JOURNAL OF TEXTILE RESEARCH ›› 2016, Vol. 37 ›› Issue (11): 136-140.

Previous Articles     Next Articles

Analysis on mechanical structure of electric tufting gun

  

  • Received:2015-09-07 Revised:2016-03-23 Online:2016-11-15 Published:2016-11-23

Abstract:

In order to master the using method and debugging methods of the electric tufting gun and improve the quality of tufting, a type of the electric tufting gun was chosen as the research object. First, the mechanical structure characteristics and working principles of the electric tufting gun are introduced. Then, in order to be familiar with the coordination requirements between needle and scissor, MatLab-Simulink is used for the kinematics simulation and time series analysis of two-slider-crank mechanism. Finally the results of kinematics equation can be used for variable parameter adjustment, which is convenient for tufting gun debugging to satisfy the requirement of weaving the corresponding pile height. The theoretical data can be used to debug the tufting gun and reduce the debugging time.

Key words: electric trfting gun, mechanism, two-slider-crank mechanism, steel needle

[1] . Design method for weft insertion mechanism of super width automatic loom based on electromagnetic launch [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(07): 130-136.
[2] . Innovative weaving for integral pleated woven fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 42-46.
[3] . Adsorption of modified waste cotton to Cu+2 in aqueous solution [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(12): 112-118.
[4] . Smooth and reverse design of conjugated cams of weft insertion [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(12): 141-149.
[5] . Analysis of evaluation method of thermal protective performance of firefighter protective clothing exposure to low level radiation [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(12): 162-168.
[6] . Kinematics analysis and dimension synthesis of beating-up mechanism for carbon fiber multi-layer loom [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(11): 137-142.
[7] . Research progress of design methods of ventilation mechanism of clothing [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(10): 153-159.
[8] . Design and optimization of partial parameters of main drafting for FA322B drawing frame [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(08): 139-143.
[9] . Stab-resistant mechanism of fabrics and influence of cutter shape on stab resistance [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(08): 55-61.
[10] . Design of displacement diagram for rapier in variable lead screw weft insertion mechanism [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(04): 121-126.
[11] . Resonance suppression strategy of shogging mechanism in tufting carpet loom [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(04): 140-144.
[12] . Antimicrobial property of naturally brown cotton [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(03): 1-5.
[13] . Modeling and simulation of elliptical motion mechanism for R680 series automatic printing machine [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(03): 143-148.
[14] . Application of 3D printing in beating-up and shedding [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(01): 140-146.
[15] . Kinematic analysis of eccentric belt drive mechanism and its application in drawing frame [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(12): 117-122.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!