Journal of Textile Research ›› 2023, Vol. 44 ›› Issue (02): 96-102.doi: 10.13475/j.fzxb.20220104307

• Textile Engineering • Previous Articles     Next Articles

Construction of flexible electronic fabric and its pressure sensing performance

LI Ganghua, WANG Hang, SHI Baohui, QU Lijun, TIAN Mingwei()   

  1. College of Textiles & Clothing, Qingdao University, Qingdao, Shandong 266071, China
  • Received:2022-01-18 Revised:2022-06-30 Online:2023-02-15 Published:2023-03-07

Abstract:

Objective With the development of artificial intelligence, wearable technology has become a research hotspot, driving the rapid development of all types of sensors. Sensors used in wearable devices should not only have sensitive and stable sensing performance, but should also have excellent flexibility, air permeability, and integration with textiles. Polymer based flexible pressure sensors have significant advantages in flexibility and integration with textiles, and have been developed rapidly. However, most of these sensors are thin films or gel shaped, which seriously affects their breathability and wearing comfort.
Method Aiming at the problems of poor air permeability, poor moisture permeability and low wearing comfort of film-based and gel-based flexible sensors, a preparation strategy of all-textile-based flexible electronic fabrics based on piezoresistive effect was proposed. A structural model was constructed based on the electrode layer of 1+1 rib conductive fabric and the middle conductive layer of MXene modified cotton fabric (as shown in Fig. 1-3). The flexible electronic fabric with sandwich structure was formed by sewing and compounding various functional layers, and its wearing comfort and sensing performance were studied. Furthermore, its potential for industrial production in the future was expounded.
Results The sensitivity of the flexible electronic fabric in the low pressure range (0-3 kPa) is about 0.409 5 kPa-1 (as shown in Fig. 4), which is caused by the working mechanism of the piezoresistive flexible sensor. A 2 g weight can make resistance change rate of the flexible electronic fabric exceed 3% (as shown in Fig. 6), which is mainly due to the excellent mechanical properties of the 1+1 ribbed conductive fabric. This enables the flexible electronic fabric to achieve large deformation under small external forces, resulting in rapid changes in resistance values to achieve excellent responsiveness. In addition, the MXene modification of cotton fabrics also gives the flexible electronic fabric a lower minimum pressure detection limit and better low-pressure monitoring performance. The response time of the flexible electronic fabric is less than 50 ms as Fig. 5 shows, sufficient for human motion signal monitoring. The stable resistance changes were maintained after 8 000 pressure cycles, indicating that the flexible electronic fabric maintains good resilience and conductive material wear resis-tance(Fig. 8). In addition, thanks to the full textile configuration of the flexible electronic fabric, it has better air permeability of 270.49 mm/s and moisture permeability of 3 420 g/(m2·24 h), representing better comfort. The flexible electronic fabric can realize the dynamic monitoring of the object, and it is convenient to predict the size and weight of the object qualitatively according to the image size and color depth as illustrated in Fig. 11. The flexible electronic fabric has excellent recognition ability for human body dynamic signals (as shown in Fig.12).
Conclusion This paper introduces a flexible electronic fabric with piezoresistive effect, which is composed of 1+1 ribbed conductive fabric and MXene modified cotton fabric. It has high sensitivity, fast response and excellent cycle durability. It is able to sense, record and distinguish the pressure of human movement, and achieve dynamic monitoring. On the basis of meeting the sensing requirements, the composition of the whole fabric can meet the needs of thermal-moist comfort and contact comfort of the human body. It has the potential to achieve large-scale industrial production due to its easy preparation process and stable performance, and has broad application prospects in the fields of sports training, medical care and military protection. In the future, the accuracy, sustainability, interactivity and data analysis and feedback of intelligent textiles need be further studied to meet the needs of the end-users with improved behavior.

Key words: all-textile-based, flexible piezoresistive sensor, electronic fabric, sensing performance, MXene

CLC Number: 

  • TM242

Fig.1

Schematic diagram of structure of flexible electronic fabric. (a) Schematic diagram of structure; (b) Schematic diagram of monitoring unit; (c) Weaving diagram of ribbed fabric; (d) Loop schematic diagram of ribbed fabric"

Fig.2

SEM images of cotton fabric before and after MXene modification. (a) Plain cotton fabric; (b) MXene modified cotton fabric"

Fig.3

Element distribution diagram of MXene modified cotton fabric. (a) SEM image; (b) C; (c) O; (d) Ti"

Fig.4

Sensitivity of flexible electronic fabric"

Fig.5

Response time of flexible electronic fabric"

Fig.6

Resistance change of flexible electronic fabric under different pressures"

Fig.7

Stress-strain curve of flexible electronic fabric"

Fig.8

Repeatability of flexible electronic fabric"

Fig.9

Washing resistance of flexible electronic fabric"

Fig.10

Schematic diagram of pressure monitoring system"

Fig.11

Monitoring image of weight pressure. (a) Imaging of placing weights in sequence; (b) Imaging of placing weights at same time"

Fig.12

Monitoring image of hand pressure"

[1] LU L J, YANG B, ZHAI Y Q, et al. Electrospinning core-sheath piezoelectric microfibers for self-powered stitchable sensor[J]. Nano Energy, 2020. DOI: 10.1016/j.nanoen.2020.104966.
doi: 10.1016/j.nanoen.2020.104966
[2] CHEN J L, WEN X J, LIU X, et al. Flexible hierarchical helical yarn with broad strain range for self-powered motion signal monitoring and human-machine interactive[J]. Nano Energy, 2021. DOI: 10.1016/j.nanoen.2020.105446.
doi: 10.1016/j.nanoen.2020.105446
[3] YUAN J F, ZHU R, LI G Z. Self-powered electronic skin with multisensory functions based on thermoelectric conversion[J]. Adv Mater Technol, 2020. DOI:10.1002/admt.202000419.
doi: 10.1002/admt.202000419
[4] NING C, DONG K, CHENG R W, et al. Flexible and stretchable fiber-shaped triboelectric nanogenerators for biomechanical monitoring and human-interactive sensing[J]. Adv Funct Mater, 2021. DOI: 10.1002/adfm.202006679.
doi: 10.1002/adfm.202006679
[5] YUAN Z Q, SHEN G Z, PAN C F, et al. Flexible sliding sensor for simultaneous monitoring deformation and displacement on a robotic hand/arm[J]. Nano Energy, 2020. DOI: 10.1016/j.nanoen.2020.104764.
doi: 10.1016/j.nanoen.2020.104764
[6] MA J M, ZHU J Q, MA P, et al. Fish bladder film-based triboelectric nanogenerator for noncontact position monitoring[J]. ACS Energy Lett, 2020, 5(9): 3005-3011.
doi: 10.1021/acsenergylett.0c01062
[7] MA Y L, OUYANG J Y, RAZA T, et al. Flexible all-textile dual tactile-tension sensors for monitoring athletic motion during taekwondo[J]. Nano Energy, 2021. DOI: 10.1016/j.nanoen.2021.105941.
doi: 10.1016/j.nanoen.2021.105941
[8] JIANG D J, SHI B J, OUYANG H, et al. Emerging implantable energy harvesters and self-powered implantable medical electronics[J]. ACS Nano, 2020, 14(6): 6436-6448.
doi: 10.1021/acsnano.9b08268 pmid: 32459086
[9] ZENG X W, HU Y F. Sensation and perception of a bioinspired flexible smart sensor system[J]. ACS Nano, 2021, 15(6): 9238-9243.
doi: 10.1021/acsnano.1c03408 pmid: 34124901
[10] WANG Z M, AN J, NIE J H, et al. A self-powered angle sensor at nanoradian-resolution for robotic arms and personalized medicare[J]. Adv Mater, 2020. DOI: 10.1002/adma.202001466.
doi: 10.1002/adma.202001466
[11] MA L Q, SHUAI X T, HU Y G, et al. A highly sensitive and flexible capacitive pressure sensor based on a micro-arrayed polydimethylsiloxane dielectric layer[J]. J Mater Chem C, 2018, 6(48): 13232-13240.
doi: 10.1039/C8TC04297G
[12] LI W, JIN X, HAN X, et al. Synergy of porous structure and microstructure in piezoresistive material for high-performance and flexible pressure sensors[J]. ACS Appl Mater Interfaces, 2021, 13(16): 19211-19220.
doi: 10.1021/acsami.0c22938
[13] JAEGYU K, SEOUNGWOO B, SANGRYUN L, et al. Cost-effective and strongly integrated fabric-based wearable piezoelectric energy harvester[J]. Nano Energy, 2020. DOI: 10.1016/j.nanoen.2020.104992.
doi: 10.1016/j.nanoen.2020.104992
[14] ZOU J D, ZHANG M, HUANG J R, et al. Coupled supercapacitor and triboelectric nanogenerator boost biomimetic pressure sensor[J]. Adv Energy Mater, 2018. DOI: 10.1002/aenm.201702671.
doi: 10.1002/aenm.201702671
[1] YAN Tao, PAN Zhijuan. Strain sensing performance for thin and aligned carbon nanofiber membrane [J]. Journal of Textile Research, 2021, 42(07): 62-68.
[2] LI Yifei, ZHENG Min, CHANGZHU Ningzi, LI Liyan, CAO Yuanming, ZHAI Wangyi. Cotton knitted fabrics treated with two-dimensional transitional metal carbide Ti3C2Tx and property analysis [J]. Journal of Textile Research, 2021, 42(06): 120-127.
[3] TANG Jian, YAN Tao, PAN Zhijuan. Research progress of flexible strain sensors based on conductive composite fibers [J]. Journal of Textile Research, 2021, 42(05): 168-177.
[4] WU Yingxin, HU Chengye, ZHOU Xiaoya, HAN Xiao, HONG Jianhan, GIL Ignacio. Strain sensing property of flexible wearable spandex/polyaniline/polyurethane composites [J]. Journal of Textile Research, 2020, 41(04): 21-25.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] . [J]. JOURNAL OF TEXTILE RESEARCH, 2003, 24(06): 35 -36 .
[2] . [J]. JOURNAL OF TEXTILE RESEARCH, 2003, 24(06): 107 .
[3] . [J]. JOURNAL OF TEXTILE RESEARCH, 2003, 24(06): 109 -620 .
[4] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(01): 1 -9 .
[5] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(02): 101 -102 .
[6] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(02): 103 -104 .
[7] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(02): 105 -107 .
[8] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(02): 108 -110 .
[9] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(02): 111 -113 .
[10] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(03): 9 -10 .