复合材料缝合技术的研究进展

doi:10.13475/j.fzxb.21090602909

Abstract

Abstract:

In order to better understand the research status of stitching technology of composite materials, the stitching methods and stitching parameters were introduced, the research on the mechanical properties of stitching composite materials and the development and application of stitching equipment at home and abroad were summarized. The influence of stitching technology on the mechanical properties of composite material was emphasized. It was proved that the stitching introduces continuous fibers in the thickness direction of the material, which can enhance the interlaminar fracture toughness of composites and improve the impact damage tolerance. Special attention was paid to the development status of the combination of stitching system and robot. Based on the existing equipment, the new equipment should be further innovated to promote the high-efficiency and intelligentization of the suturing technology of composite materials. Finally, the challenges and opportunities of the current development of suturing technology was put forward, and the development prospects of composite suture technology in the fields of aerospace, new energy and automobile were pointed out.

Key words: stitching technology, composite material, stitching parameter, stitching equipment

CLC Number:

TB33

WANG Xianfeng, GAO Tiancheng, XIAO Jun. Research progress of stitching technology of composite materials[J].Journal of Textile Research, 2019, 40(12): 169-177.

Figures/Tables 7

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

References 42

[1]	肖军, 李勇, 李建龙. 自动铺放技术在大型飞机复合材料结构件制造中的应用[J]. 航空制造技术, 2008(1):50-53.
	XIAO Jun, LI Yong, LI Jianlong. Application of automatic placement technology in the manufacture of large aircraft composite structural parts[J]. Aeronautical Manufacturing Technology, 2008(1):50-53.
[2]	YANG He, FAN Xiaoguang, SUN Zhicha, et al. Recent developments in plastic forming technology of titanium alloys[J]. Science China Technological Sciences, 2011,54(2):490-501.
[3]	矫桂琼, 宁荣昌, 卢智先. 层间增韧复合材料研究[J]. 宇航材料工艺, 2001(4):36-39.
	JIAO Guiqiong, NING Rongchang, LU Zhixian. Study on interlayer toughening composites[J]. Aerospace Materials and Technology, 2001(4):36-39.
[4]	韩雪梅, 李嘉禄, 焦亚男. 缝合连接三维编织复合材料技术[J]. 山东纺织科技, 2005(3):48-49.
	HAN Xuemei, LI Jialu, JIAO Yanan. Stitching connection three-dimensional braided composite technology[J]. Shandong Textile Science & Technology, 2005(3):48-49.
[5]	王善元, 张汝光. 纤维增强材料[M]. 上海: 东华大学出版社, 1998: 36-45.
	WANG Shanyuan, ZHANG Ruguang. Fiber Reinforced Material[M]. Shanghai: Donghua University Press, 1998: 36-45.
[6]	焦亚男, 李晓久, 董孚允. 三维缝合复合材料性能研究[J]. 纺织学报, 2002,23(2):96-99.
	JIAO Yanan, LI Xiaojiu, DONG Fuyun. Study on properties of three-dimensional stitched composites[J]. Journal of Textile Research, 2002,23(2):96-99.
[7]	张家莹. 缝合预成型体制备技术及复合材料性能研究[D]. 北京:北京航空航天大学, 2014: 12-14.
	ZHANG Jiaying. Preparation technology of stitched preforms and properties of composites[D]. Beijing: Beihang University, 2014: 12-14.
[8]	刘苏骅, 李崇俊, 嵇阿琳. Tufting缝合复合材料预制体的成型与研究进展[J]. 航空制造技术, 2017(14):88-92, 96.
	LIU Suhua, LI Chongjun, JI Alin. Progress in forming and research of tufting stitched composite preforms[J]. Aeronautical Manufacturing Technology, 2017(14):88-92, 96.
[9]	潘杰. 三维增强复合材料单面双针缝合装备技术研究[D]. 南京:南京航空航天大学, 2017: 20-31.
	PAN Jie. Research on the technology of single-sided two needles stitching equipment for 3D reinforced compo-sites[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2017: 20-31.
[10]	刘原. 剑麻纤维/环氧树脂复合材料的缝合增强[D]. 广州:中山大学, 2000: 32-34.
	LIU Yuan. Stitching reinforcement of sisal fiber/epoxy composite[D]. Guangzhou: Sun Yat-sen University, 2000: 32-34.
[11]	艾涛, 王汝敏. Kevlar缝合复合材料的研究进展[J]. 材料导报, 2005,19(1):64-69.
	AI Tao, WANG Rumin. Research progress of Kevlar stitching composites[J]. Materials Review, 2005,19(1):64-69.
[12]	吴刚, 赵龙, 高艳秋. 缝合技术在复合材料液体成型预制体中的应用研究[J]. 航空制造技术, 2012(Z2):70-72.
	WU Gang, ZHAO Long, GAO Yanqiu. Application research of stitching technology in composite liquid forming preforms[J]. Aeronautical Manufacturing Technology, 2012(Z2):70-72.
[13]	程小全, 赵龙, 张怡宁. 缝合复合材料可用性:简单层合板的基本性能[J]. 北京航空航天大学学报, 2003(11):1001-1005.
	CHENG Xiaoquan, ZHAO Long, ZHANG Yining. Stitched composite availability:basic performance of simple laminates[J]. Journal of Beijing University of Aeronautics and Astronautics, 2003(11):1001-1005.
[14]	WANG Y. Mechanical properties of stitched multiaxial fabric reinforced composites from mannual layup process[J]. Applied Composite Materials. 2002(9):81-97.
[15]	谈昆伦, 刘黎明, 刘千, 等. 缝合对复合材料力学性能的影响[J]. 纺织报告, 2012,28(5):32-34.
	TAN Kunlun, LIU Liming, LIU Qian, et al. Effect of stitching on mechanical properties of composites[J]. Textile Reports, 2012,28(5):32-34.
[16]	WU E B, WANG J, ENBOA W, et al. Behavior of stitched laminates under in-plane tensile and transverse impact loading[J]. Journal of Composite Materials, 1995,29(17):2254-2279.
[17]	LARSSON F. Damage tolerance of a stitched carbon/epoxy laminate[J]. Composites Part A:Applied Science & Manufacturing, 1997,28(11):923-934.
[18]	MOURITZ A P, COX B N. A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned composites[J]. Composites Part A:Applied Science & Manufacturing, 2010,41(6):709-728.
[19]	YUDHANTO A, WATANABE N, IWAHORI Y, et al. Effect of stitch density on tensile properties and damage mechanisms of stitched carbon/epoxy composites[J]. Composites Part A: Applied Science & Manufacturing, 2014,60(5):52-65.
[20]	李晨, 许希武, 汪海. 缝合复合材料层板面内力学性能试验与分析[J]. 南京航空航天大学学报, 2005,37(2):192-197.
	LI Chen, XU Xiwu, WANG Hai. Experimental and analysis of in-plane mechanical properties of stitched composite laminates[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2005,37(2):192-197.
[21]	吴扬, 段跃新. 缝合参数对缝纫平纹玻璃纤维织物复合材料弯曲性能的影响研究[J]. 玻璃钢/复合材料, 2011,24(6):24-27.
	WU Yang, DUAN Yuexin. Study on the influence of stitching parameters on the bending property of sewing tri-fibre fiberglass composites[J]. Fiber Reinforced Plastics/Composites, 2011,24(6):24-27.
[22]	王芳芳, 张方超, 吴晓青. 缝合工艺对复合材料面内力学性能影响实验研究[J]. 玻璃钢/复合材料, 2017(7):35-39.
	WANG Fangfang, ZHANG Fangchao, WU Xiaoqing. Experimental study on the effect of stitching process on in-plane mechanical properties of composites[J]. Fiber Reinforced Plastics/Composites, 2017(7):35-39.
[23]	IWAHORI Y, NAKANE K, WATANABE N. DCB test simulation of stitched CFRP laminates using interlaminar tension test results[J]. Composites Science and Technology, 2009,69(14):2315-2322.
[24]	PLAIN K P, TONG L. An experimental study on mode I and II fracture toughness of laminates stitched with a one-sided stitching technique[J]. Composites Part A: Applied Science and Manufacturing, 2011,42(2):203-210.
[25]	杜龙, 矫桂琼, 黄涛 .缝纫 T300 碳纤维/QY9512 双马树脂复合材料层间断裂韧性研究[C]// 中国力学学会 2009 学术大会论文集.西安:西北工业大学, 2009: 1-6.
	DU Long, JIAO Guiqiong, HUANG Tao. Study on interlaminar fracture toughness of sewing T300 carbon fiber/QY9512 double horse resin composites[C]// Proceedings of the 2009 Conference of the Chinese Society of Theoretical and Applied Mechanics. Xi'an Northwestern Polytechnical University, 2009: 1-6.
[26]	赵红平. 缝合CFRP 复合材料制备工艺与力学性能研究[D]. 北京:中国科学院力学研究所, 2003: 15-19.
	ZHAO Hongping. Study on preparation process and mechanical properties of stitched CFRP composites[D]. Beijing: Institute of Mechanics, Chinese Academy of Sciences, 2003: 15-19.
[27]	LOMBETTI D M. Tufting of complex composite structures[D]. England:Cranfield University, 2015: 6-15.
[28]	RAVANDI M, TEO W S, YONG M S, et al. Prediction of mode I interlaminar fracture toughness of stitched flax fiber composites[J]. Journal of Materials Science, 2018,53(6):4173-4188.
[29]	朱华东, 矫桂琼, 杨宝宁. 缝合复合材料 II 型层间断裂特性研究[J]. 复合材料学报, 2001,18(2):85-89.
	ZHU Huadong, JIAO Guiqiong, YANG Baoning. Study on II-interlaminar fracture characteristics of stitched composites[J]. Acta Materiae Compositae Sinica, 2001,18(2):85-89.
[30]	滑聪. 缝合复合材料层合板的制备及性能研究[D]. 武汉:武汉理工大学, 2013: 29-33.
	HUA Cong. Preparation and properties of stitched composite laminates[D]. Wuhan: Wuhan University of Technology, 2013: 29-33.
[31]	YOVANOF N, LOVEJOY A E, BARAJA J, et al. Design, analysis and testing of a PRSEUS pressure cube to investigate assembly joints[J]. 2012,476(23):38-46.
[32]	BEDNARCYK B, YARRINGTON P, LUCKING R, et al. Efficient design and analysis of lightweight reinforced core sandwich and PRSEUS structures[C]// 19th AIAA/ASME/AHS Adaptive Structures Conference. Denver: Internet Society, 2011: 24-33.
[33]	LI V. Hybrid wing body (HWB) aircraft design and optimization using stitched composites[C]// 16th AIAA/ISSMO Multidisciplinary Analysis & Optimization Conference. Dallas: AIAA, 2013: 46-57.
[34]	LINTON K A, VELICKI A, HOFFMAN K, et al. PRSEUS panel fabrication final report[J]. Composites Part A: Applied Science and Manufacturing, 2014,385(26):26-34.
[35]	VELICKI A, INTRODUCTION I, ENGINEER P M. Advanced structural concept development using stitched composites[C]// AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference. Schanmburg: ACM, 2008: 55-70.
[36]	ELICKI A, JEGLEY D C. PRSEUS structural concept development[C]// Aerospace Sciences Meeting. NJ: IEEE, 2006: 29-41.
[37]	GNABA I, LEGRAND X, WANG P, et al. Through-the-thickness reinforcement for composite structures: a review[J]. Journal of Industrial Textiles, 2018,24(2):12-16.
[38]	WITTIG J. Recent development in the robotic stitching technology for textile structural composites[J]. Journal of Textile and Apparel, Technology and Management, 2001,33:540-550.
[39]	LAOURINE E. Einseitige Nähtechnikf ür die Herstellung vondre idimen-sionalen Faserverbundbauteilen[D]. Auchen: RWTH Aachen University, 2005: 67-70.
[40]	RICHTSFELD M, BIEGELBAUER G, WOHLKINGER W, et al. Sensor-based robotics for fully automated fibre-mat stitching[C]// Aerospace Sciences Meeting. KOS: IEEE, 2015, 221-249.
[41]	姚福林. 纺织复合材料单边缝合机械手系统及其缝合行为研究[D]. 天津:天津工业大学, 2016: 39-45.
	YAO Fulin. Study on the unilateral stitching manipulator system of textile composites and its stitching behavior[D]. Tianjin: Tianjin Polytechnic University, 2016: 39-45.
[42]	姜海珍. 三维纺织复合材料预制件缝合机器人视觉跟踪系统的研究[D]. 天津:天津工业大学, 2008: 46-59.
	JIANG Haizhen. Research on visual tracking system of 3D textile composite prefabricated sewing robot[D]. Tianjin: Tianjin Polytechnic University, 2008: 46-59.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

Comments

Recommended 0

No Suggested Reading articles found!

Research progress of stitching technology of composite materials

RichHTML

PDF (PC)

Abstract

Cite this article

share this article

Figures/Tables 7

References 42

Related Articles 15

Metrics

Comments

Recommended 0

[1]	SONG Xing, JIN Xiaoke, ZHU Chengyan, CAI Fengjie, TIAN Wei. 3D printing and mechanical properties of glass fiber/photosensitive resin composites [J]. Journal of Textile Research, 2021, 42(01): 73-77.
[2]	LÜ Qingtao, ZHAO Shibo, DU Peijian, CHEN Li. Research status of fatigue properties characterization and analysis methods of resin matrix composites [J]. Journal of Textile Research, 2021, 42(01): 181-189.
[3]	LI Haoyi, XU Hao, CHEN Mingjun, YANG Tao, CHEN Xiaoqing, YAN Hua, YANG Weimin. Research progress of noise reduction by nanofibers [J]. Journal of Textile Research, 2020, 41(11): 168-173.
[4]	LI Liping, WU Daoyi, ZHAN Yikai, HE Min. Review on carbon fiber surface modification using electrophoretic deposition of carbon nanotubes and graphene oxide [J]. Journal of Textile Research, 2020, 41(06): 168-173.
[5]	CHEN Lifu, YU Weidong. Stab resistance of composites with synthetic diamond filled polyimide resin matrix [J]. Journal of Textile Research, 2020, 41(05): 38-44.
[6]	LI Peng, WAN Zhenkai, JIA Minrui. Damage monitoring of composite materials based on twist energy of carbon nanotube yarns [J]. Journal of Textile Research, 2020, 41(04): 58-63.
[7]	ZHANG Hengyu, ZHANG Xiansheng, XIAO Hong, SHI Meiwu. Research progress of two-dimensional carbide in field of flexible electromagnetic absorbing [J]. Journal of Textile Research, 2020, 41(03): 182-187.
[8]	LI Yuzhou, ZHANG Yufan, ZHOU Qingqing, CHEN Guoqiang, XING Tieling. Preparation and electrochemical properties of MnO₂/graphene/cotton fabric composite electrode [J]. Journal of Textile Research, 2020, 41(01): 96-101.
[9]	SONG Xing, ZHU Chengyan, CAI Fengjie, LÜ Zhining, TIAN Wei. Influence of alkali treatment on mechanical properties of polyester/photosensitive resin composites [J]. Journal of Textile Research, 2019, 40(07): 97-102.
[10]	WANG Xinhou, ZHANG Linmei, SUN Xiaoxia. Preparation of flexible puncture-proof polyester/SiC and puncture-proof property [J]. Journal of Textile Research, 2019, 40(06): 171-175.
[11]	MIAO Runwu, JIN Lihua, WEI Qiyu, HAN Xiao, HONG Jianhan. Preparation and electromagnetic shielding property of conductive poly(p-phenylene terephamide) of reinforced composite materials [J]. Journal of Textile Research, 2019, 40(02): 100-104.
[12]	. Research progress on graphene/silk composite materials [J]. Journal of Textile Research, 2018, 39(10): 168-174.
[13]	. Preparation and properties of self-weaving composites of bacterial cellulose/polyester [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 126-131.
[14]	. Fabrication and sound absorption properties of waste fiber composite materials [J]. Journal of Textile Research, 2016, 37(2): 39-43.
[15]	. Research progress in radome material [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(12): 153-159.