定;
2)对于洗涤前、洗涤后具有明确的起皱级别规定		 一些易起皱部位如袖窿等,未有明确的起皱级别指标
GB/T 2664—2017 《男西服、大衣》 部件缝制皱缩参照《男西服外观起皱样照》规定 干洗后起皱级别优等品>4级,一等品≥4级,合格品≥3级 无洗涤前起皱级别的规定
GB/T 14272—2011 《羽绒服》 部位缝制皱褶按《羽绒服装外观疵点及缝制起皱五级样照》规定 各部位平整度等级不低于3级 平整度优等品、一等品等无明确等级规定
FZ/T 73056—2016 《针织西服》 针织西服外观平整度、接缝外观平整度参照GB/T 13769、GB/T 13771 外观平整度、缝纫外观平整度、水洗后黏合衬质量有明确的指标要求 无部件的缝制平整度等级的规定
FZ/T 81004—2003 《连衣裙、裙套》 各部位缝制平服、顺直、整齐、牢固 阐述各个部件的缝制质量要求 无明确的起皱级别规定
FZ/T 81006—2017 《牛仔服装》 各部位缝制不平服为轻微缺陷 针对轻缺陷、重缺陷、严重缺陷阐述各个部件的缝制质量要求 无明确的起皱级别规定
FZ/T 81008—2011 《茄克衫》 各部位缝制平服、线路顺直整齐 洗涤干燥后外观平整度,优等品≥3级,其他不考虑;
洗涤干燥后接缝外观质量,优等品≥4级,一等品、合格品≥3级		 无部件的缝制平整度等级的规定
FZ/T 81010—2009 《风衣》 表面部件缝制皱缩按照《男西服外观起皱样照》规定 干洗后起皱级别优等品5级,一等品≥4级,合格品≥3级 无干洗前起皱级别的规定

Fig.2

Objective evaluation method"

[1] MOUSAZADEGAN F, SAHARKHIZ S, LATIFI M, et al. Seam pucker rating by deconvolution residual method[J]. International Journal of Clothing Science and Technology, 2012,25(3):150-170.
[2] 常婷. 大豆蛋白纤维机织面料缝纫平整度的研究[D]. 杭州:浙江理工大学, 2011:5-15.
CHANG Ting. Research on the sewing flatness of soybean protein fiber woven fabric [D]. Hangzhou:Zhejiang Sci-Tech University, 2011:5-15.
[3] SÜLAR V, MESEGÜL C, KEFSIZ H, et al. A comparative study on seam performance of cotton and polyester woven fabrics[J]. Journal of The Textile Institute, 2015,106(1):19-30.
doi: 10.1080/00405000.2014.899079
[4] CHOUDHARY A K, GOEL A. Effect of some fabric and sewing conditions on apparel seam characteristics[J]. Journal of Textiles, DOI: 10.1155/2013/157034.
[5] LIU X S, XING T L, XU D M, et al. Study on novel eco-friendly anti-creasing agents for natural silk fabric[J]. Chinese Chemical Letters, 2012,23(6):665-668.
doi: 10.1016/j.cclet.2012.04.013
[6] KIM H A, KIM S J. Seam pucker and formability of the worsted fabrics[J]. Fibers and Polymers, 2011,12(8):1099-1105.
[7] KAWABATA S, MORI M, NIWA M. An experiment on human sensory measurement and its objective measurement[J]. International Journal of Clothing Science and Technology, 1997,9(3):203-206.
[8] BEHERA B K. Role of fabric properties in the clothing-manufacturing Process[M]// Garment Manufacturing Technology. Oxford: Woodhead Pulishing, 2015: 59-80.
[9] HATI S, DAS B R. Seam pucker in apparels: a critical review of evaluation methods[J]. Asian Journal of Textile, 2011,1(2):60-73.
[10] NASSIF G A A. Effect of weave structure and weft density on the physical and mechanical properties of micro polyester woven fabrics[J]. Life Science Journal, 2012,9(3):1326-1331.
[11] 吴巧英. 薄丝织物缝纫平整度与织物结构及性能的相关性研究[D]. 上海:东华大学, 2013:21-45.
WU Qiaoying. Correlation between the flatness of thin silk fabric sewing and fabric structure and performance[D]. Shanghai: Donghua University, 2013:21-45.
[12] LO W M, HU J L. Shear properties of woven fabrics in various directions[J]. Textile Research Journal, 2002,72(5):383-390.
[13] MUKHOPADHYAY A, SIKKA M, KARMAKAR A K. Impact of laundering on the seam tensile properties of suiting fabrics[J]. International Journal of Clothing Science and Technology, 2004,16(4):394-403.
[14] NAYAK R, PADHYE R, DHAMIJA S, et al. Sewability of air-jet textured sewing threads in denim[J]. Journal of Textile and Apparel Technology and Management (JTATM), 2013,8(1):1-11.
[15] TARAFDAR N, ROY A, SARKAR T. Study of sew ability parameters of different shirting fabrics[J]. Man-made Textiles in India, 2005,48(12):463-467.
[16] 高雪莲, 吴巧英, 武利利. 薄型丝织物结构和性能与缝纫缩皱的关系[J]. 丝绸, 2011,48(3):22-25.
GAO Xuelian, WU Qiaoying, WU Lili. Relationship between structure and properties of thin silk fabrics and sewing wrinkles[J]. Journal of Silk, 2011,48(3):22-25.
[17] 徐麟健. 针织服装缝口缩皱成因分析及解决方法[J]. 针织工业, 2012(1):55-57.
XU Linjian. Analysis and solution of the shrinkage of seams in knitted garments[J]. Knitting Industries, 2012(1):55-57.
[18] EBRAHIM F, FATHY S. Influence of mechanical properties of cotton fabrics on seam quality[J]. Life Science Journal, 2012,9(2):831-836.
doi: 10.1016/0024-3205(70)90339-5
[19] 朱柳静, 吴巧英, 高雪莲. 轻薄丝织物斜向力学性能及缝纫缩皱研究[J]. 丝绸, 2010(3):20-23.
ZHU Liujing, WU Qiaoying, GAO Xuelian. Study on the oblique mechanical properties and sewing shrinkage of lightweight silk fabrics[J]. Journal of Silk, 2010(3):20-23.
[20] JUCIENE M, RADAVICIENE S, SACEVICIENE V, et al. The research on surface non-uniformity of textile systems[J]. International Journal of Clothing Science and Technology, 2016,28(1):36-46.
[21] DOBILAITE V, JUCIENE M. The influence of mechanical properties of sewing threads on seam pucker[J]. International Journal of Clothing Science and Technology, 2006,18(5):335-345.
[22] MOUSAZADEGAN F, LATIFI M. Investigating the relation of fabric’s buckling behaviour and tension seam pucker formation[J]. Journal of The Textile Institute, 2019,110(4):562-574.
[23] NASSIF N A A. Evaluation of seam pucker of woven cotton fabrics using two different methods[J]. Journal of American Science, 2013,9(4):205-210.
[24] MIDHA V K, SURESH K S. Effect of seam angle on seam puckering in lightweight woven fabrics[J]. Journal of The Textile Institute, 2015,106(4):395-401.
doi: 10.1080/00405000.2014.924224
[25] 倪红. 毛精纺面料的缝纫平整度与缝纫条件的关系[J]. 纺织学报, 2008,29(3):80-82,91.
NI Hong. The relationship between sewing flatness and sewing conditions of wool worsted fabrics[J]. Journal of Textile Research, 2008,29(3):80-82,91.
[26] DOBILAITE V, JUCIENE M. Influence of sewing machine parameters on seam pucker[J]. Tekstil, 2007,56(5):286-292.
[27] 顾朝晖, 雒少娜. 针织服装面料缝制工艺参数的确定[J]. 纺织学报, 2015,36(9):94-99.
GU Zhaohui, LUO Shaona. Determination of sewing process parameters of knitted fabrics[J]. Journal of Textile Research, 2015,36(9):94-99.
doi: 10.1177/004051756603600113
[28] PARK C K, HA J Y. A process for optimizing sewing conditions to minimize seam pucker using the Taguchi method[J]. Textile Research Journal, 2005,75(3):245-252.
doi: 10.1177/004051750507500310
[29] STYLIOS G, SOTOMI O J. A neural network approach for the optimization of the sewing process of wool and wool mixture fabrics[C]// Proceedings of 1st China International Wool Textile Conference. Xi'an: China Textile Association, 1994: 689-696.
[30] SHILOH M. The evaluation of seam-puckering[J]. Journal of The Textile Institute, 1971,62(3):176-180.
doi: 10.1080/00405007108630042
[31] GALUSZYNSKI S. Effect of fabric structure on fabric resistance to needle piercing[J]. Textile Research Journal, 1986,56(5):339-340.
doi: 10.1177/004051758605600511
[32] BERTOLDI A, MUNDEN D. The effects of sewing variables on fabric pucker[J]. Clothing Research Journal, 1974,2(1):68-73.
[33] 陈丽丽. 精纺毛织物缝纫平整度客观评价方法[J]. 纺织学报, 2018,39(3):120-125.
CHEN Lili. Objective evaluation method for sewing flatness of worsted wool fabrics[J]. Journal of Textile Research, 2018,39(3):120-125.
[34] MOHRI M, RAVANDI S A H, YOUSSEFI M. Objective evaluation of wrinkled fabric using radon transform[J]. Journal of The Textile Institute, 2005,96(6):365-370.
doi: 10.1533/joti.2004.0066
[35] YANG X B, HUANG X B. Evaluating fabric wrinkle degree with a photometric stereo method[J]. Textile Research Journal, 2003,73(5):451-454.
doi: 10.1177/004051750307300513
[36] KANG T J, CHO D H, KIM S M. New objective evaluation of fabric smoothness appearance[J]. Textile Research Journal, 2001,71(5):446-453.
doi: 10.1177/004051750107100513
[37] XU B, CUMINATO D F, KEYES N M. Evaluating fabric smoothness appearance with a laser profilometer[J]. Textile Research Journal, 1998,68(12):900-906.
doi: 10.1177/004051759806801204
[38] AMIRBAYAT J, ALAGHA M J. Objective assessment of wrinkle recovery by means of laser triangulation[J]. Journal of The Textile Institute, 1996,87(2):349-355.
doi: 10.1080/00405009608659087
[39] KANG T J, KIM S C, SUL I H, et al. Fabric surface roughness evaluation using wavelet-fractal method: part I: wrinkle, smoothness and seam pucker[J]. Textile Research Journal, 2005,75(11):751-760.
[40] KIM M, SUL I H, KIM S. Development of a sewing machine controller for seam pucker reduction using online measurement feedback system[J]. Journal of Engineered Fibers and Fabrics, 2017,12(2):67-72.
[41] 李艳梅, 张渭源. 小波分析在织物缝纫平整度客观评价中的应用[J]. 纺织学报, 2009,30(10):115-119.
LI Yanmei, ZHANG Weiyuan. Application of wavelet analysis in objective evaluation of fabric sewing flat-ness[J]. Journal of Textile Research, 2009,30(10):115-119.
[42] SUN J, YAO M, XU B, et al. Fabric wrinkle characterization and classification using modified wavelet coefficients and support-vector-machine classifiers[J]. Textile Research Journal, 2011,81(9):902-913.
doi: 10.1177/0040517510391702
[43] KOEHL L, MIOU J C, ZENG X. Selecting relevant features from fabric images for automated quality control of seam puker using data analysis and human experts grading[M]// Computational Textile. Berlin: Springer, 2007:39-54.
[44] PAN R, GAO W, LI W, et al. Image analysis for seam-puckering evaluation[J]. Textile Research Journal, 2017,87(20):2513-2523.
doi: 10.1177/0040517516673330
[45] FERNANDO S, JAYAWARDENA T. Measurement of seam puckering and influence of its causes[J]. Journal of Engineering, 2014(4):1-7.
[46] HUI C L, NG S F. Predicting seam performance of commercial woven fabrics using multiple logarithm regression and artificial neural networks[J]. Textile Research Journal, 2009,79(18):1649-1657.
doi: 10.1177/0040517509104758
[47] MARIOLIS I G, DERMATAS E S. Automatic classification of seam pucker images based on ordinal quality grades[J]. Pattern Analysis and Applications, 2013,16(3):447-457.
[48] 张宁, 潘如如, 高卫东. 采用图像处理的织物缝纫平整度自动评估[J]. 纺织学报, 2017,38(4):145-150.
ZHANG Ning, PAN Ruru, GAO Weidong. Automatic evaluation of fabric sewing flatness by image processing[J]. Journal of Textile Research, 2017,38(4):145-150.
[49] PAVLINIĆ D Z, GERŠAK J, DEMŠAR J, et al. Predicting seam appearance quality[J]. Textile Research Journal, 2006,76(3):235-242.
[50] JIANG H, LI J, CHAI Z, et al. Objective assessment for characterising the flatness of garment sewing stitches[J]. Autex Research Journal, 2013,13(4):110-117.
[1] XU Duo, WEI Jiang, MEI Jianxiang, ZHANG Xinling, ZHANG Youqing, XU Weilin, LIU Keshuai. Properties of soft-spun viscose hard-twist yarn and fabric thereof [J]. Journal of Textile Research, 2019, 40(10): 48-55.
[2] . Design and performance of knitted suit fabrics [J]. Journal of Textile Research, 2018, 39(12): 47-52.
[3] . Preparation and performance of transient cool feeling cotton fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(01): 94-97.
[4] . Preparation and properties of conductive polyester coated fabric  [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(10): 78-82.
[5] . Relationship between shape of A-line skirt and properties of fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(6): 88-92.
[6] ZHANG Guang-Zhi, HUANG Xiao-Hua. Wet-on-wet steam flame-retardant finishing of dyed pure cotton canvas [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(5): 86-90.
[7] XU Li-Ping. Factors influencing extensibility  of knitted piping around collar [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(2): 94-97.
[8] . The Research about the Padding-steaming Anti-crease Finish to Cotton Fabric in the Mosit State [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(5): 91-94.
[9] LING Qunmin;TAN Lei. Influence of finishing process on properties of knitted ramie fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(7): 91-96.
[10] LIN Bin;LI Zhe. Influencing factors of drape raised quantity of bubble sleeve [J]. JOURNAL OF TEXTILE RESEARCH, 2009, 30(06): 104-106.
[11] LI Yanmei;ZHANG Weiyuan. Prediction of seam pucker based on grey model [J]. JOURNAL OF TEXTILE RESEARCH, 2008, 29(6): 92-95.
[12] NI Hong. Relationship between seam smoothness and sewing conditions of worsted fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2008, 29(3): 80-82.
[13] XU Liping;CUI Yihua;XUE Yuan. Influences of fabric property and garment construction on bell skirt appearance shape [J]. JOURNAL OF TEXTILE RESEARCH, 2008, 29(1): 91-93.
[14] WU Zhi-ming;WANG Wei-wei. Influence of fabric properties on vertical rising size of overturned collar [J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(9): 51-54.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd