Journal of Textile Research ›› 2016, Vol. 37 ›› Issue (05): 23-27.

Previous Articles     Next Articles

Low-damage carding technology of superfine wool

  

  • Received:2015-06-23 Revised:2016-01-21 Online:2016-05-15 Published:2016-05-10

Abstract:

In order to solve the problems of difficulty processing and carding damage of the superfine wool, the paper analyzed the causes and solutions to thecarding damage. Through the measurement of fiber length, the number of neps, noil ratio in work space of combing, the carding process parameters were optimized, the optimal carding processing conditions were determined by TEAM-3 and orthogonal experiments as following: 2# gauge, 3# speed ratio, the tooth density of cylinder wire cloth and doffer wire cloth was 60.7 teeth/cm2 and 62.5 teeth/cm2, respectively, and top produced was 20g/m. The experimental results showed that the average loss of fiber length of the superfine wool tops derived from the optimal processing wasless than 0.5 mm. The number of neps was also decreased and yarn quality was improved.

Key words: superfine wool, carding, low-damage, optimization

[1] . Prediction and digital design of high-pile knitted fabric [J]. Journal of Textile Research, 2018, 39(10): 63-67.
[2] . Influence of full-color weave on color mixing law of compound fabric structure with triple-weft [J]. Journal of Textile Research, 2018, 39(10): 44-49.
[3] . In fluences of raw materials and fabric parameters on performance of anti-arc fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 41-45.
[4] . Simulation of one-piece flow garment assembly line based on Flexsim software [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(06): 155-161.
[5] . Connotation and evaluation of fiber carding properties [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 24-29.
[6] . Evaluation and optimization of compressed air leakage in air-jet loom [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 130-136.
[7] . Route planning for concentric spinneret inspection based on improved ant colony algorithm [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(11): 124-130.
[8] . Optimization design of multi-light source for foreign fiber detection based on clustering neural network [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(10): 104-112.
[9] . Theoretical study of influence of spiral angle of licker-in on carding quality [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(09): 131-135.
[10] . Investigation on carding thinning of cotton-stalk bark cellulose fibers [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(08): 28-31.
[11] . Low-loss optimization of cotton/ hemp blending process [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(01): 35-39.
[12] . Process optimization of superhigh draft spinning of Lyocell yarnesr [J]. Journal of Textile Research, 2016, 37(3): 25-30.
[13] . Warp knit fabric defect detection method based on optimal Gabor filters [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(11): 48-54.
[14] . Influence of process optimization of breaker drawing on yarn quality of phenolic fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(10): 26-31.
[15] . Influence of peoduct development process of fast fashion brand on time performance [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(10): 113-119.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(03): 48 -49 .
[2] . [J]. JOURNAL OF TEXTILE RESEARCH, 1996, 17(05): 54 -56 .
[3] . [J]. JOURNAL OF TEXTILE RESEARCH, 1984, 5(08): 60 .
[4] . [J]. JOURNAL OF TEXTILE RESEARCH, 1998, 19(05): 59 -61 .
[5] . [J]. JOURNAL OF TEXTILE RESEARCH, 1987, 8(11): 27 -30 .
[6] . [J]. JOURNAL OF TEXTILE RESEARCH, 1989, 10(07): 43 -45 .
[7] LIU Jianli;ZUO Baoqi. Application of BP neural network on the identification of fabric defects[J]. JOURNAL OF TEXTILE RESEARCH, 2008, 29(9): 43 -46 .
[8] . [J]. JOURNAL OF TEXTILE RESEARCH, 1982, 3(08): 34 .
[9] LIU Yan;LIU Xiao-gang . Fashion-design expert system facing unprofessional customer[J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(1): 67 -69 .
[10] . [J]. JOURNAL OF TEXTILE RESEARCH, 1990, 11(05): 4 -8 .