Journal of Textile Research ›› 2019, Vol. 40 ›› Issue (12): 27-31.doi: 10.13475/j.fzxb.20181205305

• Fiber Materials • Previous Articles     Next Articles

Influence of pressure on rheological behavior of polyethylene terephthalate-polyamide 6 copolymer/polyamide 6 blends

GUO Zengge1, JIANG Zhaohui1(), JIA Zhao1, PU Congcong1, LI Xin2, CHENG Bowen3   

  1. 1. Lutai School of Textile and Apparel, Shandong University of Technology, Zibo, Shandong 255000
    2. State Key Laboratory of Biobased Fiber Manufacturing Technology, China Textile Academy, Beijing 100025, China
    3. State Key Laboratory of Separation Membranes and Membrane Processes, Tiangong University, Tianjin 300387, China
  • Received:2018-12-25 Revised:2019-08-15 Online:2019-12-15 Published:2019-12-18
  • Contact: JIANG Zhaohui E-mail:jiangzhaohui@sdut.edu.cn

Abstract:

In order to study the rheological properties of polymers under high pressure, blends of polyethylene terephthalate-polyamide 6 copolymer (PET-PA6) and polyamide 6(PA6) were prepared by melt blending and co-extruding. The influence of pressure, shear rate and temperature on the rheological behavior of PET-PA6/PA6 blends were studied under the conditions of the outlet pressure of the capillary tube of 5-50 MPa controlled by a cock mounted at the end of the reverse pressure chamber. The results indicate that the shear viscosity of PET-PA6/PA6 blends conforms to the Barus equation with the change of pressure. At a constant shear rate, the shear viscosity of PET-PA6/PA6 blends increases gradually with the capillary pressure. When the shear rate is increased from 108 s-1 to 1 080 s-1, the pressure coefficient decreases by 19.24%, and when the temperature is increased from 265 to 290 ℃, the pressure coefficient decreases by 32.33%. The dependence of shear viscosity of PET-PA6/PA6 blends on pressure decreases with the shear rate and the temperature.

Key words: polyethylene terephthalate-polyamide 6 copolymer, polyamide 6, shear viscosity, rheological behavior, pressure coefficient

CLC Number: 

  • TQ311

Fig.1

Diagram of reverse pressure chamber structure"

Fig.2

Relationship between η and Pm at different temperature"

Tab.1

Δη of mixture at different temperature and shear rates"

γ·a/
s-1
Δη/(Pa·s)
265 ℃ 270 ℃ 275 ℃ 280 ℃ 285 ℃ 290 ℃
108 194.67 187.67 115.85 99.87 93.87 91.87
216 168.98 182.97 109.13 94.95 86.90 85.92
432 164.85 156.94 99.81 86.21 84.34 83.34
648 140.19 130.19 90.06 80.30 77.30 76.30
864 114.49 111.49 79.91 74.09 73.09 69.09
1 080 94.81 88.81 69.14 66.14 63.79 63.14

Fig.3

Relationship between η and Pm of mixture"

Tab.2

Average pressure coefficients at different shear rates and temperatures"

γ·a 108 s-1 216 s-1 432 s-1 648 s-1 864 s-1 1 080 s-1
β 15.95 15.30 14.36 13.52 13.00 12.88
T 265 ℃ 270 ℃ 275 ℃ 280 ℃ 285 ℃ 290 ℃
β 16.92 16.05 14.83 13.42 12.34 11.45
[1] HARIFI T, MONTAZER M. Free carrier dyeing of polyester fabric using nano TiO2[J]. Dyes and Pigments, 2013,97(3):440-445.
[2] ALBITRES G A V, MENDES L C, CESTARI S P. Polymer blends of polyamide-6/spandex fabric scraps and recycled poly (ethylene terephthalate)[J]. Journal of Thermal Analysis and Calorimetry, 2017,129(3):1505-1515.
[3] JI X, XU Y, ZHANG W, et al. Review of functionalization, structure and properties of graphene/polymer composite fibers[J]. Composites Part A: Applied Science and Manufacturing, 2016,87:29-45.
[4] LIU X, XIE M, LI Y, et al. Study on the reduction properties of thiourea dioxide and its application in discharge printing of polyester fabrics[J]. Fibers and Polymers, 2018,19(6):1237-1244.
[5] HUSSAIN T, TAUSIF M, ASHRAF M. A review of progress in the dyeing of eco-friendly aliphatic polyester-based polylactic acid fabrics[J]. Journal of Cleaner Production, 2015,108:476-483.
[6] 柳毅琨, 邱志成, 金剑. PET-PA/PA6共混纤维的酸性染料染色性能[J]. 合成纤维工业, 2015,38(1):29-32.
LIU Yikun, QIU Zhicheng, JIN Jian. Dyeing behavior of acid dyes on PET-PA/PA6 blend fiber[J]. China Synthetic Fiber Industry, 2015,38(1):29-32.
[7] KIM K, RAHIMI S K, ALAM T M, et al. Unexpected effects of inorganic phosphate glass on crystallization and thermo-rheological behavior of polyethylene terephtha-late[J]. Polymer, 2018,154:135-147.
[8] NADOOSHAN A A, ESHGARF H, AFRAND M. Evaluating the effects of different parameters on rheological behavior of nanofluids: a comprehensive review[J]. Powder Technology, 2018,338:342-353.
[9] NUMMAN D, WEIZMAN O, AMIR E, et al. Development and characterization of expanded graphite filled-PET/PVDF blend: thermodynamic and kinetic effects[J]. Polymers for Advanced Technologies, 2017,28(5):590-599.
[10] RIZVI A, ANDALIB Z K M, PARK C B. Fiber-spun polypropylene/polyethylene terephthalate microfibrillar composites with enhanced tensile and rheological properties and foaming ability[J]. Polymer, 2017,110:139-148.
[11] SULYMAN M, HAPONIUK J, FORMELA K. Utilization of recycled polyethylene terephthalate (PET) in engineering materials: a review[J]. International Journal of Environmental Science and Development, 2016,7(2):100-108.
[12] COUCH M A, BINDING D M. High pressure capillary rheometry of polymeric fluids[J]. Polymer, 2000,41:6323-6334.
[13] CHREMOS A, JEONG C, DOUGLAS J F. Influence of polymer architectures on diffusion in unentangled polymer melts[J]. Soft Matter, 2017,13(34):5778-5784.
doi: 10.1039/c7sm01018d pmid: 28766667
[14] JING C, ZUOWEI W. Microscopic picture of constraint release effects in entangled star polymer melts[J]. Macromolecules, 2016,49(15):5677-5691.
[15] XIAN W, SONG L, LIU B, et al. Rheological and mechanical properties of thermoplastic polyurethane elastomer derived from CO2 copolymer diol[J]. Journal of Applied Polymer Science, 2018,135(11):45974.
doi: 10.1002/app.45974
[1] DUO Yongchao, QIAN Xiaoming, ZHAO Baobao, QIAN Yao, ZOU Zhiwei. Preparation and properties of microfiber synthetic leather base [J]. Journal of Textile Research, 2020, 41(09): 81-87.
[2] ZHANG Jiao, GAO Xuefeng, WANG Yuzhou, LIU Haihui, ZHANG Xingxiang. Preparation and properties of polyamide 66/amino-functionalized multi-walled carbon nanotubes fibers [J]. Journal of Textile Research, 2019, 40(11): 1-8.
[3] PAN Weinan, XIANG Hengxue, ZHAI Gongxun, NI Mingda, SHEN Jiaguang, ZHU Meifang. Influence of relative molecular weight of copolyamide 6/66 on crystallization and rheological properties thereof [J]. Journal of Textile Research, 2019, 40(09): 8-14.
[4] . Analysis on components properties of alkali-soluble polyester/polyamide 6 sea island fiber [J]. Journal of Textile Research, 2018, 39(09): 15-21.
[5] . Preparation and performance of pentaerythritol phosphate/zine diethyl phosphate synergistic flame retardant polyamide 6 [J]. Journal of Textile Research, 2018, 39(09): 8-14.
[6] . Testing and characterizing of filament breakage of multifilament yarn [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(06): 29-35.
[7] . Preparation and characterization of sheath-core energy storage and thermo-regulated composite fibers of polyamide 6 [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 1-8.
[8] . Influence of softening treatment on properties of polyester/polyamide 6 hollow segmented-pie ultrafine fiber nonwovens [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(03): 114-119.
[9] . Crystallization behavior of bio-based polyamide 56 fibers [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(12): 7-13.
[10] . Preparation and characterization of electrospun polyamide 6 nanofibrous membranes [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(03): 6-12.
[11] . Rheological behavior of dyeable polyester melt [J]. Journal of Textile Research, 2015, 36(07): 1-6.
[12] . Preparation and properties of electrospun composite material for high-efficiency ash filtration [J]. Journal of Textile Research, 2015, 36(07): 12-16.
[13] . Effects of hydrostatic pressure on rheological behavior of PET with different intrinsic viscosity [J]. Journal of Textile Research, 2015, 36(06): 13-17.
[14] . Rheology and wettability of chitosan /hydroxypropyl cellulose blend materials [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(5): 25-29.
[15] .  Effect of pigments on spectral properties of colored luminous fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(2): 40-44.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!