Journal of Textile Research ›› 2016, Vol. 37 ›› Issue (05): 143-149.

Previous Articles     Next Articles

Analysis of overfeed control system model in open-width heat setting machine

  

  • Received:2015-05-13 Revised:2015-11-18 Online:2016-05-15 Published:2016-05-10

Abstract:

During the current geat setting process, the regulation of overfeed mostly relies on manual adjustment instead of setting up accurate model of overfeed control system and analyzing the stability of the system. As a result, the problems of low control accuracy, unstable control and difficult setting of parameters are frequently appeared. By analyzing the mechanical structure and components of the overfeed control system, the relationship between vehicle speed and overfeed was obtained, and the overfeed control system accurate model was established. System stable constraints and marginally stable gain were respectively obtained by Routh Stability Criterion and Root Locus method, which can stabilize the system and realize the automatic control of overfeed. Test results show that the overfeed control system model is correct and the method for stability analysis is effective. The accurate quantitative control of the owerfeed.

Key words: heat setting machine, overfeed, system modeling, stability

[1] Bedeloglu, Ayse.The influence of heat-setting process on physical properties of ribbon-type fancy yarns and fabrics produced from them [J]. Industria Textila,2014,65(1):3-9.
[2] R. H. Yang. C. W. Kan. Effect of Heat Setting Parameters on Some Properties of PLA Knitted Fabric [J]. Fibers and Polymers,2013,8(14): 1347-1353.
[3] 李金热. 基于PLC的拉幅定型机控制系统设计[J].制造业自动化,2010,32(11):134. Li Jinre.Design of control system for the tentering and setting machine based on PLC[J]. Manufacturing Automation,2010,32(11):134.
[4] 曾雄洪. 基于PROFIBUS-DP现场总线的拉幅定型机自动控制系统设计[D].山东:山东大学,2012,11. Zeng Honghong. Design of automatic control system for stenter frame based on PROFIBUS-DP[D].Shandong:Shandong University,2012,11.
[5] 孟宪朋. 拉幅定型自动控制系统关键点研究及人机界面设计[D]. 山东:山东大学,2012,27. Men Xianpeng. Key points research and human machine interaction design of automatic control system for stenter frame[D]. Shandong:Shandong University,2012,27.
[6] Sibel Sardag, Ozcan Ozdemir, Ismail Kara. The effects of heat-setting on the properties of polyester/viscose blended yarns[J]. FIBRES & TEXTILES in Eastern Europe, 2007,15(4): 50-53.
[7] 陈林. 纺织超喂电机驱动器的研制[D].浙江:浙江大学,2013,12. Chen Lin. The research and development of overfeeding motor driver for winding[D].zhejiang:Zhejiang University,2013,12.
[8] 吕华林.异步电机矢量控制变频调速系统的研究[D].武汉:武汉理工大学,2010,7-18. Lv Hualin. Researeh of asynehronous motor vector contfol variable frequency regulating system[D].Wuhan:Wuhan University,2010,7-18.
[9] 吴金华.异步电机无速度传感器矢量控制系统研究与设计[D].湖南:湖南大学,2013,10-14. Wu Jinhua. The research and design of the asynchronous motor speed sensorless vector control system[D].Hunan:Hunan University,2013,10-14.
[10] 张兴华.基于Simulink PSB的异步电动机变频调速系统的建模与仿真[J].系统仿真学报,2005,17(9):99-103. Zhang Xinhua.Modeling and simulation for variable-frequency drives of asynchronous motors based on simulink/PSB[J]. Journal of System Simulation,2005,17(9):99-103.
[11] 彭鞍虹.通用变频器异步电动机的传递函数[J].鞍山钢铁学院学报,2000,23(6):447-449. Peng Anhong. Transmitting function of inverter-induction motor[J]. Journal of anshan institute of I .&S .technology,2000,23(6):447-449.
[12] 陈伯时.电力拖动自动控制系统—运动控制系统 [M].3版.北京:机械工业出版社,2012:88. Chen Boshi. Electric drive automatic control system, the motion control system[M]. 3th ed. Beijing:China Machine PRESS,2012:88.
[13] 张丽敏,陈孝桢.自动控制原理 [M].1版.北京:科学出版社,2014:241. Zhang Limin,Chen Xiaozhen.Principle of automatic. 1th ed. Beijing:Science Press,2014:241.
[1] . Preparation and properties of novel modified polyester [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 22-26.
[2] . Influence of flame retardant finishing with silicon-phosphorus hybridization on the structure and thermal stability of wool fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(12): 101-105.
[3] . Light-stability and enhancement mechanism of polyphenylene sulfide fiber modified by graphene [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(11): 1-8.
[4] . Numerical simulation of condensation heat transfer in mandrel-containing horizontal heat exchanger tube [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(10): 118-123.
[5] . Oxidation resistance and thermal stability of fatty acid esters lubricant agent in spinning oil [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(04): 68-72.
[6] . Anti-ultraviolet finishing and light stability of bleached wool [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(03): 99-107.
[7] . Preparation and characterization of low melting point polyamide [J]. Journal of Textile Research, 2016, 37(3): 6-10.
[8] . Heat stability of estercatechins and their dyeing effects on silk [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 90-93.
[9] . Quantum chemistry study on photostability of two hemicyanine fluorescent dyes [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(06): 83-90.
[10] . Separation and UV-visible spectral spectral properties of green components of pigment in naturally green colored cotton fibers [J]. Journal of Textile Research, 2015, 36(11): 87-91.
[11] . Influence of fluorescent pigments on properties of alginate fiber spinning solution and its membrane [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(05): 48-53.
[12] . Friction resistance and anti-UV properties of electron beam evaporated deposited film on fabrics [J]. Journal of Textile Research, 2015, 36(04): 87-91.
[13] . The structural design and sensing performance of CCFs conductive knitting fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(9): 31-0.
[14] . Modification of poly (3-hydroxybutyrate-co-4-hydroxybutyrate) by epoxy-based chain extenders [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(8): 139-0.
[15] . Influence of oligomer contents on melt spinning process of poly (lactic acid) [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(8): 133-0.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(02): 105 -107 .
[2] WANG Ju-ping;YIN Jia-min;PENG Zhao-qing;ZHANG Feng. Ultrasonic wave aided enzymatic washing of reactive dyed fabrics[J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(1): 93 -95 .
[3] DENG Hua;ZHANG Ji-mei;LI Xiu-ming;LI He;TANG Wan-sheng. Manufacture and property of multi-functional nano-titanium dioxide finishing agents for fabric[J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(3): 92 -94 .
[4] XU Jin-yun;ZHENG Guo;GE Qi;ZHOU Cun;WEI Jun-fu . Synthesis and properties of C18 alkyl betaine[J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(1): 22 -24 .
[5] MA Xin-min;YU Wei-dong . Effect of fabric structure on the shrinkage of PBT/PET bicomponent filaments[J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(1): 54 -55 .
[6] . [J]. JOURNAL OF TEXTILE RESEARCH, 1984, 5(09): 5 -10 .
[7] . [J]. JOURNAL OF TEXTILE RESEARCH, 2003, 24(06): 61 -63 .
[8] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(04): 16 -17 .
[9] . [J]. JOURNAL OF TEXTILE RESEARCH, 2000, 21(04): 56 -59 .
[10] . [J]. JOURNAL OF TEXTILE RESEARCH, 2000, 21(05): 31 -33 .