JOURNAL OF TEXTILE RESEARCH ›› 2016, Vol. 37 ›› Issue (09): 134-139.

Previous Articles     Next Articles

Evaluation standards and program implementation on damage status of carbon fiber warp weaving

  

  • Received:2015-10-19 Revised:2016-06-06 Online:2016-09-15 Published:2016-09-19

Abstract:

In order to online monitor damage status of carbon fiber during weaving with upper control system for further providing important references to adjust the loom speed and change the yarn tension and even check stands, a set of applicable evaluation standard and implementation method on damage status of carbon fiber during weaving were put forward. According to the fuzzy control theory, the input and the output of the fuzzy algorithm were analysed and fuzzy rules were also put forward. The realized program can provide evaluation of single yarn damage degree with the Matlab fuzzy logic toolbox. By calling Matlab procedure the evaluation of regional yarn damage is implemented on Labview software platform. The error of damage evaluation results between evaluation algorithm and artificial experience judgment is small. The evaluation standard and implementation method are feasible.

Key words: carbon fiber, weaving, warp damage status, fuzzy algorithm, evaluation standard

[1] . Designing method of random fabric based on random lifting of heald frames [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 33-40.
[2] . Braiding technologies of 2-D braided carbon fiber tubular fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(06): 64-69.
[3] . Innovative weaving for integral pleated woven fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 42-46.
[4] . Kinematics analysis and dimension synthesis of beating-up mechanism for carbon fiber multi-layer loom [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(11): 137-142.
[5] . Bending peoperties comparison of thick-section carbon fiber composites based on different three-dimensional woven structures [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(09): 66-71.
[6] . Forming technology for warp weave curved fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(08): 39-43.
[7] . Design of 3D woven reinforcement weaving system based on cylinder [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(06): 124-129.
[8] . Structural characterizations of carbon fiber needled felts based on mixed Weibull distribution [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(06): 52-57.
[9] . Design and development of warm clothing for the elderly [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(04): 103-108.
[10] . Friction and wear properties of stratified 3-D woven carbon fiber preform reinforced phenolic resin-based composites [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(02): 75-80.
[11] . Integrated design of carbon fiber multi-layer diagonal weaving equipment [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(4): 128-0.
[12] . Preparation of carbon nanofiers from Polyacry lonitrile with high molecular weight [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(3): 1-0.
[13] . Size recipe design mechanism for low add-on weaving [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(12): 60-64.
[14] . Weaving techniques and mathematical model of techniques for patterned simple gauze of Song dynasty [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(11): 42-47.
[15] . Characteristics of warp yarn hanging path under weaving tension [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(11): 32-36.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!