Journal of Textile Research ›› 2022, Vol. 43 ›› Issue (10): 141-147.doi: 10.13475/j.fzxb.20210809207

• Apparel Engineering • Previous Articles     Next Articles

Application of paper pattern technology in knitting process of fully formed inclined skirt

XU Yanhua(), YUAN Xinlin   

  1. School of Art and Design, Changzhou University, Changzhou, Jiangsu 213164, China
  • Received:2021-08-24 Revised:2022-06-24 Online:2022-10-15 Published:2022-10-28

RichHTML

7

PDF (PC)

44

Abstract:

In order to tackle the large error between the size of the fully formed inclined skirt sample and the customer's requirements, the fully formed panels structure, knitting process and the causes of the size error were analyzed. The paper pattern technology used for woven garments is applied to the pattern drawing and the arc length acquisition of the waist and hem for the fully formed inclined skirt. The pattern was drawn by fan-shaped cutting-spreading method and arbitrary angle fan-ring method. The arc length was obtained by the paper pattern cutting-moving method and the fan-ring arc length calculation method. The comparisons between the two types of paper patterns and between the two arcs lengths were carried out. A direct theoretical calculation method that is more suitable for the acquisition of the arc length was deduced. The results show that the combination of fan-shaped cutting-spreading method and paper pattern cutting-moving method can be used to obtain the accurate arc length, while the combination of arbitrary angle fan-ring method and fan-ring arc length calculation method can directly calculate the arc length without complex and cumbersome paper pattern drawing, cutting and moving. The sampling time is shortened and the efficiency is improved.

Key words: paper pattern technology, fully formed garment, inclined skirt, knitting process, panels technology

CLC Number: 

  • TS184.5

Fig.1

Style of fully formed skirt"

Tab.1

Specification of fully formed skirt"

参数 参数编号 尺寸/cm
裙长 ① 80
腰宽 ② 32
下摆宽 ③ 125
腰口高 ④ 5
下摆高 ⑤ 5

Tab.2

Structure and density of skirt"

部位 组织 横密/
(纵行·(10 cm)-1)		 纵密/
(横列·(10 cm)-1)
裙身 1+1正反针 70.7 121
下摆 1+1正反针+移圈 121
腰口 1+1罗纹 122

Fig.2

Skirt hem and piece angle of skirt"

Fig.3

Structure and measuring position of fully formed inclined skirt"

Fig.4

Diagram of panels to skirt. (a) Structure of panels; (b) Structure of skirt"

Fig.5

Fan-shaped cutting-spreading method. (a) Step 1; (b) Step 2; (c) Step 3; (d) Step 4; (e) Step 5"

Fig.6

Arbitrary angle fan-ring method. (a) Step 1; (b) Step 2; (c) Step 3; (d) Step 4"

Fig.7

Comparison of paper patterns"

Fig.8

Paper pattern cutting-moving method. (a) Cutting of patterns; (b) Moving of hem arc; (c) Moving of waist arc"

Fig.9

Fan-ring arc length calculation method"

Tab.3

Comparison of arc lengths"

弧线名称 弧线长度/cm 相对误
差/%
纸样剪移法 扇环弧长计算法
腰口弧线 33.7 33.85 0.45
下摆弧线 133.9 134.16 0.19

Fig.10

Fully formed inclined skirt. (a) Front; (b) Back"

[1] 王敏, 丛洪莲, 蒋高明, 等. 四针床电脑横机的全成形工艺[J]. 纺织学报, 2017, 38(4): 62-63.
WANG Min, CONG Honglian, JIANG Gaoming, et al. Whole garment knitting process on four-bed computerized flat knitting machine[J]. Journal of Textile Research, 2017, 38(4): 62-63.
[2] 罗晓菊. 一体成型技术在服装中的应用与发展[J]. 现代纺织技术, 2019, 27(3): 56-61.
LUO Xiaoju. Application and development of integrated molding technologies in garment production.[J]. Advanced Textile Technology, 2019, 27(3): 56-61.
[3] 罗璇, 彭佳佳, 蒋高明, 等. 全成形毛衫样板设计及成形方法[J]. 纺织学报, 2018, 39(7): 105-110.
LUO Xuan, PENG Jiajia, JIANG Gaoming, et al. Design and knitting shaping method of fully-fashioned knit-wear[J]. Journal of Textile Research, 2018, 39(7): 105-110.
[4] 刘博, 丛洪莲. 四针床全成形休闲西服的工艺设计与成形原理[J]. 纺织学报, 2020, 41(4): 129-134.
LIU Bo, CONG Honglian. Process design and knitting principle of one-piece casual suits based on four-needle-bed flat knitting machine[J]. Journal of Textile Research, 2020, 41(4): 129-134.
[5] 刘博, 丛洪莲. 全成形西服横向编织技术的工艺模型与实现[J]. 纺织学报, 2020, 41(7): 53-58.
LIU Bo, CONG Honglian. Research and implementation of flat-bed knitting process model of fully formed suit[J]. Journal of Textile Research, 2020, 41(7): 53-58.
[6] 詹必钦, 丛洪莲, 吴光军. 全成形双层结构针织服装工艺模型研究与应用[J]. 纺织学报, 2021, 42(3): 149- 154, 160.
ZHAN Biqin, CONG Honglian, WU Guangjun. Research and application of process modeling of single-piece double-layer knitted garments[J]. Journal of Textile Research, 2021, 42(3): 149-154, 160.
[7] 任春. 裙子造型结构设计研究[J]. 纺织导报, 2014(2): 74-77.
REN Chun. Structural design of skirt shape[J]. China Textile Leader, 2014(2): 74-77.
[8] 刘博, 丛洪莲, 吴光军. 绢丝/羊绒混纺全成形针织服装的设计和开发[J]. 丝绸, 2020, 57(9): 114-119.
LIU Bo, CONG Honglian, WU Guangjun. Design and development of fully-formed garment based on silk/cashmere blend yarn[J]. Journal of Silk, 2020, 57(9): 114-119.
[9] 邱庄岩, 吴志明. 全成形毛衫接片工艺及应用[J]. 上海纺织科技, 2018, 46(7): 43-47.
QIU Zhuangyan, WU Zhiming. Panels technology and application of whole garment[J]. Shanghai Textile Science & Technology, 2018, 46(7): 43-47.
[10] 郑兴昱, 袁蓉. 基于针织全成形电脑横机智能技术的应用设计[J]. 上海纺织科技, 2019, 47(1): 1-5.
ZHENG Xingyu, YUAN Rong. Application design of intelligent manufacturing technology based on computerized knitting machine[J]. Shanghai Textile Science & Technology, 2019, 47(1): 1-5.
[11] 王莹莹, 王盼, 任婧媛. 全成形典型针织半身裙设计与成形工艺研究[J]. 丝绸, 2020, 57(11): 126-130.
WANG Yingying, WANG Pan, REN Jingyuan. Research on design and forming process of fully formed typical knitted skirt[J]. Journal of Silk, 2020, 57(11): 126-130.
[12] 徐利平, 崔毅华, 薛元. 织物性能与服装结构对喇叭裙外观形态的影响[J]. 纺织学报, 2008, 29(1): 91-93.
XU Liping, CUI Yihua, XUE Yuan. Influences of fabric property and garment construction on bell skirt appearance shape[J]. Journal of Textile Research, 2008, 29(1): 91-93.
[13] 李雅, 王建萍. 裙摆大小与侧缝偏移量关系研究[J]. 纺织科技进展, 2012(4): 86-89.
LI Ya, WANG Jianping. Study on the relationship between hem size and side seam offset[J]. Progress in Textile Science & Technology, 2012(4): 86-89.
[14] 王晓霞, 戴建国, 王春霞, 等. 青年女性体表角度分析[J]. 纺织学报, 2013, 34(7): 106-110.
WANG Xiaoxia, DAI Jianguo, WANG Chunxia, et al. Analyzing body shape of young women by use of body surface angles[J]. Journal of Textile Research, 2013, 34(7): 106-110.
[15] 卢致文, 牛梅. 基于纸样的毛衫装袖工艺计算方法[J]. 毛纺科技, 2017, 45(10): 12-16.
LU Zhiwen, NIU Mei. Study on the process calculation method of sweater sleeve based on paper pattern[J]. Wool Textile Journal, 2017, 45(10): 12-16.
[16] 张小雪, 王佳乐, 刘洋. 几种典型半身裙原型结构平衡的比较[J]. 国际纺织导报, 2020(6): 50-54.
ZHANG Xiaoxue, WANG Jiale, LIU Yang. Comparative research of the balance of typical skirt prototypes[J]. Melliand China, 2020(6): 50-54.
[17] 刘治君, 胡毅, 阳川. 波浪裙结构设计解析[J]. 纺织导报, 2014(7): 121-124.
LIU Zhijun, HU Yi, YANG Chuan. Research on the design of poodle skirt construction[J]. China Textile Leader, 2014(7): 121-124.
[18] 李健, 郑嵘, 蔡妮, 等. 斜裙形态与人体腰臀部形态的关系[J]. 北京服装学院学报(自然科学版), 2005, 25(4): 1-8.
LI Jian, ZHENG Rong, CAI Ni, et al. Relationship between the skirt shape and the waist-hip shape of human body[J]. Journal of Beijing Institute of Fashion Technology(Natural Science Edition), 2005, 25(4): 1-8.
[19] 赵媛媛, 王革辉. 喇叭裙丝绺方向及裙片数对造型效果的影响[J]. 西安工程大学学报, 2013, 27(5): 595-601.
ZHAO Yuanyuan, WANG Gehui. Effects of grain directions of fabrics and the number of skirt pieces on flared skirt appearance shape[J]. Journal of Xi'an Polytechnic University, 2013, 27(5): 595-601.
[1] LU Lisha, JIANG Gaoming. Methods for converting 3-D styles to 2-D patterns for fully formed garments [J]. Journal of Textile Research, 2022, 43(10): 133-140.
[2] CHEN Xi, MIAO Xuhong, LIU Qing, DONG Zhijia. Knitting process design of fully-fashioned Y-shaped three-way pipe fabrics [J]. Journal of Textile Research, 2021, 42(05): 73-78.
[3] ZHAN Biqin, CONG Honglian, WU Guangjun. Research and application of process modeling of single-piece double-layer knitted garments [J]. Journal of Textile Research, 2021, 42(03): 149-154.
[4] ZHAO Boyu, LIANG Xinhua, CONG Honglian. Structural modeling and process practice of three-dimensional fully fashioned face masks woven by computerized flat knitting machine [J]. Journal of Textile Research, 2020, 41(12): 59-65.
[5] DAI Ning, PENG Laihu, HU Xudong, CUI Ying, ZHONG Yaosen, WANG Yuefeng. Natural frequency characterization based on Euler-Bernoulli beam theory on knitting seamless underwear [J]. Journal of Textile Research, 2020, 41(12): 144-150.
[6] LU Lisha, JIANG Gaoming, LUO Xuan. Knitting process and properties analysis of underarm stitching of fully-fashioned garment [J]. Journal of Textile Research, 2019, 40(02): 69-75.
[7] . Application of paper pattern technology in knitting process of unconventional wool knitted apparel style [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(08): 107-113.
[8] . Application of paper folding and molding in pattern desing of sweater [J]. Journal of Textile Research, 2016, 37(05): 110-116.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd