JOURNAL OF TEXTILE RESEARCH ›› 2013, Vol. 34 ›› Issue (5): 116-120.

Previous Articles     Next Articles

Flexible dynamics simulation for space four bar linkage weft insertion mechanism based on ANSYS and ADAMS

  

  • Received:2012-05-25 Revised:2012-12-06 Online:2013-05-15 Published:2013-05-09

PDF (PC)

604

Abstract: As for the requirement of the weft insertion mechanism of spatial four-bar linkage ,this paper builds three-dimensional solid model of this mechanism with PROE , and generates the rigid body model of the spatial four-bar linkage weft insertion mechanism ,then the simulation for Space Four Bar Linkage Mechanism will be done by flexible dynamics analysis method based on ANSYS and ADAMS .At the same time，compared with the rigid dynamics simulation data，The results show that flexible dynamics simulation analysis of the space of four weft insertion mechanism is feasible，and can be used to optimize the weft insertion mechanism later.

Key words: rapier loom, spatial four bar linkage weft insertion mechanism, flexible dynamics analysis, ANSYS-ADAMS co-simulation

CLC Number: 

  • TB115
[1] . Inertial load change rule and speed increasing test of rapier loom [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(08): 144-149.
[2] . Design of 3-D woven fabric selvage modeling process [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(04): 50-54.
[3] . Grass cloth with traditional characteristic produced by modern technology [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(05): 37-0.
[4] . Dynamic analysis of flexible follower conjugate cams beating-up mechanism in rapier loom [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(05): 137-0.
[5] SONG Ya-Nan, XU Rong-Hua, WANG Qin-Ruo. Design and analysis on filter of rapier Loom’s warp tension control [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(2): 115-120.
[6] . Noise Estimation and Filter Design of Rapier Loom’s Tension Control [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(8): 128-132.
[7] LIN Wanhuan;WANG Ying;ZHAO Xiong;CHEN Jianneng. Establishment and application of kinematics equations of beating-up motion based on Hermite polynomials [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(3): 127-132.
[8] GUO Hongliang;WANG Qing;YE Guoming. Design of transitional curve of modified trapezoid acceleration motion [J]. JOURNAL OF TEXTILE RESEARCH, 2007, 28(8): 100-101.
[9] XIAO Weibing. Tensile force control of electronic weft insertion on the separated slay type flexible rapier loom [J]. JOURNAL OF TEXTILE RESEARCH, 2007, 28(7): 105-108.
[10] HU Fengxia;GUO Xiaobao;ZHANG Jian;DING Zijun. Modification of let-off mechanism of towel rapier loom GA799-Ⅰ [J]. JOURNAL OF TEXTILE RESEARCH, 2007, 28(4): 107-110.
[11] ZHENG Zhi-yu;LI Jia-lin;TAO Yong-zheng. Analysis of weft insertion mechanism of G6300 rapier loom [J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(6): 91-92.
[12] WANG Qing-jiu;CHEN Zong-nong;ZHAN Jian-chao. Research and development of the intelligent detecting system of the rapier loom [J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(5): 106-107.
[13] ZHONG Yuan-jing;CHEN Zong-nong;ZHU Xin-Jie . High speed rapier loom control system based on DSP [J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(1): 87-89.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd