Journal of Textile Research ›› 2022, Vol. 43 ›› Issue (08): 147-152.doi: 10.13475/j.fzxb.20210802506

• Apparel Engineering • Previous Articles     Next Articles

Research on virtual display of fully-formed double-layerknitted clothing parts

ZHAN Biqin, LI Yuxian, DONG Zhijia, CONG Honglian()   

  1. Engineering Research Center for Knitting Technology, Ministry of Education, Jiangnan University, Wuxi, Jiangsu 214122, China
  • Received:2021-08-02 Revised:2022-04-28 Online:2022-08-15 Published:2022-08-24
  • Contact: CONG Honglian E-mail:cong-wkrc@163.com

RichHTML

10

PDF (PC)

148

Abstract:

In order to develop double-layer fully-formed knitted clothing with high quality real-time virtual display, the parametric design of the double-layer template model after component classification was carried out based on the analysis of the characteristic elements of the special-shaped structure template model of fully-formed double-layer clothing. The topological geometric mapping relationship between two-dimensional template and three-dimensional plate model was established, and the three-dimensional component modeling of inner and outer two-dimensional template was achieved by using spring mass model. Through the use of digital yarn simulation and texture mapping technology, the structural feature points of the two-dimensional plate after texture mapping were calibrated and aligned, and the virtual modeling design and rapid virtual simulation display of seamless parts of fully-formed double-layer knitted clothing were realized. This work provides an innovative scheme for the development and rapid interaction of series products of fully-formed special-shaped knitted clothing.

Key words: fully-formed, knitted clothing, double-layer structure, componentization, texture design, virtual display

CLC Number: 

  • TS195.644

Fig.1

Segment fitting diagram of C-shaped curve (a) and S-shaped curve(b)"

Fig.2

Parametric design of full-formed typical double-layer knitted clothing parts. (a) Topsversion; (b) Bottoms version"

Fig.3

Comparison of fineness of triangular meshing under different particle spacing"

Fig.4

Transformation of 2-D template to 3-D surface under spring-particle model. (a) Spring-particle model principle; (b) Transformation diagram of 3-D surface of inner and outer templates"

Fig.5

Image of adaptive fusion of typical two-layer structure upper parts"

Fig.6

Yarn digital simulation diagram. (a) Double strand wool yarn; (b) Mohair yarn; (c) Metallic yarn; (d) Mixed fancy yarn; (e) Seersucker; (f) Loop yarn"

Fig.7

Texture organization simulation process"

Fig.8

Pattern contraption process. (a) Starting and ending points of pattern counterpoint; (b)Transformation of particle coordinates; (c)Schematic diagram of coil pattern alignment"

Fig.9

Simulation figure of fully formed double-layer structure clothing effect. (a) Effect of different yarn styles; (b) Effect of different organization pattern; (c) Effect of different styles"

[1] HYUN D E, YOON S H, KIM M S, et al. Modeling and deformation of arms and legs based on ellipsoidal sweeping[C]//Conference on Computer Graphics & Applications. Alta: IEEE Computer Society, 2003: 204-212.
[2] KANG M K, LEE J. A real-time cloth draping simulation algorithm using conjugate harmonic functions[J]. Computers & Graphics, 2007, 31(2): 271-279.
doi: 10.1016/j.cag.2006.09.010
[3] ANGUELOV D, SRINIVASAN P, KOLLER D, et al. Scape: shape completion and animation of people[J]. ACM, 2005(24): 408-416.
[4] VOLINO P, CORDIER F, MAGNENAT-THALMAN N. From early virtual garment simulation to interactive fashion design[J]. Computer-Aided Design, 2005, 37(6): 593-608.
doi: 10.1016/j.cad.2004.09.003
[5] HILLESLAND K E, HENSLEY J. Implicit texture map parameterization for GPU rendering: US 20140333621 A1[P]. 2017-04-18.
[6] TANG M, LIU Z, TONG R, et al. I-Cloth: incremental collision handling for GPU-based interactive cloth simulation[C]//SIGGRAPH Asia 2018 Technical Papers. Tokyo: ACM, 2018: 204.
[7] LUO X, GUO F, LIU X, et al. The research of anti collision algorithm in the clothing identification based on RFID[C]//2015 International Industrial Informatics and Computer Engineering Conference. Suzhou: Atlantis Press, 2015: 1312-1315.
[8] BUFFET T, ROHMER D, BARTHE L, et al. Implicit untangling: a robust solution for modeling layered clothing[J]. ACM Transactions on Graphics, 2019, 38(4), 1-12.
[9] 罗璇, 彭佳佳, 蒋高明, 等. 全成形毛衫样板设计及成形方法[J]. 纺织学报, 2018, 39(7): 105-110.
LUO Xuan, PENG Jiajia, JIANG Gaoming, et al. Design and knitting shaping method of fully-fashioned knitwear[J]. Journal of Textile Research, 2018, 39(7): 105-110.
[10] 罗璇. 基于参数模型的羊毛衫虚拟展示研究[D]. 无锡: 江南大学, 2019: 25-30.
LUO Xuan. Research the virtual display of sweater based on the parameter model[D]. Wuxi: Jiangnan University, 2019: 25-30.
[11] 彭佳佳. 基于线圈结构的全成形毛衫三维仿真[D]. 无锡: 江南大学, 2020: 33-39.
PENG Jiajia. 3D simulation for complete knitwear based on loop structure[D]. Wuxi: Jiangnan University, 2020: 33-39.
[12] 陈咪, 叶勤文, 张皋鹏. 斜裁裙参数化结构模型的构建[J]. 纺织学报, 2020, 41(7): 135-140.
CHEN Mi, YE Qinwen, ZHANG Gaopeng. Construction of parametric structure model for bias-cut skirt pat-tern[J]. Journal of Textile Research, 2020, 41(7): 135-140.
[13] 靳彬. 人体上的三维服装面料动态仿真技术研究[D]. 西安: 西安电子科技大学, 2007: 13-16.
JIN Bin. Research on dynamic simulation technology of 3D garment fabric on human body[D]. Xi'an: Xidian University, 2007: 13-16.
[14] SONG K, ZHANG W Y. Approximation of the apparel construction curves with bezier curves[J]. Melliand China, 2001(4): 76-79.
[15] LIU Q, XI J, WU Z. An energy-based surface flattening method for flat pattern development of sheet metal components[J]. International Journal of Advanced Manufacturing Technology, 2013, 68(5-8): 1155-1166.
doi: 10.1007/s00170-013-4908-y
[1] ZHANG Meng, ZHOU Jiu. Design principle and method of double-layer full-color structure with central weft stitching [J]. Journal of Textile Research, 2022, 43(03): 83-88.
[2] ZOU Ya'nan, XIA Fenglin, DONG Zhijia, HUANG Mengting, CHU Kaiyuan. Structural design and implementation of warp-knitted fully-formed neck sleeves [J]. Journal of Textile Research, 2021, 42(12): 76-80.
[3] JIANG Hongxia, HUANG Zhiwei, LIU Jihong. Virtual display of cheongsam based on modularization [J]. Journal of Textile Research, 2021, 42(05): 138-142.
[4] SONG Ying. Interactive design of cheongsam personalized customization and display system [J]. Journal of Textile Research, 2021, 42(04): 144-148.
[5] ZHAN Biqin, CONG Honglian, WU Guangjun. Research and application of process modeling of single-piece double-layer knitted garments [J]. Journal of Textile Research, 2021, 42(03): 149-154.
[6] LIU Haisang, JIANG Gaoming, DONG Zhijia. Simulation and virtual display for few-guide bar yarn dyed fabric based Web [J]. Journal of Textile Research, 2021, 42(02): 87-92.
[7] ZHANG Zhuo, CONG Honglian, JIANG Gaoming, DONG Zhijia. Polo shirt rapid style recommendation system based on interactive genetic algorithm [J]. Journal of Textile Research, 2021, 42(01): 138-144.
[8] PAN Bo, ZHONG Yueqi. Image-based three-dimensional garment reconstruction [J]. Journal of Textile Research, 2020, 41(04): 123-128.
[9] WANG Sheng;LI Yuling;LI Gang;CHEN Xuwei. Research on manufacture of double-layer bifurcated woven artificial blood vessel [J]. JOURNAL OF TEXTILE RESEARCH, 2009, 30(05): 38-42.
[10] PENG Fubing;JIAO Xiaoning;SHA Ren. New spunlaced composite substrate for cosmetic mask [J]. JOURNAL OF TEXTILE RESEARCH, 2007, 28(12): 51-53.
[11] Design and realization of long-distance virtual display system for fabric. Design and realization of long-distance virtual display system for fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(4): 137-138.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd