Journal of Textile Research ›› 2024, Vol. 45 ›› Issue (06): 68-74.doi: 10.13475/j.fzxb.20221205101

• Textile Engineering • Previous Articles     Next Articles

Digitization prediction of air permeability of weft knitted fabrics based on stitch model

ZHAO Yajie, CONG Honglian(), DING Yuqin, DONG Zhijia   

  1. Engineering Research Center for Knitting Technology, Ministry of Education, Jiangnan University, Wuxi, Jiangsu 214122, China
  • Received:2022-12-29 Revised:2023-08-29 Online:2024-06-15 Published:2024-06-15

Abstract:

Objective Fabric stitch is an important factor affecting the air permeability of knitted fabrics. In order to correctly evaluate the air permeability of double-sided weft knitting fabric before the actual production, the double-sided fabric stitch model is constructed, and the digital expression of fabric porosity is made, so as to realize the prediction of fabric air permeability.

Method According to the Peirce weft knitting classical loop model, the unit stitch model is constructed for knitting structure including three basic loop forms: knitting stitch, tuck stitch, and miss. Then, based on the above three basic unit stitch models, the weave model of the fabric formed by weft knitting was constructed and digitized, the theoretical porosity was calculated, and the air permeability was measured by YG461E-III automatic air permeability meter in turn, and the relationship between the theoretical porosity and air permeability was obtained by linear fitting. Finally, two fabrics were selected to verify the rationality and applicability of the prediction system.

Results The unit stitch model was constructed for the 3 basic loop forms including knitting stitch, tuck stitch, and miss assuming that the loop form in the fabric in a completely ideal state. Setting the yarn diameter as d, the knitting stitch model, tuck stitch model, miss model of yarn vertical mapping area are achieved to be approximate to 16.34d2, 11.63d2, 4d2. For weft knitted double-sided fabrics in a rib configuration, when the front and back loops that can tuck or not knockover at most once, the assembly of loop units forming the front and back of the fabric is shown. When the front and back loops that can tuck or not knockover two or more times, the loop cell assembly is shown. By dividing all the loop forms by the structural unit division method of the stitch of the fabric and the morphological approximation method, it can be concluded that the front surface of the fabric contains 9 kinds of (F1-F9) different lattice yarn morphological models, the reverse side of the fabric contains 21 different (B1-B21) lattice yarn configuration models. Through the digital transformation of the stitch model and the construction of porosity matrix, the calculation method of the theoretical porosity of the fabric is obtained. The design of three weft double-sided stitch with different structures, calculating the theoretical porosity using the same method, and the theoretical porosity of the fabrics formed by the three stitch was 25.34%, 33.63%, and 27.01%, respectively. Then, the air permeability of the three fabrics was measured. The theoretical porosity and air permeability were analyzed by linear regression. And a linear regression equation is obtained. Through theoretical calculation, the air permeability of the three fabrics are 790.5, 1 128.4, and 858.6 mm/s, which are less accurate than the actual measured air permeability (the error rate is within ± 6%). The comparison results of the theoretical calculation and actual measurement of the two fabrics selected finally are in line with the above deduced results.

Conclusion This paper predicts the air permeability of complex fabric based on the three basic unit stitch models of knitting stitch, tuck stitch, and miss. Through the stitch model construction and digital transformation of the stitch of the three designed fabrics, the theoretical porosity of the fabric is calculated, and according to the measured air permeability, the linear regression analysis of the theoretical porosity and air permeability was carried out, and the linear regression equation which can explain the relationship between the two factors was obtained. In addition, through the air permeability analysis of the two selected fabrics, the analysis results are consistent with the above-deduced results, indicating that the construction method of the stitch model and the theoretical deduction method of the relationship between porosity and air permeability are reasonable and applicable, which provides a new method for the air permeability prediction of knitted fabrics.

Key words: weft knitted fabric, stitch model, vertical mapping area, porosity, permeability digitization prediction

CLC Number: 

  • TS101.1

Fig.1

Unit stitch models. (a) Stitch; (b) Tuck; (c) Miss"

Fig.2

Unit shape of front(a) and back(b) loops that can tuck or not knockover at most once"

Fig.3

Unit shape of front(a) and back(b) loops that can tuck or not knockover two or more times"

Fig.4

Fabric layered loop diagram and structure division"

Fig.5

Fabric front structure unit"

Fig.6

Fabric back structure unit"

Fig.7

Structural unit morphology approximation. (a) Two or more times tuck; (b) Two or more times not knockover"

Fig.8

Digital transformation of fabric structure"

Fig.9

Approximate polygon transformation calculates overlapping partial area"

Fig.10

Running thread notation of three stitches. (a) Stitch 1; (b) Stitch 2; (c) Stitch 3"

Tab.1

Fabric specification parameters"

面料编号 组织结构 面密度/(g·m-2) 厚度/mm
1# 组织1 165 0.76
2# 组织2 152 0.73
3# 组织3 141 0.71

Fig.11

Layered loop diagram and structure division of stitch 1"

Fig.12

Running thread notation of two fabrics (a) Fabric A; (b) Fabric B"

[1] 许应春. 机织物结构及服用因素与透气性关系的研究[D]. 苏州: 苏州大学, 2008: 7-8.
XU Yingchun. Research on relation between air permeability and woven structure with garment fac-tors[D]. Suzhou: Soochow University, 2008: 7-8.
[2] 林浩, 钟国能, 何立峰, 等. 透气网眼空气层针织面料的设计开发[J]. 针织工业, 2019(1): 7-9.
LIN Hao, ZHONG Guoneng, HE Lifeng, et al. Design and development of breathable spacer knitted fabric[J]. Knitting Industries, 2019(1): 7-9.
[3] LIU Yanping, HU Hong. Compression property and air permeability of weft-knitted spacer fabrics[J]. The Journal of the Textile Institute, 2011, 102(4): 366-372.
[4] 吴湘济. 基于BP神经网络的服装里料透气性能预测[J]. 丝绸, 2007(10): 42-43.
WU Xiangji. Prediction of clothing feeding air permeability based on BP neural network[J]. Journal of Silk, 2007(10): 42-43.
[5] 徐广标, 王府梅. 基于BP神经网络的精纺毛织物透气性能的预测[J]. 毛纺科技, 2008(2): 54-56.
XU Guangbiao, WANG Fumei. Prediction of the permeability of worsted fabrics using BP neural net work[J]. Wool Textile Journal, 2008(2): 54-56.
[6] 曹建达. 棉织物透气性能的BP神经网络预测研究[J]. 棉纺织技术, 2003, 31(11): 19-21.
CAO Jianda. Predicting research of cotton fabric air permeability with BP[J]. Cotton Textile Technology, 2003, 31(11): 19-21.
[7] 邱茂伟, 王府梅. 机织物透气性能的预测研究[J]. 纺织学报, 2005, 26(4): 73-75.
QIU Maowei, WANG Fumei. Study on the prediction of woven fabrics air per meability[J]. Journal of Textile Research, 2005, 26(4): 73-75.
[8] 徐瑶瑶, 朱俐莎, 杜磊, 等. 棉织物透气性能的预测研究[J]. 现代纺织技术, 2015, 23(3): 26-30.
XU Yaoyao, ZHU Lisha, DU Lei, et al. Prediction of air permeability of cotton fabrics[J]. Advanced Textile Technology, 2015, 23(3): 26-30.
[9] 王健, 张晓丽, 刘陶. 机织物透气性预测的投影寻踪回归模型[J]. 纺织学报, 2011, 32(8): 46-49, 61.
WANG Jian, ZHANG Xiaoli, LIU Tao. Projection pursuit regression model for prediction of air permeability of woven fabrics[J]. Journal of Textile Research, 2011, 32(8): 46-49, 61.
[10] ZHU Guocheng, FANG Yuan, ZHAO Lianying, et al. Prediction of structural parameters and air permeability of cotton woven fabric[J]. Textile Research Journal, 2018, 88(14): 1650-1659.
[11] OGULATA R Tugrul, MEZARCIOZ Serin. Total porosity, theoretical analysis, and prediction of the air permeability of woven fabrics[J]. Journal of the Textile Institute, 2012, 103(6): 654-661.
[12] 程燕婷, 孟家光, 薛涛, 等. 3D打印纬平针面料的制备[J]. 纺织学报, 2022, 43(9): 115-119.
CHENG Yanting, MENG Jiaguang, XUE Tao, et al. Preparation of 3D printed weft plain knitted fabric[J]. Journal of Textile Research, 2022, 43(9): 115-119.
[13] 郑培晓, 蒋高明. 基于WebGL的纬编提花织物三维仿真[J]. 纺织学报, 2021, 42(5): 59-65.
ZHENG Peixiao, JIANG Gaoming. Three-dimensional simulation of weft-knitted jacquard fabric based on WebGL[J]. Journal of Textile Research, 2021, 42(5): 59-65.
[14] 董甜甜, 王蕾, 高卫东. 防羽面料孔径及分布特征与透气性和防钻绒性的关系[J]. 纺织学报, 2020, 41(12): 49-53.
doi: 10.13475/j.fzxb.20200503605
DONG Tiantian, WANG Lei, GAO Weidong. Relations of pore size and distribution characteristics of down-proof fabric with breathability and anti-drilling property[J]. Journal of Textile Research, 2020, 41(12): 49-53.
doi: 10.13475/j.fzxb.20200503605
[1] FANG Xueming, DONG Zhijia, CONG Honglian, DING Yuqin. Design of variable porosity structure and evaluation of permeablity and moisture conductivity of single side weft knitted fabric [J]. Journal of Textile Research, 2024, 45(05): 51-59.
[2] FENG Ya, SUN Ying, CUI Yanchao, LIU Liangsen, ZHANG Hongliang, HU Junjun, JU Ao, CHEN Li. Interlaminar shear properties of composites with Ni-Cr alloy weft knitted electric heating layer [J]. Journal of Textile Research, 2024, 45(04): 89-95.
[3] CHANG Chenyu, WANG Yuwei, YUAN Xuyang, LIU Feng, LU Zhiwen. Dynamic deformation simulation of weft knitted fabrics based on improved mass-spring model at interlacing points [J]. Journal of Textile Research, 2024, 45(01): 99-105.
[4] MEI Baolong, DONG Jiuzhi, REN Hongqing, JIANG Xiuming. Unit modeling and pore analysis of C/C soft-hard blended preform based on multi-dimensional modeling [J]. Journal of Textile Research, 2023, 44(09): 108-115.
[5] RU Xin, ZHU Wanzhen, SHI Weimin, PENG Laihu. Deformation prediction and simulation of weft knitted fabrics with non-uniform density distribution [J]. Journal of Textile Research, 2022, 43(06): 63-69.
[6] YANG Liu, LI Yujia, ZHANG Xin, HE Wenjing, TONG Shenghao, MA Lei, ZHANG Yi, ZHANG Ruiyun. Effect of tightness of colored knitted fabrics on color prediction [J]. Journal of Textile Research, 2022, 43(05): 104-108.
[7] MEI Baolong, DONG Jiuzhi, YANG Tao, JIANG Xiuming, REN Hongqing. Key technology for compaction and densification of micro-porous plates made from 3-D four-directional carbon/carbon preforms [J]. Journal of Textile Research, 2022, 43(05): 116-123.
[8] HU Xudong, SONG Yanfeng, RU Xin, PENG Laihu. Modeling and loop length reverse design for reducing diameter tubular weft knitted fabrics [J]. Journal of Textile Research, 2021, 42(04): 80-84.
[9] LIU Lidong, LI Xinrong, LIU Hanbang, LI Dandan. Electrostatic adsorption model based on characteristics of weft knitted fabrics [J]. Journal of Textile Research, 2021, 42(03): 161-168.
[10] SUN Yabo, LI Lijun, MA Chongqi, WU Zhaonan, QIN Yu. Simulation on tensile properties of tubular weft knitted fabrics based on ABAQUS [J]. Journal of Textile Research, 2021, 42(02): 107-112.
[11] LIANG Jialu, CONG Honglian, ZHANG Aijun. Technical design model of weft-knitted two-side jacquard fabric [J]. Journal of Textile Research, 2020, 41(01): 69-74.
[12] YANG Haizhen, FANG Kuanjun, LIU Xiuming, CAI Yuqing, AN Fangfang, HAN Shuang. Influence of ink-jet printing pretreatment on fabric structures [J]. Journal of Textile Research, 2019, 40(05): 84-90.
[13] MA Zhenping, MAO Zhiping, ZHONG Yi, XU Hong. De-curling control of single-weft knitted fabric in open width pad-steam dyeing [J]. Journal of Textile Research, 2019, 40(05): 91-96.
[14] LIU Sai, ZHENG Dongming, PAN Xingxing, LIU Gui, DU Zhaoqun. Formation and characterization of auxetic yarns with interlaced-helical structure and fabrics [J]. Journal of Textile Research, 2019, 40(02): 26-29.
[15] . Modelling and algorithm of weft knitted fabric [J]. Journal of Textile Research, 2018, 39(09): 44-49.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!