Journal of Textile Research ›› 2020, Vol. 41 ›› Issue (10): 67-73.doi: 10.13475/j.fzxb.20190902007

• Textile Engineering • Previous Articles     Next Articles

Multi-scale simulation of impact failure behavior for 4- and 5-directional 3-D braided composites

FENG Duanpei1,2, SHANG Yuanyuan3, LI Jun1,2()   

  1. 1. College of Fashion and Design, Donghua University, Shanghai 200051, China
    2. Key Laboratory of Clothing Design and Technology (Donghua University), Ministry of Education, Shanghai 200051, China
    3. College of Polymer Science and Engineering, Qingdao University of Science & Technology, Qingdao, Shandong 266042, China
  • Received:2019-09-05 Revised:2020-07-07 Online:2020-10-15 Published:2020-10-27
  • Contact: LI Jun E-mail:lijun@dhu.edu.cn

RichHTML

7

PDF (PC)

154

Abstract:

In order to simulate and predict the complex mechanical characteristics of 3-D braided composites against impact, a multi-scale meso-structure method was used to establish an equivalent combination model of 3-D braided composites to study impact behavior of braided composites. Impact damage evolution, crack propagation and energy absorption were examined numerically. 4- and 5-directional 3-D braided structures were used to prepare braided composites, and the equivalent combination model was established according to the obtained braid parameters. A drop weight impact tester equipped with a high-speed camera was used to record the fracture behavior of the 4-directional 3-D and 5-directional 3-D braided composites under low-speed impact. The 3-D braided composite equivalent combination models were validated by the fracture behavior obtained from the experiments. The simulation results show that under the same volume fraction, the axial yarn exhibits the highest energy absorption. Due to the presence of axial yarns, the 5-directional 3-D braided composites have better crack resistance and crack propagation than the 4-directional 3-D braided composites.

Key words: 3-D braided composite, model construction, impact fracture behavior, specific energy absorption, finite element analysis

CLC Number: 

  • TB332

Fig.1

Spectral slot size"

Tab.1

Specification of composite impact specimen"

纤维类型 结构 编织角
φ/(°)		 纤维体积
分数Vf/%		 试样尺寸
(L×W×H)/mm
T700-12K 三维四向 25.97 36.77 70×14×7
三维五向 23.84 32.19 70×14×7

Fig.2

Hierarchical decomposition of yarns"

Fig.3

Multi-scale braided composite model"

Tab.2

Stiffness parameters of meso-scale model RVEs"

结构 类型 Ez/
GPa		 Ey/
GPa		 Ex/
GPa		 νxx νy νz Gxz/
GPa		 Gyz/
GPa		 Gxy/
GPa
三维四向
 内单胞 24.86 4.73 4.73 0.36 0.36 0.43 8.38 8.38 5.80
面单胞 11.94 3.90 3.94 0.44 0.37 0.39 1.74 1.94 1.32
内单胞 34.18 4.51 4.51 0.33 0.33 0.40 6.53 6.53 3.82
三维五向
 面单胞 11.60 3.58 3.67 0.43 0.36 0.38 1.76 1.66 1.25

Fig.4

Schematic diagram of equivalent combination model"

Fig.5

Finite elements model of impact fracture test"

Fig.6

Impact fracture load-displacement(a) and crack propagation process of 4-directional 3-D(b) and 5-directional 3-D(c) braided composite"

Fig.7

Load-displacement curves of braided composite under impact fracture test obtained through experiment and simulation. (a) 4-directional 3-D bracided composite; (b) 5-directional 3-D braided composites"

Fig.8

Comparison on stress distribution of two kinds of braided composite. (a) Load-displacement curve obtained through simulation; (b) Stress transfer and distributions of braided composites"

Fig.9

Energy proportion of braided composites. (a) Energy absorption; (b) Specific energy absorption by FEM"

[1] 马丕波, 蒋高明, 高哲, 等. 纺织结构复合材料冲击拉伸研究进展[J]. 力学进展, 2013,43(3):329-357.
doi: 10.6052/1000-0992-13-008
MA Pibo, JIANG Gaoming, GAO Zhe, et al. Advances in impact tensile properties of 3-D textile structural composites[J]. Advances in Mechanics, 2013,43(3):329-357.
doi: 10.6052/1000-0992-13-008
[2] 顾伯洪, 孙宝忠. 纺织结构复合材料冲击动力学[M]. 北京: 科学出版社, 2012: 1-39.
GU Bohong, SUN Baozhong. Impact dynamics of textile structural composites [M]. Beijing: Science Press, 2012: 1-39.
[3] 刘丽敏, 孙颖, 李涛涛, 等. 芳纶/炭混编三维编织复合材料冲击后压缩性能实验研究[J]. 固体火箭技术, 2016,39(6):803-808.
LIU Limin, SUN Ying, LI Taotao, et al. Experimental investigation on the compression properties of Kevlar/carbon hybrid 3D braided composites after impact[J]. Journal of Solid Rocket Technology, 2016,39(6):803-808.
[4] 涂莉, 孟家光. 三维纺织复合材料研究进展[J]. 上海纺织科技, 2019,47(6):4-7,24.
TU Li, MENG Jiaguang. Research progress of three-dimensional textile composites[J]. Shanghai Textile Science and Technology, 2019,47(6):4-7,24.
[5] 宋云飞, 杜宇. 三维编织复合材料力学性能研究现状[J]. 玻璃钢/复合材料, 2017(10):104-109.
SONG Yunfei, DU Yu. Research status of mechanical properties of 3D braided composite[J]. Fiber Reinforced Plastics/Composites, 2017(10):104-109.
[6] 张强. 三维角联锁机织复合材料低速冲击力学性能及有限元分析[D]. 上海:东华大学, 2012: 21-55.
ZHANG Qiang. FEM stimulation of three-dimensional angel interlock woven composite under low-velocity impact[D]. Shanghai:Donghua University, 2012: 21-55.
[7] JAJAM K C, TIPPUR H V. Quasi-static and dynamic fracture behavior of particulate polymer composites: a study of nano-vs. micro-size filler and loading-rate effects[J]. Composites Part B:Engineering, 2012,43(8):3467-3481.
doi: 10.1016/j.compositesb.2012.01.042
[8] ZHANG C, CURIEL-SOSA J L, BUI T Q. A novel interface constitutive model for prediction of stiffness and strength in 3D braided composites[J]. Composite Structures, 2017,163:32-43.
doi: 10.1016/j.compstruct.2016.12.042
[9] DONG K, ZHANG J, JIN L, et al. Multi-scale finite element analyses on the thermal conductive behaviors of 3D braided composites[J]. Composite Structures, 2016,143:9-22.
doi: 10.1016/j.compstruct.2016.02.029
[10] GE J, HE C, LIANG J, et al. A coupled elastic-plastic damage model for the mechanical behavior of three-dimensional (3D) braided composites[J]. Composites Science and Technology, 2018,157:86-98.
doi: 10.1016/j.compscitech.2018.01.027
[11] TIAN Z, YAN Y, LI J, et al. Progressive damage and failure analysis of three-dimensional braided composites subjected to biaxial tension and compression[J]. Composite Structures, 2018,185:496-507
doi: 10.1016/j.compstruct.2017.11.041
[12] SHI B, LIU S, SIDDIQUE A, et al. Impact fracture behaviors of three-dimensional braided composite U-notch beam subjected to three-point bending[J]. International Journal of Damage Mechanics, 2018,28(3):404-26.
doi: 10.1177/1056789518772619
[13] ZHANG F, WAN Y, GU B, et al. Impact compressive behavior and failure modes of four-step three-dimensional braided composites-based meso-structure model[J]. International Journal of Damage Mechanics, 2014,24(6):805-827.
doi: 10.1177/1056789514554921
[14] PAN Z X, GU , SUN B Z. Numerical analysis of thermo-mechanical behaviors of 3-D rectangular braided composite under different temperatures[J]. Journal of the Textile Institute, 2015,106(2):173-186
doi: 10.1080/00405000.2014.906941
[15] WU L W, ZHANG F, SUN B Z, et al. Finite element analyses on three-point low-cyclic bending fatigue of 3-D braided composite materials at microstructure level[J]. International Journal of Mechanical Sciences, 2014,84:41-53.
doi: 10.1016/j.ijmecsci.2014.03.036
[16] ZHOU H, HU D, ZHANG W, et al. The transverse impact responses of 3-D braided composite I-beam[J]. Composites Part A Applied Science and Manufactu-ring, 2017,94:158-169.
[17] WANG C, ROY A, CHEN Z, et al. Braided textile composites for sports protection: energy absorption and delamination in impact modelling[J]. Materials & De-sign, 2017,136:258-69.
[18] WANG R, ZHANG L, HU D, et al. Progressive damage simulation in 3D four-directional braided composites considering the jamming-action-induced yarn deformation. Composite Structure[J]. 2017,178:330-340.
[19] 殷冬冬, 车玉秋, 李妍缘. 三维编织方法现状分析[J]. 科技风, 2018(1):109.
YIN Dongdong, CHE Yuqiu, LI Yanyuan. Analysis of the current situation of three-dimensional weaving method[J]. Technology Wind, 2018 (1):109.
[20] 李柏松, 王继辉, 邓京兰. 真空辅助RTM成型技术的研究[J]. 玻璃钢/复合材料, 2001(1):17-18,23.
LI Bosong, WANG Jihui, DENG Jinglan. The research of vacuum assisted RTM forming technology[J]. Fiber Reinforced Plastics/Composites, 2001(1):17-18,23.
[1] DAI Xin, LI Jing, CHEN Chen. Finite element simulation on wear resistance of copper-plated carbon fiber tows [J]. Journal of Textile Research, 2020, 41(06): 27-35.
[2] LIANG Shuangqiang, CHEN Ge, ZHOU Qihong. Compression property of notched 3-D braided composites [J]. Journal of Textile Research, 2020, 41(05): 79-84.
[3] HUANG Yaoli, LÜ Lihua, WANG Guanju. Bending properties of three-dimensional I-shaped woven composites [J]. Journal of Textile Research, 2019, 40(04): 66-71.
[4] . Strain sensing characteristics of carbon nanoyarns embedded in three-dimensional braided composites [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(01): 11-18.
[5] . Modeling analysis on impact damage of 3-D angle-interlock woven composite based on finite element [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(07): 63-68.
[6] . Modeling and experimental study on yarn’s cross-section compression deformation [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(02): 184-190.
[7] . Analysis of impact resistance of core structural reinforcement composite based on finite element analysis [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(08): 62-67.
[8] . Prediction of Elastic Property on 3D Tubular Woven Carbon Fiber Composite [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(9): 56-0.
[9] . Finite element analysis on electric field intensity and distribution during multi-needle electrospinning process [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(6): 1-0.
[10] . Analyzing factors affecting electric field intensity of electrospinning [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(10): 6-0.
[11] . Large torque and smooth transmission system design of raising machine [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(10): 134-140.
[12] . The Static normal force Analysis for double apron draft spinning device [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(4): 123-127.
[13] LIAN jun;GU Bohong. Numerical simulation of dynamic performance of three-dimensional braided composites [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(1): 41-45.
[14] WAN Zhen-kai;WANG Zhan-gang. Research on flaw detection for composite material using ultrasonic testing based on neural network [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(2): 54-59.
[15] WAN Zhenkai;WANG Zhangang. Electrical characteristics of composite material under loading based on SQUID technology [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(1): 58-63.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd