Journal of Textile Research ›› 2021, Vol. 42 ›› Issue (01): 73-77.doi: 10.13475/j.fzxb.20191105906

• Textile Engineering • Previous Articles     Next Articles

3D printing and mechanical properties of glass fiber/photosensitive resin composites

SONG Xing, JIN Xiaoke, ZHU Chengyan, CAI Fengjie, TIAN Wei()   

  1. College of Textile Science and Engineering(International Institute of Silk), Zhejiang Sci-Tech University,Hangzhou, Zhejiang 310018, China
  • Received:2019-11-25 Revised:2020-08-30 Online:2021-01-15 Published:2021-01-21
  • Contact: TIAN Wei E-mail:47151938@qq.com

RichHTML

35

PDF (PC)

176

Abstract:

Aiming at the low strength of light-cured 3D printing resin materials, a method of using glass fiber to reinforce photosensitive resin composites was proposed. The glass fiber and the photosensitive resin were compounded and rapidly fabricated by using the light-cured 3D printing technology. The effects of glass fiber modification and the laying method of glass fiber on the mechanical properties of the composites were studied. The results of the mechanical experiments were analyzed, demonstrating that the glass fiber could enhance the tensile strength and flexural strength of the sample. The glass fiber treated by the silane coupling agent is more significant than the untreated glass fiber for the mechanical properties, and the tensile strength of the sample is increased by 50%, and the bending strength 143%. The effect of the laying method simulating three-dimensional orthogonal structure on mechanical properties of the composites is more significant than the continuous long fiber laying method, and the tensile strength is increased by 110% and the flexural strength 147%.

Key words: glass fiber, photosensitive resin, silane coupling agent, laying method, mechanical property, 3D printing, composite material

CLC Number: 

  • TS195.5

Fig.1

Schematic diagram of 3D printing process of fiber reinforced photosensitive resin composite material"

Fig.2

Diagram of orthogonal structure"

Fig.3

Physical image of orthogonally interwoven glass fiber reinforced composites"

Fig.4

Cross section microstructure of glass fiber reinforced composite. (a) Glass fiber reinforced photosensitive resin; (b) Modified glass fiber reinforced photosensitive resin"

Fig.5

Tensile stress-strain curves of various samples. (a) Modified glass fiber reinforced composites;(b) Orthogonally interwoven glass fiber reinforced composites"

Fig.6

Schematic diagram of KH-550 modification"

Tab.1

Mechanical properties of various samples"

材料 拉伸强度 弯曲强度
测量值/
MPa		 增加百
分率/%		 测量值/
MPa		 增加百
分率/%
纯树脂 6.83 75.39
玻璃纤维增强复合材料 8.06 18 132 42
改性玻璃纤维增强复合材料 10.26 50 183 143
正交玻璃纤维增强复合材料 14.37 110 186 147

Fig.7

Bending stress-strain curves of various sampless"

[1] 宋星, 祝成炎, 田伟, 等. 芳纶增强复合材料波纹夹层3D打印与力学性能研究[J].合成纤维, 2019(2):29-32.
SONG Xing, ZHU Chengyan, TIAN Wei, et al. Study on 3D printing and mechanical properties of aramid reinforced composites corrugated sandwich structure[J].Synthetic Fiber in China, 2019(2):29-32.
[2] 刘飞, 王炜, 李金岳, 等. 3D打印技术在空间飞行器研制中的应用研究[J].航天制造技术, 2018(6):58-62.
LIU Fei, WANG Wei, LI Jinyue, et al. Application research of 3D printing in spacecraft development[J].Aeronautical Manufacturing Technology, 2018(6):58-62.
[3] ATTARAN M. The rise of 3D printing: the advantages of additive manufacturing over traditional manufactu-ring[J]. Business Horizons, 2017,60(5):677-688.
[4] 陈继民, 张成宇, 曾勇, 等. 骨科数字化3D打印技术及应用[J]. 激光与光电子学进展, 2018,55(1):126-134.
CHEN Jimin, ZHANG Chengyu, ZENG Yong, et al. 3D printing technology in orthopedics and its application[J]. Laser & Optoelectronics Progress, 2018,55(1):126-134.
[5] 邓兴泓. 多材料光固化3D打印装置及工艺研究[D]. 哈尔滨:哈尔滨工业大学, 2018: 1-2.
DENG Xinghong. Research on device and process of multi-materials seterolithography[D]. Harbin:Harbin Institute of Technology, 2018: 1-2.
[6] 钟亚洲. 3D打印材料光敏树脂的合成及其改性研究[D]. 广州:广东工业大学, 2018: 3.
ZHONG Yazhou. Study on synthesis and modification of photosensitive resin for 3D printing materials[D]. Guangzhou:Guangdong University of Technology, 2018: 3.
[7] 王蕾. 3D打印材料光敏树脂的改性研究[D]. 武汉:武汉纺织大学, 2015: 9-10.
WANG Lei. Research on modification of photosensitiveresin for 3D printing materials[D]. Wuhan: Wuhan Textile University, 2015: 9-10.
[8] 韩文娟, 黄笔武, 雍涛, 等. 聚氨酯丙烯酸酯作为预聚体的光敏树脂的制备及性能[J]. 南昌大学学报(理科版), 2015,39(4):363-367.
HAN Wenjuan, HUANG Biwu, YONG Tao, et al. Preparation of the photosensitive resin with urethane acrylate as prepolymer and its properties[J]. Journal of Nanchang University(Natural Science Edition), 2015,39(4):363-367.
[9] 权利军. 纤维增强3D打印复合材料的制备及力学性能[D]. 杭州:浙江理工大学, 2016: 7-18.
QUAN Lijun. Preparation and mechanical properties of fiber reinforced 3D printed composites[D].Hangzhou: Zhejiang Sci-Tech University, 2016: 7-18.
[10] 蔡冯杰. 基于3D打印技术的涤纶纤维增强复合材料制备及其力学性能研究[D]. 杭州:浙江理工大学, 2018: 41-43.
CAI Fengjie. Preparation and mechanical properties of polyester fiber reinforced composites based on 3D printing technology[D].Hangzhou: Zhejiang Sci-Tech University, 2018: 41-43.
[11] 孙颖, 刘俊岭, 郑园园, 等. 碳/芳纶混编三维编织复合材料拉伸性能[J]. 纺织学报, 2018,39(2):49-54.
SUN Ying, LIU Junling, ZHENG Yuanyuan, et al. Tensile properties of carbon-aramid hybrid 3D braided composites[J]. Journal of Textile Research, 2018,39(2):49-54.
[12] 孙鹏, 金涛, 田帅, 等. 硅烷偶联剂改性玻璃纤维增强PA6研究[J]. 化工新型材料, 2016,44(1):205-207.
SUN Peng, JIN Tao, TIAN Shuai, et al. Study on reinforcement of PA6 by glass fiber treated with silane coupling agent[J]. New Chemical Materials, 2016,44(1):205-207.
[1] LÜ Qingtao, ZHAO Shibo, DU Peijian, CHEN Li. Research status of fatigue properties characterization and analysis methods of resin matrix composites [J]. Journal of Textile Research, 2021, 42(01): 181-189.
[2] WANG Ximing, CHENG Feng, GAO Jing, WANG Lu. Effect of cross-linking modification on properties of chitosan / polyoxyethylene nanofiber membranes towards wound care [J]. Journal of Textile Research, 2020, 41(12): 31-36.
[3] LIU Shuqiang, WU Jie, WU Gaihong, YIN Xiaolong, LI Fu, ZHANG Man. Surface modification of basalt fiber using nano-SiO2 [J]. Journal of Textile Research, 2020, 41(12): 37-41.
[4] LI Haoyi, XU Hao, CHEN Mingjun, YANG Tao, CHEN Xiaoqing, YAN Hua, YANG Weimin. Research progress of noise reduction by nanofibers [J]. Journal of Textile Research, 2020, 41(11): 168-173.
[5] PANG Yali, MENG Jiayi, LI Xin, ZHANG Qun, CHEN Yankun. Preparation of graphene fibers by wet spinning and fiber characterization [J]. Journal of Textile Research, 2020, 41(09): 1-7.
[6] ZHAN Xiaoqing, LI Fengyan, ZHAO Jian, LI Haiqiong. Thermal mechanical stability of ultrahigh molecular weight polyethylene fiber#br# [J]. Journal of Textile Research, 2020, 41(08): 9-14.
[7] ZHANG Zhuhui, ZHANG Diantang, QIAN Kun, XU Yang, LU Jian. Weaving process and off-axial tensile mechanical properties of wide-angle woven fabric [J]. Journal of Textile Research, 2020, 41(08): 27-31.
[8] LIU Xi, WANG Dong, ZHANG Liping, LI Min, FU Shaohai. Effect of low refractive resin on structure and properties of spun-dyed viscose fibers [J]. Journal of Textile Research, 2020, 41(07): 9-14.
[9] LI Liping, WU Daoyi, ZHAN Yikai, HE Min. Review on carbon fiber surface modification using electrophoretic deposition of carbon nanotubes and graphene oxide [J]. Journal of Textile Research, 2020, 41(06): 168-173.
[10] CHEN Lifu, YU Weidong. Stab resistance of composites with synthetic diamond filled polyimide resin matrix [J]. Journal of Textile Research, 2020, 41(05): 38-44.
[11] LI Peng, WAN Zhenkai, JIA Minrui. Damage monitoring of composite materials based on twist energy of carbon nanotube yarns [J]. Journal of Textile Research, 2020, 41(04): 58-63.
[12] WANG Zongqian, YANG Haiwei, ZHOU Jian, LI Changlong. Effect of urea degumming on mechanical properties of silk fibroin aerogels [J]. Journal of Textile Research, 2020, 41(04): 9-14.
[13] ZHANG Hengyu, ZHANG Xiansheng, XIAO Hong, SHI Meiwu. Research progress of two-dimensional carbide in field of flexible electromagnetic absorbing [J]. Journal of Textile Research, 2020, 41(03): 182-187.
[14] WANG Shixian, JIANG Shuai, LI Mengmeng, LIU Lifang, ZHANG Li. Preparation and characterization of nanocellulose aerogel modified by silane coupling agent [J]. Journal of Textile Research, 2020, 41(03): 33-38.
[15] DING Fang, REN Xuehong. Flame-retardant finishing of polyester fabrics by grafting phosphorus-nitrogen compounds [J]. Journal of Textile Research, 2020, 41(03): 100-105.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd