Journal of Textile Research ›› 2015, Vol. 36 ›› Issue (12): 125-130.

Previous Articles     Next Articles

Analysis of traveller performance based on ADAMS

  

  • Received:2014-11-14 Revised:2015-08-28 Online:2015-12-15 Published:2015-12-10

PDF (PC)

164

Abstract:

With the increasing of the spinning speed, whether the geometric shape of traveller is reasonable and whether the matching of the traveler and the ring is proper tave great influence on the yarn quality. The force between ring and traveller was analyzed firstly. Then, entity models of ring and three kinds of travellers were built in SolidWorks. Finally, simulation analysis of ring and traveler were conducted in Adams. In summary, the conclusion is that U1ULUDR traveller using performance is the best one and FO traveller using performance is better than 6903 traveller. This paper provides a method for the analysis of the force between ring and traveller and a theoretic basis for traveller using, design and manufacture.

Key words: traveler, force analysis, SolidWorks, ADAMS

CLC Number: 

  • TS 103.8
[1] . Research on dip angle of traveller on ring spinning [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(08): 127-132.
[2] . Modeling and motion simulation of dual line computerized hosiery machine’s knitting element [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(05): 115-122.
[3] . Study on three-dimensional model of on-the-job men’s neck based on SolidWorks [J]. Journal of Textile Research, 2015, 36(04): 107-112.
[4] . On-line detecting system based on optoelectronic technology for ring spun-yarn breakage [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(8): 94-0.
[5] . Flexible dynamics simulation for space four bar linkage weft insertion mechanism based on ANSYS and ADAMS [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(5): 116-120.
[6] LIU Xin, HU Xu-Dong, CHEN Hong-Li. Dynamic analysis of warp knitting swing machine guide bar swing mechanism based on flexible multi-body system [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(6): 92-96.
[7] ZHAO Fu. Optimized design of the needle bar mechanism [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(5): 126-129.
[8] QIU Haifei;WANG Yixuan. Simulation and analysis of warp tension based on virtual prototyping [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(1): 119-123.
[9] MA Qinghong;XU Bojun;Wang Xiaoxu;Wu Biyun;Xu Jin. Dynamic balance optimization of middle shaft system of cotton comber based on ADAMS [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(10): 121-123.
[10] YU Zai-hai;WU Wen-ying;CHEN Rui-qi. Theoretical analysis of traveler position during spinning [J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(7): 37-39.
[11] DING Cai-hong;ZHANG Shao-ping;SUN Yi-ze. Kinematical analysis of the needle′s driving mechanism within a carpet tufting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(5): 37-40.
[12] MA Shi-ping. 基于MATLAB的六连杆打纬机构优化设计及仿真 [J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(3): 40-42.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] YAO Jie;YE Guo-ming . Strange attractor in sliver evenness series[J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(1): 47 -48 .
[2] . [J]. JOURNAL OF TEXTILE RESEARCH, 1984, 5(09): 33 -35 .
[3] . [J]. JOURNAL OF TEXTILE RESEARCH, 1986, 7(05): 44 .
[4] YU Wei-dong;LIU Hong-ling;ZHANG Yue-ting . Mechanism of wool slenderizing and setting[J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(2): 15 -17 .
[5] YIN Ying;ZHENG Jin-huan;ZHANG Ling-ling;CHEN Wei-guo. Effect of heat treatments on structure and mechanical properties of PTT fibers[J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(11): 32 -35 .
[6] . [J]. JOURNAL OF TEXTILE RESEARCH, 1982, 3(10): 12 .
[7] . [J]. JOURNAL OF TEXTILE RESEARCH, 1989, 10(08): 34 -36 .
[8] . [J]. JOURNAL OF TEXTILE RESEARCH, 1991, 12(04): 43 .
[9] . [J]. JOURNAL OF TEXTILE RESEARCH, 1982, 3(09): 4 .
[10] . [J]. JOURNAL OF TEXTILE RESEARCH, 1987, 8(02): 52 -55 .
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd