Journal of Textile Research ›› 2021, Vol. 42 ›› Issue (05): 96-102.doi: 10.13475/j.fzxb.20200707107

• Dyeing and Finishing & Chemicals • Previous Articles     Next Articles

Relationship between Disperse Yellow 6GSL crystal form and thermal stability of its dispersions

WANG Ruifeng1,2, LI Min1,2, TIAN Anli1,2, WANG Chunxia2, FU Shaohai1,2()   

  1. 1. Jiangsu Engineering Research Center for Digital Textile Inkjet Printing, Wuxi, Jiangsu 214122, China
    2. Key Laboratory of Eco-Textiles (Jiangnan University), Ministry of Education, Wuxi, Jiangsu 214122, China
  • Received:2020-07-30 Revised:2021-02-10 Online:2021-05-15 Published:2021-05-20
  • Contact: FU Shaohai E-mail:shaohaifu@hotmail.com

RichHTML

5

PDF (PC)

60

Abstract:

To address the problem of poor stability of ink-jet printing direct ink under high temperature conditions, this study focused on the relationship between the purification solvent and Disperse Yellow 6GSL crystal form. The effects of grinding process conditions on the particle size and grinding efficiency of the dye dispersion were investigated. The relationship between the crystal form of Disperse Yellow 6GSL and the stability and filtration performance of their dispersions under high temperature conditions was investigated. The results show that the purity of the dye filter cake purified by hot water at 60 ℃ is 99.46%, and the mass ratio of Disperse Yellow 6GSL to home made dispersant 4600W is 1∶1.5. Under the condition that the dispersing machine rotation at 2 500 r/min for initial grinding for 5 h and then grinding for 14 h at a speed of 4 000 r/min, the average particle size of the dye dispersion is 90.39 nm. Before and after the dispersion is conditioned at 60 ℃ for 72 h, the filtration flow rates in the polyvinglidene membrane with an absolute pore size of 1 μm are 428 g/min and 333 g/min. The dispersion have good filtration performance and thermal stability.The dispersions can endow high thermal stability of the disperse dye ink with direct ink-jet printing.

Key words: direct ink-jet printing, dye dispersion, purification, crystal form, thermal stability, ink for direct ink-jet printing

CLC Number: 

  • TS194.2

Fig.1

Effect of purification and dissolution on purity of Disperse Yellow 6GSL"

Fig.2

XRD spectra of Disperse Yellow 6GSL obtained by different purification conditions"

Fig.3

SEM images of Disperse Yellow 6GSL obtained by different purification conditions(×10 000)."

Fig.4

Effect of grinding process conditions on dispersion particle size. (a) Dispersant type; (b) Rotation speed; (c)Solvent agent"

Fig.5

Size distribution curves of dye dispersion"

Fig.6

Relationship between solvent agent and thermal stability of dye dispersion"

Fig.7

Filtration performance of dye dispersion. (a) Filtered membranes of dye dispersions; (b) Filtered membranes after dye dispersions placed at 60 ℃ for 72 h"

Fig.8

Thermal stability of dye dispersion viscosity. (a) Effect of temperature on viscosity; (b) Thermal cycle stability of viscosity"

Fig.9

Zeta potential distribution of dye dispersion"

Fig.10

XRD spectra of dye dispersion purifying by hot water before and after grinding"

[1] 林虹, JIN Haiyun. 数码印花与纺织品个性化定制C2B模式[J]. 纺织学报, 2015,36(2):164-168.
LIN Hong, JIN Haiyun. Digital printing and textile personalized customization C2B mode[J]. Journal of Textile Research, 2015,36(2):164-168.
[2] 徐谷仓. 对发展我国数码喷墨印花的看法和建议[J]. 纺织导报, 2015(4):28,30-31.
XU Gucang. Views and suggestions on the development of digital inkjet printing in my country[J]. China Textile Leader, 2015 (4):28,30-31.
[3] 艾丽, 曹红梅, 朱亚伟, 等. 基于液体分散染料的微量印花技术[J]. 纺织学报, 2018,39(9):77-83.
AI Li, CAO Hongmei, ZHU Yawei, et al. Ultralow pollution micro-printing method based on liquid disperse dyes[J]. Journal of Textile Research, 2018,39(9):77-83.
[4] 葛慧德, 王吉祥, 李慧. 一种高温直喷分散色浆:2017100084602[P]. 2017-01-05.
GE Huide, WANG Jixiang, LI Hui. A high temperature direct spray dye dispersion: 2017100084602[P]. 2017-01-05.
[5] ZHAO Ying, LI Min, ZHANG Liping, et al. Influence of diffusion behavior ofdisperse dye ink on printing accuracyfor warp-knitted polyester fabrics[J]. Textile Research Journal, 2019,89(2):162-171.
doi: 10.1177/0040517517741158
[6] 楚善润, 张悦, 邢铁玲, 等. 涤/棉织物喷墨印花用分散红/活性红染料墨水的制备[J]. 印染, 2020,46(7):1-5,15.
CHU Shanrun, ZHANG Yue, XING Tieling, et al. Preparation of disperse red/reactive red ink for ink jet printing of T/C fabric[J]. China Dyeing & Finishing, 2020,46(7):1-5,15.
[7] 秦国胜, 王齐振, 孙志国, 等. 一种水性纳米数码印花直喷墨水、生产工艺及打印方法: 107904984A[P]. 2017-12-28.
QIN Guosheng, WANG Qizhen, SUN Zhiguo, et al. Water-based nano digital printing direct inkjet,production process and printing method:107904984A[P]. 2017-12-28.
[8] 谢强, 罗荣, 邱伟伟. 高温分散直喷黑色墨水及其制备方法: 110358364 A[P]. 2019-08-15.
XIE Qiang, LUO Rong, QIU Weiwei. High temperature dispersion direct injection black ink and its preparation method: 110358364 A[P]. 2019-08-15.
[9] 赵涛. 染整工艺与原理:下[M]. 北京: 中国纺织出版社, 2009: 174-175.
ZHAO Tao. Dyeing and finishing technology and principle: Ⅱ[M]. Beijing: China Textile & Apparel Press, 2009: 174-175.
[10] CHU Runshan, ZHANG Yue, XING Tieling, et al. The stability of disperse red/reactive-red dye inks[J]. RSC Advances, 2020,10(70):42633-42643.
doi: 10.1039/D0RA07333D
[11] 梁静, 钟毅, 毛志平, 等. 晶型对分散染料染色性能的影响[J]. 纺织学报, 2018,39(7):69-73.
LIANG Jing, ZHONG Yi, MAO Zhiping, et al. Effect of crystal form on the dyeing performance of disperse dyes[J]. Journal of Textile Research, 2018,39(7):69-73.
[12] 冯欢, 王祥荣. 分散剂对液状分散橙30性能的影响[J]. 印染助剂, 2016,33(8):52-56.
FENG Huan, WANG Xiangrong. Effect of dispersant on the properties of the liquid disperse orange 30[J]. Textile Auxiliaries, 2016,33(8):52-56.
[13] 艾丽, 朱亚伟. 液体分散染料的技术进步及应用[J]. 印染, 2019,45(24):47-52.
AI Li, ZHU Yawei. The development of liquid disperse dye and its application[J]. China Dyeing & Finishing, 2019,45(24):47-52.
[14] QIAN Tao, ZHONG Yi, MAO Zhiping, et al. The comb-like modified styrene-maleic anhydride copolymer dispersant for disperse dyes[J]. Journal of Applied Polymer Science, 2019,136(16):47330.
doi: 10.1002/app.v136.16
[15] 罗孝勇, 付少海, 王春霞, 等. 超细分散染料的制备及影响转移印花效果的因素[J]. 纺织学报, 2012,33(11):86-90.
LUO Xiaoyong, FU Shaohai, WANG Chunxia, et al. Preparation of ultrafine disperse dye and influence factors on transfer printing effect[J]. Journal of Textile Research, 2012,33(11):86-90.
[16] 刘媛媛, 钟毅, 徐红, 等. 液体分散染料的超细化制备工艺[J]. 印染, 2021,47(1):6-10.
LIU Yuanyuan, ZHONG Yi, XU Hong, et al. Ultrafine preparation of liquid disperse dyestuff[J]. China Dyeing & Finishing, 2021,47(1):6-10.
[17] YOON Chun, CHOI Jae Hong. Synjournaling polymeric dispersants to apply to carbon black pigmented mill bases for use in ink-jet inks[J]. Coloration Technology, 2020,136(1):60-74.
doi: 10.1111/cote.12446
[18] 张曙光. 液状超细染料的性能研究[D]. 无锡:江南大学, 2007: 22-25.
ZHANG Shuguang. Study on the performance of liquid ultrafine dyes[D]. Wuxi:Jiangnan University, 2007: 22-25.
[19] 齐宝坤, 赵城彬, 江连洲, 等. 不同热处理温度下大豆11S球蛋白Zeta电位、粒径和红外光谱分析[J]. 食品科学, 2018,39(24):54-58.
QI Baokun, ZHAO Chengbin, JIANG Lianzhou, et al. Analysis of zeta potential, particle size and infrared spectroscopy of 11S glycinin at different heat treatment temperatures[J]. Food Scienct, 2018,39(24):54-58.
[20] 何永峰. 分散染料碱性染色与印花及糊料流变性研究[D]. 上海:东华大学, 2016: 53-54.
HE Yongfeng. Studies on alkaline dyeing and printing of disperse dyees a rheological properties of paste[D]. Shanghai: Donghua University, 2016: 53-54.
[21] FU Shaohai, ZHANG Guifang, DU Changsen, et al. Preparation of encapsulated disperse dye dispersion for polyester inkjet printing ink[J]. Journal of Applied Polymer Science, 2011,121(3):1616-1621.
doi: 10.1002/app.33728
[1] YANG Tingting, GAO Yuanbo, ZHENG Yi, WANG Xueli, HE Yong. Thermal degradation kinetics and pyrolysis products of bio-based polyamide 56 fiber [J]. Journal of Textile Research, 2021, 42(04): 1-7.
[2] WEN Xin, ZHANG Xuzhen, LI Yong, HUANG Wenjian, LU Chen. Study on water-initiated ring-opening polymerization technology of L-lactide [J]. Journal of Textile Research, 2020, 41(12): 21-25.
[3] ZHAN Xiaoqing, LI Fengyan, ZHAO Jian, LI Haiqiong. Thermal mechanical stability of ultrahigh molecular weight polyethylene fiber [J]. Journal of Textile Research, 2020, 41(08): 9-14.
[4] ZHU Weiwei, CAI Chong, ZHANG Cong, LONG Jiajie, SHI Meiwu. Effect of supercritical CO2 treatment temperature on structure and property of diacetate fiber [J]. Journal of Textile Research, 2020, 41(03): 8-14.
[5] LI Fu, LIU Shuqiang, FEI Pengfei, ZHANG Man, WU Gaihong. Recent progress in differentiated polyacrylonitrile fiber and their applications in environmental purification [J]. Journal of Textile Research, 2020, 41(02): 155-164.
[6] . Preparation and properties of novel modified polyester [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 22-26.
[7] . Effect of crystal form on dyeing behavior of disperse dyes [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(07): 69-73.
[8] . Influence of flame retardant finishing with silicon-phosphorus hybridization on the structure and thermal stability of wool fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(12): 101-105.
[9] . Oxidation resistance and thermal stability of fatty acid esters lubricant agent in spinning oil [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(04): 68-72.
[10] . Preparation and characterization of low melting point polyamide [J]. Journal of Textile Research, 2016, 37(3): 6-10.
[11] . Modification of poly (3-hydroxybutyrate-co-4-hydroxybutyrate) by epoxy-based chain extenders [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(8): 139-0.
[12] . Influence of oligomer contents on melt spinning process of poly (lactic acid) [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(8): 133-0.
[13] . Morphology and photocatalytic properties of titanium sol prepared by sol-gel method [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(5): 7-0.
[14] . Effect of UV irradiation on structure and properties of cotton fibers [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(3): 52-0.
[15] . Structure and electric conductive heating performance of silver-plated filament knitted fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(10): 52-0.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd