JOURNAL OF TEXTILE RESEARCH ›› 2018, Vol. 39 ›› Issue (03): 61-66.doi: 10.13475/j.fzxb.20170603206

Previous Articles     Next Articles

Properties of pre-oxidized polyacrylonitrile / aramid fiber needled filters

  

  • Received:2017-06-09 Revised:2017-12-05 Online:2018-03-15 Published:2018-03-09

Abstract:

In order to obtain a low cost and high efficiency filter, the composite filters were prepared from pre-oxidized (PAN) fiber mixed with aramid fiber of different weight percentages. The morphology, fiber entanglement, mechanical properties, air permeability, pore size distribution and filter efficiency were characterized. The results indicated that the length of straight fiber segment can be used to evaluate the degree of fiber entanglement. Adding aramid fiber can enhance fiber entanglement, filter compactness, breaking strength and breaking elongation of the filters, and decreased the pore size. For the particles with diameters above 1.0 μm and 2.5 μm, when the aramid fiber weight percentage is lower than 10%, the filter efficiency of composite filters has no obvious change. However, when the aramid fiber weight percentage is more than 10%, the filter efficiency of composite filters increased significantly with the increase of aramid fiber weight percentage.

Key words: pre-oxidized polyacrylonitrile fiber, aramid fiber, filter efficiency, fiber entanglement, Hough transform

[1] . Spinning breakage detection based on optimized hough transform [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 36-41.
[2] . Influence of polyethylene oxide molecular weights on sizing performances of pre-oxidized polyacrylonitrile staple warps [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 78-83.
[3] . Preparation and properties of high temperature resistant ultrafiltration aramid nanofiber/PPS composite material [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(7): 1-4.
[4] . Dynamic measurement of fabric wrinkle recovery angle by video sequence [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(2): 55-60.
[5] SONG Cui-Yan, SONG Xi-Quan, DENG Zhao-Liang. Technology status and development trend of m-aramid fibers [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(6): 125-128.
[6] LI Wen-Tao, YAO Shu-Huan, PENG Shu-Ping, WU Meng, ZHANG Chao-Bo, ZHANG Zai-Xing. Thermal oxidizing aging properties of modified aromatic polyoxadiazoles fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(6): 151-154.
[7] WANG Chunxia;DU Mei;QIU Yiping. Influence of moisture regain on effects of atmospheric pressure plasma treatment [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(3): 36-41.
[8] LIANG Ping;WANG Lan;LIN Junxiong. Acting mechanism of carrier Cindye Dnk on aramid fibers [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(2): 21-25.
[9] PAN Ruru;GAO Weidong;LIU Jihong;WANG Hongbo. Automatic location of woven fabric crossing points via Hough transform [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(3): 59-63.
[10] QIAN Kun;CAO Haijian;SHENG Dongxiao;ZHUANG Suyu. Influence of low temperature plasma treatment on surface performance of aramid fibers [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(10): 10-13.
[11] YAN Zhiyun;SHI Hongqiao;LIU Anhua;JIA Demin. X-ray photoelectron spectroscopic analysis of surface modification of aramid fiber by low temperature plasma [J]. JOURNAL OF TEXTILE RESEARCH, 2007, 28(8): 19-22.
[12] CHENG Bo-wen;KANG Wei-min;JIAO Xiao-ning. Studies on melt-blown polypropylene composite fabric containing electret [J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(5): 8-10.
[13] JI Tao;ZHANG Qing;XIA Song-tao. Corrosion resistance properties of the pre-oxidized PAN fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(3): 24-25.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!