JOURNAL OF TEXTILE RESEARCH ›› 2016, Vol. 37 ›› Issue (12): 60-64.

Previous Articles     Next Articles

Size recipe design mechanism for low add-on weaving

  

  • Received:2016-03-29 Revised:2016-07-07 Online:2016-12-15 Published:2016-12-21

Abstract:

Aiming at the problem of weaving with greater sizing add-on rate in existing textile enterprise, the different size formulations were adopted to size cotton yarns and the sizing add-on rate, moisture regain and mechanical property were tested. The sized yarns woven in the actual production. The warp and weft stops, weaving efficiency were counted. The performance and morphological structure of sizing membranes, the influences of sizing recipe components on morphological structure of sizing membranes and phase separation of sizing solution were investigated, and it is believed that this might be the reason why greater add-on rate of existing sizing materials are required to meet the requirements of high speeding weaving. Based on the above analysis, the principles of design sizing recipes for high performance cotton yarns of low sizing add-on rate are proposed, and weaving processability of cotton yarns using an optimised sizing formulation composed of polyvinyl alcohol and modified starch Kollotex A115 at a ratio of 37.5:62.5 for low sizing add-on rate of 5.5%~6.8% are reported to ease the burden of dyeing pretreatment.

Key words: low size add-on, morphological structure, weaving, phase separation, size recipe

[1] . Designing method of random fabric based on random lifting of heald frames [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 33-40.
[2] . Innovative weaving for integral pleated woven fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 42-46.
[3] . Preparation of ultrafine polyacrylonitrile nanofibers via composite electrospinning [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(11): 16-21.
[4] . Forming technology for warp weave curved fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(08): 39-43.
[5] . Dissolving modes of wool fibres observed by scanning electron microscopy [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(07): 1-5.
[6] . Design of 3D woven reinforcement weaving system based on cylinder [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(06): 124-129.
[7] . Integrated design of carbon fiber multi-layer diagonal weaving equipment [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(4): 128-0.
[8] . Weaving techniques and mathematical model of techniques for patterned simple gauze of Song dynasty [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(11): 42-47.
[9] . Characteristics of warp yarn hanging path under weaving tension [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(11): 32-36.
[10] . Evaluation standards and program implementation on damage status of carbon fiber warp weaving [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 134-139.
[11] . Study on correlation among cashmere morphological structure [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(06): 18-21.
[12] . Moisture adsorption property of rice-straw fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(05): 1-0.
[13] . Grass cloth with traditional characteristic produced by modern technology [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(05): 37-0.
[14] . Sizing effects of foam-sizing and warp pre-wetting combined process [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(12): 47-0.
[15] . Effects of weaving process on side-glowing properties of polymer optical fiber fabrics with different structures [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(7): 40-44.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!