Journal of Textile Research ›› 2020, Vol. 41 ›› Issue (12): 166-173.doi: 10.13475/j.fzxb.20191004608
• Comprehensive Review • Previous Articles Next Articles
CLC Number:
[1] | FRANCESONI L, AYMERICH F. Effect of stitching on the flexure after impact behavior of thin laminated composites[J]. Proceedings of the Institution of Mechanical Engineers Part C:Journal of Mechanical Engineering Science, 2018,232(8):1374-1388. |
[2] |
CHOI S, DOUGLAS E P. Complex hygrothermal effects on the glass transition of an epoxy-amine thermoset[J]. ACS Applied Materials & Interfaces, 2010,2(3):934-941.
doi: 10.1021/am9009346 pmid: 20356301 |
[3] | TOSCANO A, PITARRESI G, SCAFIDI M. Water diffusion and swelling stresses in highly crosslinked epoxy matrices[J]. Polymer Degradation and Stability, 2016,133:255-263. |
[4] |
SETHI S, RAY B C. Environmental effects on fibre reinforced polymeric composites: evolving reasons and remarks on interfacial strength and stability[J]. Advances in Colloid & Interface Science, 2015,217:43-67.
doi: 10.1016/j.cis.2014.12.005 pmid: 25578406 |
[5] | SURATHI P, KARBHARI V M. Hygrothermal effects on durability and moisture kinetics of fiber-reinforced polymer composites[D]. San Diego:University of California, 2006: 8-35. |
[6] | MOURTIZAS A P, LEONGB K H, HERSZBERGC I. A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites[J]. Composites Part A: Applied Science & Manufacturing, 1997,28:979-991. |
[7] | BOISSEAU A, PEYRAL C. Long term durability of composites in marine environment: comparative study of fatigue behavior[J]. Procedia Engineering, 2015,133:535-544. |
[8] | DAVIDSON B D, KUMAR M, SOFFA M A. Influence of mode ratio and hygrothermal condition on the delamination toughness of a thermoplastic particulate interlayered carbon/epoxy composite[J]. Composites Part A:Applied Science & Manufacturing, 2009,40(1):67-79. |
[9] | ZENASNI R, BACHIR A S, ARGUELLES A, et al. Effect of hygrothermomechanical aging on the interlaminar fracture behavior of woven fabric fiber/PEI composite materials[J]. Journal of Thermoplastic Composite Materials, 2016,19:385-398. |
[10] | 双超. 湿热老化对碳纤维复合材料界面及抗冲击性能影响研究[D]. 南京:南京航空航天大学, 2018: 22-42. |
SHUANG Chao. Effect of hygrothermal aging on interface properties and impact resistance of carbon fiber composite material[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2018: 22-42. | |
[11] |
SHIINO M Y, MONTORO S R, DONADAN M V, et al. Hygrothermal effect on composites under in-plane fatigue at stress ratios of r=-1 and r=0.1:an analysis of quasi-isotropic stitched carbon fibers[J]. Journal of Materials Engineering and Performance, 2018,27(11):5964-5972.
doi: 10.1007/s11665-018-3584-3 |
[12] |
LIU H, LI M, LU Z Y, et al. Multiscale simulation study on the curing reaction and the network structure in a typical epoxy system[J]. Macromolecules, 2011,44:8650-8660.
doi: 10.1021/ma201390k |
[13] |
SELZER R, FRIEDRICH K. Influence of water up-take on interlaminar fracture properties of carbon fibre-reinforced polymer composites[J]. Journal of Materials Science, 1995,30(2):334-338.
doi: 10.1007/BF00354392 |
[14] |
SELZER R, FRIEDRICH K. Mechanical properties and failure behaviour of carbon fibre-reinforced polymer composites under the influence of moisture[J]. Composites Part A:Applied Science and Manufacturing, 1997,28:595-604.
doi: 10.1016/S1359-835X(96)00154-6 |
[15] | 程小全, 郦正能, 赵龙. 缝合复合材料的应用与力学性能[J]. 高分子材料科学与工程, 2009,25(3):145-149. |
CHENG Xiaoquan, LI Zhengneng, ZHAO Long. Application and mechanical properties of stitched composite structures[J]. Polymer Materials Science & Engineering, 2009,25(3):145-149. | |
[16] |
WOOD M D K, SUN X, TONG L, et al. The effect of stitch distribution on Mode I delamination toughness of stitched laminated composites-experimental results and FEA simulation[J]. Composites Science and Technology, 2007,67(6):1058-1072.
doi: 10.1016/j.compscitech.2006.06.002 |
[17] |
ALMANSOUR F A, DHAKAL H N, ZHANG Z Y. Effect of water absorption on Mode I interlaminar fracture toughness of flax/basalt reinforced vinyl ester hybrid composites[J]. Composite Structures, 2017,168:813-825.
doi: 10.1016/j.compstruct.2017.02.081 |
[18] | HAN W, ZHANG H P, XU X, et al. Hybrid enhancements by polydopamine and nanosilica on carbon fibre reinforced polymer laminates under marine environment[J]. Composites Part A:Applied Science and Manufacturing, 2018,112:283-289. |
[19] | TAO A, WANG R, WANG Z, et al. The influence of surface treatment of stitch threads and stitching on interlaminar properties of unidirectional laminates[J]. Composite Interfaces, 2016,23(4):373-382. |
[20] | GREENHALGHE S, SINGH S. The effect of moisture, matrix, and ply orientation on delamination resistance, failure criteria and fracture morphology in CFRP[M]// ZUREICK A H M,NETTLES A T. Composite Materials: Testing, Design, and Acceptance Criteria. West Conshohocken:ASTM International, 2002: 101-221. |
[21] | TODO M, NAKAMURA T, TAKAHASHI K. Effects of moisture absorption on the dynamic interlaminar fracture toughness of carbon/epoxy composites[J]. Journal of Composite Materials, 2000,34(8):630-648. |
[22] | KIM H S, WANG W X, TAKAO Y, et al. Effects of temperature on Mode II fracture toughness of multidirectional CFRP laminates[J]. International Journal of Modern Physics B, 2003,17(8/9):1717-1723. |
[23] | LADANI R B, NGUYEN A T, WANG C H, et al. Mode II interlaminar delamination resistance and healing performance of 3D composites with hybrid z-fibre reinforcement[J]. Composites Part A: Applied Science and Manufacturing, 2019,120:21-32. |
[24] |
JAIN L K, DRANSFIELDB K A, MA Y. On the effects of stitching in CFRPs: II: Mode II delamination toughness[J]. Composites Science and Technology, 1998,58:829-837.
doi: 10.1016/S0266-3538(97)00186-3 |
[25] | ALMANSOUR F A, DHAKAL H N, ZHANG Z Y. Investigation into Mode II interlaminar fracture toughness characteristics of flax/basalt reinforced vinyl ester hybrid composites[J]. Composites Science and Technology, 2018,154:117-127. |
[26] | BHUDOLIA S K, KAM K C K, PERROTEY P, et al. Effect of fixation stitches on out-of-plane response of textile non-crimp fabric composites[J]. Journal of Industrial Textiles, 2019,48(7):1151-1166. |
[27] | MOKHTAR H, SICOT O, ROUSSEANU L, et al. The Influence of ageing on the impact damage of carbon epoxy composites[J]. Procedia Engineering, 2011,10(7):2615-2620. |
[28] | QI B. The residual compression strength of stitched and unstitched plain-weave carbon/epoxy laminates after impact and hygrothermal cycling[C]// HERSZBERG I, BANNISTER M K. Proceedings of the 11th International Conference on Composite Materials. Queensland:Gold Coast, 1997: 149-159. |
[29] | FRANCESCONI L, AYMERICH F. Effect of stitching on the flexure after impact behavior of thin laminated composites[J]. Journal of Mechanical Engineering Science, 2018,232(8):1374-1388. |
[30] | BYUN J H. Impact properties of laminated composites with stitching fibers[C]// SONG S W,LEE C H.15th International Conference on Composite Mate-rials (ICCM-15). Durban:Composite Structures Ltd, 200:6. |
[31] | CHEN G, CHENG X, LI Z, et al. Hygrothermal properties of stitched and unstitched uniweave T300/QY9512 laminates (with a hole)[J]. Journal of Reinforced Plastics and Composites, 2004,23(15):1663-1671. |
[32] |
LIU D. Delamination resistance in stitched and unstitched composite plates subjected to impact loading[J]. Journal of Reinforced Plastics and Composites, 1990,9(1):59-69.
doi: 10.1177/073168449000900104 |
[33] | AYMERICH F, PANI C, PRIOL O. Effect of stitching on the low-velocity impact response of [03/903]s graphite/epoxy laminates[J]. Composites Part A:Applied Science and Manufacturing, 2007,38(4):1174-1182. |
[34] | BORTLUZZI D B, GOMES F G, HIRAYAMA D, et al. Development of a 3D reinforcement by tufting in carbon fiber/epoxy composites[J]. International Journal of Advanced Manufacturing Technology, 2019,100(5-8):1593-1605. |
[35] |
AN W J, KIM C H, CHOI J H, et al. Static strength of RTM composite joint with I-fiber stitching process[J]. Composite Structures, 2019,210:348-353.
doi: 10.1016/j.compstruct.2018.11.072 |
[36] | KANG T J, LEE S H. Effect of stitching on the mechanical and impact properties of woven laminate composite[J]. Journal of Composite Materials, 1994,28:1574-1587. |
[37] | DICJINSIN L C, FARLEY G L, HINDERS M K. Prediction of effective three-dimensional elastic constants of translaminar reinforced composites[J]. Journal of Composite Materials 1999,33:1002-1029. |
[38] | CHENG X Q, BAI G Y, LI Z N. Effects of stitching parameters on tensile strength of FRPs under hygrothermal conditions[J]. Advanced Materials Research, 2012,570:63-77. |
[39] | 程小全, 郦正能, 寇长河. 缝合复合材料可用性:一般层合板的基本性能[J]. 复合材料学报, 2004(4):71-76. |
CHENG Xiaoquan, LI Zhengneng, KOU Changhe. Properties of stitched composite laminates: the principal properties of general laminates[J]. Acta Materiae Compositae Sinica, 2004(4):71-76. | |
[40] |
HUANG Tao, JIAO Guiqiong, XU Tingting. Tensile and shear properties of stitched laminates in hygrothermal environment[J]. Key Engineering Materials, 2006, 326-328:1753-1756.
doi: 10.4028/www.scientific.net/KEM.326-328 |
[41] | 黄涛, 矫桂琼. 湿热环境下缝合层压板的拉伸和剪切性能[J]. 强度与环境, 2006,33(2):45-49. |
HUANG Tao, JIAO Guiqiong. Tension and shear properties of stitched laminates in hydrothermal environment[J]. Structure & Environment Engineering, 2006,33(2):45-49. | |
[42] |
ZHENG Y, CHENG X, YASIR B. Effect of stitching on plain and open-hole strength of CFRP laminates[J]. Chinese Journal of Aeronautics, 2012,25(3):473-484.
doi: 10.1016/S1000-9361(11)60411-1 |
[43] | BILLISIK K, ERDOGAN G, SAPANCI E, et al. In-plane response of para-aramid/phenolic nanostitched and nanoprepreg 3D composites under tensile loading[J]. Polymer Composites, 2019,40(4):1275-1286. |
[44] | BILLISIK K, KARADUMAN S N, SAPANCIL E, et al. Flexural characterization of 3D prepreg/stitched carbon/epoxy/multiwalled carbon nanotube preforms and composites[J]. Journal of Composite Materials, 2019,53(5):563-577. |
[45] | 程小全, 郦正能, 赵龙. 缝合复合材料制备工艺和力学性能研究[J]. 力学进展, 2009,39(1):89-102. |
CHENG Xiaoquan, LI Zhengneng, ZHAO Long. Study on preparation process and mechanical properties of stitched composites[J]. Advances in Mechanics, 2009,39(1):89-102. | |
[46] | WALKER J, ROUMDY L, GOERING J. Effects of thermal and moisture cycling on the internal structure of stitched RTM laminates[C]// ROUNDY J. Third NASA Advanced Composites Technology Conference. Long Beach:Douglas Aircraft Co Inc, 1993: 415-432. |
[47] | FURROW K W, LOOS A C, CANO R J. Environmental effects on stitched RTM textile composites[J]. Journal of Reinforced Plactics and Composites, 1996,15(4):378-419. |
[48] | NESER G. Polymer based composites in marine use: history and future trends[J]. Procedia Engineering, 2017,194:19-24. |
[49] | 施军, 黄卓. 复合材料在海洋船舶中的应用[J]. 玻璃钢/复合材料, 2012(S1):269-273. |
SHI Jun, HUANG Zhuo. Application of composite material in the marine structures[J]. Fiber Reinforced Plastics/Composites, 2012(S1):269-273. | |
[50] | NISRIN A. Electromagnetic interference shielding of stitched carbon fiber composites[J]. Journal of Industrial Textiles, 2020,49(6):773-790. |
[51] | ABDELA N R, DONALDSON S. Interlaminar fracture toughness and electromagnetic interference shielding of hybrid-stitched carbon fiber composites[J]. Journal of Reinforced Plastics and Composites, 2018,37(18):1131-1141. |
[52] | KUMAR S A, UDDIN N M, RAHMAN M, et al. Introducing graphene thin films into carbon fiber composite structures for lightning strike protection[J]. Polymer Composites, 2019,40:517-525. |
[53] | 彭海俊, 秦志文, 王继辉, 等. 胶接面纤维铺层角度对复合材料胶接应力和强度影响分析[J]. 玻璃钢/复合材料, 2017(4):29-34. |
PENG Haijun, QIN Zhiwen, WANG Jihui, et al. Analysis of interface ply angle effects on stress distribution and failure force of composite joint[J]. Fiber Reinforced Plastics/Composites, 2017(4):29-34. | |
[54] |
RAMAN V, DRISSI H M, GUILLAUMAY L, et al. Numerical simulation analysis as a tool to identify areas of weakness in a turbine wind-blade and solutions for their reinforcement[J]. Composites Part B: Engineering, 2016,103:23-39.
doi: 10.1016/j.compositesb.2016.07.018 |
[55] | DAVIES P. Environmental degradation of composites for marine structures: new materials and new applica-tions[J]. Philosophical Transactions of the Royal Society A Mathematical Physical & Engineering Sciences, 2016,374(2071):20150272. |
[56] | 于礼玮, 曹维宇. 碳纤维复合材料在海洋中的应用[J]. 化工新型材料, 2016,44(8):4-5. |
YU Liwei, CAO Weiyu. Application of carbon fiber composite in marine area[J]. New Chemical Materials, 2016,44(8):4-5. | |
[57] | SUN X S, CHEN Y, TAN V B C, et al. Homogenization and stress analysis of multilayered composite offshore production risers[J]. Journal of Applied Mechanics, 2014,81(3):1-11. |
[58] | 孙微, 贺福. 碳纤维复合材料在海底油田领域中的应用[J]. 高科技纤维与应用, 2009,34(2):35-37. |
SUN Wei, HE Fu. The application of carbon fiber composite materials in subsea oil field[J]. Hi-Tech Fiber & Application, 2009,34(2):35-37. |
[1] | ZHANG Guo-li;LI Jia-lu;LI Xue-ming. T型壁板RFI缝合复合材料的屈曲性能 [J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(3): 67-70. |
|