JOURNAL OF TEXTILE RESEARCH ›› 2016, Vol. 37 ›› Issue (11): 19-25.

Previous Articles     Next Articles

Research on compressive force transmission properties and densities-mechanical properties model of cotton fiber assembly

  

  • Received:2016-02-17 Revised:2016-06-09 Online:2016-11-15 Published:2016-11-23

Abstract:

In order to analyze compressive force transmission properties of the cotton fiber assembly, the comperssion test of cotton fiber assembly was carried out in the universal test of machine, pressure was acquired in the pressure sensing system form the upper, middle and lower cotton layer. This paper analyzed the relationship between pressure and strain, and relative density of cotton fiber saaembly.The results show that various cotton layers of pressure increases with increasing strain of cotton fiber assembly during compressing process. And various cotton layers of pressure become lower in turn from top to bottom, the interlayer pressure showed obvious differences. By subsequent analysis on the cotton fiber assembly density with mechanics, it was found that the relation between relative density and presuure could be expressed in best linearity. Namely, various cotton layers of pressure was in the linear increasing in the compression process with relative density increasing. The R-square of regression function between relative density and presuure difference of various cotton layers of pressure for testing sample was close to 1. It is showed that cotton fiber assembly has significant strain-rate sensitivity.

Key words: cotton fiber assembly, compressive force, transmission, relative density

[1] . Preparation of waterborne polyurethane coating by mechanical foaming based on response surface methodology [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(07): 95-099.
[2] . Automatic moisture transmission and perspiration test method of fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(01): 45-50.
[3] . Motion control and experiment analysis of high speed axial suspension knitting needle in zero transmission [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(4): 137-0.
[4] . Fabrication and application of fabric based frequency selective surface [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(2): 141-0.
[5] . Balance optimization based on detaching roller transmission mechanism of combing machine [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(08): 133-138.
[6] . Influence of dust content in fabric on its heat-moisture transmission [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(03): 32-0.
[7] . Design of non-contact rotational temperature transmitter for heated drawing roller [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(3): 116-120.
[8] . The research and application of loom data transmission protocol based on Multicast technology [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(9): 148-152.
[9] Jun-Hong YAO. Research and development of yarn length recorder for cone winding [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(9): 126-129.
[10] . Large torque and smooth transmission system design of raising machine [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(10): 134-140.
[11] LIU Xiaosong;GAO Yonghong;WANG Fumei;SHI Meiwu. Testing light shielding properties of fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(3): 70-76.
[12] WU Jing;CHEN Gang;XU Zhiming. Loom information transmission system development based on wireless technology [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(7): 127-130.
[13] CHEN Benyong;HAN Weizhi;ZHANG Liqiong;CAI Xiaoxi. Design of a textile transmission properties detecting system based on VC++ [J]. JOURNAL OF TEXTILE RESEARCH, 2008, 29(9): 121-124.
[14] MIAO Xuhong;CEMingqiao. vibration behaviorof cushioning warp knitted spacer fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2008, 29(11): 57-60.
[15] ZHANG Wei;WANG Xunming;ZHU Yongren. Analyzing transmission shaft dynamic character of jacquard machine by using transfer matrix method [J]. JOURNAL OF TEXTILE RESEARCH, 2007, 28(9): 107-109.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!